List of SCardControl() commands supported by the CCID driver
============================================================

PC/SC provides the SCardControl() function to send commands to the
driver and/or reader. Here is the list of supported commands by the CCID
driver.


PC/SC function prototype
"""""""""""""""""""""""""

LONG SCardControl(
    SCARDHANDLE hCard,
    DWORD       dwControlCode,
    LPCVOID     pbSendBuffer,
    DWORD       cbSendLength,
    LPVOID      pbRecvBuffer,
    DWORD       cbRecvLength,
    LPDWORD     lpBytesReturned     
)

Parameters:

[in]     hCard            Connection made from SCardConnect().
[in]     dwControlCode    Control code for the operation.
[in]     pbSendBuffer     Command to send to the reader.
[in]     cbSendLength     Length of the command.
[out]    pbRecvBuffer     Response from the reader.
[in]     cbRecvLength     Length of the response buffer.
[out]    lpBytesReturned  Length of the response.

If the dwControlCode is not supported the application receives the error
SCARD_E_UNSUPPORTED_FEATURE or SCARD_E_NOT_TRANSACTED as a general error
code.


supported ControlCode
"""""""""""""""""""""

IOCTL_SMARTCARD_VENDOR_IFD_EXCHANGE
    defined as SCARD_CTL_CODE(1)

    The pbSendBuffer[] buffer is sent as a PC_to_RDR_Escape CCID command
    For security possible problems this command in possible in the
    following cases only:
    - the reader is a Gemalto (ex Gemplus) reader and the command is:
     . get firmware version
     . switch interface on a ProxDU
    - the ifdDriverOptions (in the Info.plist file) has the bit
      DRIVER_OPTION_CCID_EXCHANGE_AUTHORIZED set

CM_IOCTL_GET_FEATURE_REQUEST
    defined as SCARD_CTL_CODE(3400)

    Implements the PC/SC v2.02.08 Part 10 IOCTL mechanism

IOCTL_FEATURE_VERIFY_PIN_DIRECT
IOCTL_FEATURE_MODIFY_PIN_DIRECT
IOCTL_FEATURE_IFD_PIN_PROPERTIES
IOCTL_FEATURE_MCT_READERDIRECT
IOCTL_FEATURE_GET_TLV_PROPERTIES
    See PC/SC v2.02.08 Part 10