pcsclite/website/unsupported.ini

; **************************************************************************
;                    Broken or partly supported
; **************************************************************************

[ACR122U_PICC.txt]
image = acr122.png
url = http://acs.com.hk/acr122.php
note = Time extension requests are not supported.
 Firmwares version < 2.06 are bogus: APDU with 0x7B (123) bytes expected do not work with a 14443 card. The reader returns SW=63 00 instead.
features = contactless
[ActivCardV2.txt]
image = ActivCard.png
url = http://www.activcorp.com/en/products/4_3_2_readers.php
note = The reader do timeout when a special USB frame is sent from the reader. If the frame size if a multiple of wMaxPacketSize the communication is stopped.
 Some users report that this reader is in fact a SCR-331 with a different firmware and that you can upgrade its firmware to transform it into a (supported) SCR-331 reader.
[Aladdin_eToken_PRO_USB_72K_Java.txt]
image = aladdin_pro.png
url = http://www.aladdin.com/etoken/devices/pro-usb.aspx
note = The token does not work after a warm reset. See http://www.opensc-project.org/pipermail/opensc-devel/2009-April/012128.html
[Athena_IDProtect_Key.txt]
note = PPS to set the card in T=1 fails. See http://www.opensc-project.org/pipermail/opensc-user/2010-May/004023.html
[BludriveII.txt]
image = BludriveII_CCID.png
url = http://shop.blutronics.com/ViewProdotti.asp?IdMarca=3&Id=751
note = The USB descriptor is bogus and the patch in get_ccid_usb_interface() does not work with libusb-1.0 
[Broadcom_5880v2.txt]
note = Found in Dell E6400 laptop
 The reader reports "Hardware error" to GetSlotStatus when no card is present.
[Feitian_SCR301.txt]
iManufacturer = Feitian
image = Feitian-Rockey301-CCID.png
url = http://www.ftsafe.com/products/reader301.html
note = The reader fails with a CASE 2 APDU with Le=0 (256 bytes)
 Sent: 80 34 01 00 00 
 ifdhandler.c:1219:IFDHTransmitToICC() no name (lun: 0)
 commands.c:1542:CmdXfrBlockTPDU_T0() T=0: 5 bytes
 -> 000000 6F 05 00 00 00 00 07 00 00 00 80 34 01 00 00 
 <- 000000 80 00 00 00 00 00 07 40 FE 00 
 commands.c:1316:CCID_Receive Card absent or mute
 And time extension requests are not forwarded back to the host.
[HP_kus-0133.txt]
note = SetParameters fails with a card of ATR 3B 16 96 41 73 74 72 69 64. The smart card reader part is from SCM.
[iDream.txt]
image = THRC2002-2.png
url = http://www.idream.be/consulter.php?pid=50&tab=2
note = also known as ID-SMID01  and maybe other commercial names
 PPS fails with a Cryptoflex card
 Powerup fails with a Setcos card
[LTC31.txt]
image = LTC31.png
url = "http://www.c3po.es/ltc31.html
note = The reader works fine with Linux kernel 2.4 but does not with Linux kernel 2.6. The ioctl() syscall returns EINVAL (Invalid argument). This reader is not more sold and replaced by the LTC31v2 model.
[mIDentity.txt]
image = kobil_midentity.png
url = http://www.kobil.com/index.php?id=49&type=7
note = Time requests are not managed correctly and make the firmware fails.  This is not a problem unless you use a time-consuming APDU like RSA key generation.

 A new firmware will correct the bug.
[mIDentityXL.txt]
image = kobil_midentity.png
url = http://www.kobil.com/index.php?id=49&type=7
note = Time requests are not managed correctly and make the firmware fails.  This is not a problem unless you use a time-consuming APDU like RSA key generation.

 A new firmware will correct the bug.
[Oberthur-CosmoCard1.txt]
note = the reader responds with bResponseType not defined in ICCD v1.0 specification. See http://archives.neohapsis.com/archives/dev/muscle/2009-q4/0059.html
[Oz776S.txt]
note = This reader is common as an internal reader in laptops like the Dell D420 or D820.
 The ATR may be corrupted by a 90 00 at the end
 The reader is bogus and does not accept PPS
[Oz776_7772.txt]
note = This reader is common as an internal reader in laptops.
 The reader is bogus and does not accept PPS
[Precise_200_MC.txt]
image = Precise200MC.png
url = http://precisebiometrics.com/?id=2718&cid=2722
note = Must be firmware version 50.00 or above: time extension requests are not sent back to the host in earlier versions of the firmware. The reader can't talk to card with TA1=96. See http://archives.neohapsis.com/archives/dev/muscle/2010-q3/0197.html
[Precise_250_MC.txt]
image = Precise250MC.png
url = http://precisebiometrics.com/?id=2718&cid=2723
note = Must be firmware version 50.00 or above: time extension requests are not sent back to the host in earlier versions of the firmware. The reader can't talk to card with TA1=96. See http://archives.neohapsis.com/archives/dev/muscle/2010-q3/0197.html
[ReinerSCT.txt]
image = reiner-pinpad.png
url = http://www.reiner-sct.com/content/view/4/16/
note = Time requests are not managed and the driver may time out without any response from the reader.  This is not a problem unless you use a time-consuming APDU like RSA key generation.
 Reiner provides a free software driver for this reader: http://support.reiner-sct.de/
[Smart_SBV280.txt]
url = http://www2.smarttech.com/st/en-US/Products/SMART+Boards/Front+projection/V280/default.htm
image = SBV280.png
note = Removed on manufacturer request. They use libusb directly.
[SCL010.txt]
image = SCL010.png
url = http://www.scmmicro.com/products-services/smart-card-readers-terminals/contactless-dual-interface-readers/scl010.html
features = contactless
note = The contactless interface is not supported.
[SCL01x.txt]
image = SCL010.png
url = http://www.scmmicro.com/products-services/smart-card-readers-terminals/contactless-dual-interface-readers/scl010.html
features = contactless
note = The contactless interface is not supported.
1	; **************************************************************************
2	; Broken or partly supported
3	; **************************************************************************
4
5	[ACR122U_PICC.txt]
6	image = acr122.png
7	url = http://acs.com.hk/acr122.php
8	note = Time extension requests are not supported.
9	Firmwares version < 2.06 are bogus: APDU with 0x7B (123) bytes expected do not work with a 14443 card. The reader returns SW=63 00 instead.
10	features = contactless
11	[ActivCardV2.txt]
12	image = ActivCard.png
13	url = http://www.activcorp.com/en/products/4_3_2_readers.php
14	note = The reader do timeout when a special USB frame is sent from the reader. If the frame size if a multiple of wMaxPacketSize the communication is stopped.
15	Some users report that this reader is in fact a SCR-331 with a different firmware and that you can upgrade its firmware to transform it into a (supported) SCR-331 reader.
16	[Aladdin_eToken_PRO_USB_72K_Java.txt]
17	image = aladdin_pro.png
18	url = http://www.aladdin.com/etoken/devices/pro-usb.aspx
19	note = The token does not work after a warm reset. See http://www.opensc-project.org/pipermail/opensc-devel/2009-April/012128.html
20	[Athena_IDProtect_Key.txt]
21	note = PPS to set the card in T=1 fails. See http://www.opensc-project.org/pipermail/opensc-user/2010-May/004023.html
22	[BludriveII.txt]
23	image = BludriveII_CCID.png
24	url = http://shop.blutronics.com/ViewProdotti.asp?IdMarca=3&Id=751
25	note = The USB descriptor is bogus and the patch in get_ccid_usb_interface() does not work with libusb-1.0
26	[Broadcom_5880v2.txt]
27	note = Found in Dell E6400 laptop
28	The reader reports "Hardware error" to GetSlotStatus when no card is present.
29	[Feitian_SCR301.txt]
30	iManufacturer = Feitian
31	image = Feitian-Rockey301-CCID.png
32	url = http://www.ftsafe.com/products/reader301.html
33	note = The reader fails with a CASE 2 APDU with Le=0 (256 bytes)
34	Sent: 80 34 01 00 00
35	ifdhandler.c:1219:IFDHTransmitToICC() no name (lun: 0)
36	commands.c:1542:CmdXfrBlockTPDU_T0() T=0: 5 bytes
37	-> 000000 6F 05 00 00 00 00 07 00 00 00 80 34 01 00 00
38	<- 000000 80 00 00 00 00 00 07 40 FE 00
39	commands.c:1316:CCID_Receive Card absent or mute
40	And time extension requests are not forwarded back to the host.
41	[HP_kus-0133.txt]
42	note = SetParameters fails with a card of ATR 3B 16 96 41 73 74 72 69 64. The smart card reader part is from SCM.
43	[iDream.txt]
44	image = THRC2002-2.png
45	url = http://www.idream.be/consulter.php?pid=50&tab=2
46	note = also known as ID-SMID01 and maybe other commercial names
47	PPS fails with a Cryptoflex card
48	Powerup fails with a Setcos card
49	[LTC31.txt]
50	image = LTC31.png
51	url = "http://www.c3po.es/ltc31.html
52	note = The reader works fine with Linux kernel 2.4 but does not with Linux kernel 2.6. The ioctl() syscall returns EINVAL (Invalid argument). This reader is not more sold and replaced by the LTC31v2 model.
53	[mIDentity.txt]
54	image = kobil_midentity.png
55	url = http://www.kobil.com/index.php?id=49&type=7
56	note = Time requests are not managed correctly and make the firmware fails. This is not a problem unless you use a time-consuming APDU like RSA key generation.
57
58	A new firmware will correct the bug.
59	[mIDentityXL.txt]
60	image = kobil_midentity.png
61	url = http://www.kobil.com/index.php?id=49&type=7
62	note = Time requests are not managed correctly and make the firmware fails. This is not a problem unless you use a time-consuming APDU like RSA key generation.
63
64	A new firmware will correct the bug.
65	[Oberthur-CosmoCard1.txt]
66	note = the reader responds with bResponseType not defined in ICCD v1.0 specification. See http://archives.neohapsis.com/archives/dev/muscle/2009-q4/0059.html
67	[Oz776S.txt]
68	note = This reader is common as an internal reader in laptops like the Dell D420 or D820.
69	The ATR may be corrupted by a 90 00 at the end
70	The reader is bogus and does not accept PPS
71	[Oz776_7772.txt]
72	note = This reader is common as an internal reader in laptops.
73	The reader is bogus and does not accept PPS
74	[Precise_200_MC.txt]
75	image = Precise200MC.png
76	url = http://precisebiometrics.com/?id=2718&cid=2722
77	note = Must be firmware version 50.00 or above: time extension requests are not sent back to the host in earlier versions of the firmware. The reader can't talk to card with TA1=96. See http://archives.neohapsis.com/archives/dev/muscle/2010-q3/0197.html
78	[Precise_250_MC.txt]
79	image = Precise250MC.png
80	url = http://precisebiometrics.com/?id=2718&cid=2723
81	note = Must be firmware version 50.00 or above: time extension requests are not sent back to the host in earlier versions of the firmware. The reader can't talk to card with TA1=96. See http://archives.neohapsis.com/archives/dev/muscle/2010-q3/0197.html
82	[ReinerSCT.txt]
83	image = reiner-pinpad.png
84	url = http://www.reiner-sct.com/content/view/4/16/
85	note = Time requests are not managed and the driver may time out without any response from the reader. This is not a problem unless you use a time-consuming APDU like RSA key generation.
86	Reiner provides a free software driver for this reader: http://support.reiner-sct.de/
87	[Smart_SBV280.txt]
88	url = http://www2.smarttech.com/st/en-US/Products/SMART+Boards/Front+projection/V280/default.htm
89	image = SBV280.png
90	note = Removed on manufacturer request. They use libusb directly.
91	[SCL010.txt]
92	image = SCL010.png
93	url = http://www.scmmicro.com/products-services/smart-card-readers-terminals/contactless-dual-interface-readers/scl010.html
94	features = contactless
95	note = The contactless interface is not supported.
96	[SCL01x.txt]
97	image = SCL010.png
98	url = http://www.scmmicro.com/products-services/smart-card-readers-terminals/contactless-dual-interface-readers/scl010.html
99	features = contactless
100	note = The contactless interface is not supported.