/[pcsclite]/trunk/Drivers/ccid/README

Diff of /trunk/Drivers/ccid/README

Parent Directory | Revision Log | View Patch Patch

-revision 1787 by rousseau,
Tue Jan  3 18:45:20 2006 UTC
+revision 2441 by rousseau,
Sun Feb 25 13:28:34 2007 UTC
 Line 20 
 Supported CCID readers:
  =======================
  (in alphabetical order)
+ - ActivCard USB reader 3.0
  - Advanced Card Systems ACR 38U-CCID [16]
    old versions of this reader have a bug: the reader do timeout when a
    special USB frame is sent from the reader. If the frame size if a
    multiple of wMaxPacketSize the communication is stopped.
+ - Alcor Micro AU9520 [46]
+   Firmware 1.01 is bogus. The time request sent by the card is not
+   forwarded by the reader to the host.
  - Athena ASE IIIe USB V2 [29]
+ - Athena ASE IIIe KB USB [42]
+ - C3PO LTC31 (new model, USB product id 0x0006) [8]
  - Cherry XX33 keyboard [?]
  - Cherry XX44 keyboard (SmartBoard G83-6744) [18]
- - Cherry SmartTerminal ST2XXX
+ - Cherry SmartTerminal ST2000U [35]
  - Cherry ST-1044U [27]
  - Dell keyboard SK-3106 [?]
  - Dell smart card reader keyboard [?]
  - Eutron SIM Pocket Combo [25]
  - Eutron CryptoIdentity [26]
  - Gemplus GemPC 433 SL [2]
+ - Gemplus GemPC Card [41]
  - Gemplus GemPC Key [3]
+ - Gemplus GemPC PinPad
  - Gemplus GemPC Twin [4]
+ - Gemplus GemCore POS Pro
+ - Gemplus GemCore SIM Pro
  - Kobil KAAN Base [19]
  - Kobil KAAN Advanced [20]
  - Kobil KAAN SIM III [21]
- - Kobil mIDentity [22]
  - OmniKey CardMan 3121 [5]
+ - RSA SecureID SID800 [50]
  - SCM Micro SCR 331 [6]
    You shall upgrade the firmware [17] using version 5.18 or later.
  - SCM Micro SCR 331-DI [11]
-Line 49 
 Supported CCID readers:
+Line 59 
 Supported CCID readers:
    The firmware of this reader can't be upgraded so be sure to buy a
    recent model with firmware 5.14 or later
  - SCM Micro SCR 355
- - SCM Micro SCR 3310
+ - SCM Micro SCR 3310 [30]
+ - SCM Micro SCR 3311 [31]
  - SCM Micro SPR 532 [9]
    You shall contact Torsten Maykranz <tmaykranz@scmmicro.de> to get a
    firmware upgrade.
+ - SmartEpad (v 2.0) [32]
+   The firmware gives a very strange description of the reader (like a
+   dwDefaultClock: 1024.000 MHz). So do not expect a perfect behavior.
  - Verisign Secure Storage Token [24]
  - Verisign Secure Token [?]
+ - Xiring Teo [52]
  Should work but untested by me:
-Line 64 
 I would like to get these readers to per
+Line 79 
 I would like to get these readers to per
  move them in the supported list above. If you are one of the
  manufacturers, please, contact me.
- - ActivCard USB reader 2.0 [10]
+ - Axalto Reflex USB v3 [38]
  - C3PO LTC32 [13]
+ - C3PO TLTC2USB
+ - C3PO KBR36
+ - Gemplus GemPC Express
+ - HP USB Smart Card Keyboard [44]
+ - HP USB Smartcard Reader
+ - id3 Semiconductors CL1356D [45] (tested by me but I don't have the
+   reader anymore)
+ - id3 Semiconductors CL1356T [48] (it should be the same firmware as the
+   CL1356D)
+ - OmniKey CardMan 1021
+ - OmniKey CardMan 3021 [49]
+ - OmniKey CardMan 3621 [43]
+ - OmniKey CardMan 3821 [37]
+ - OmniKey CardMan 5121 [33]
+ - OmniKey CardMan 5125 [51]
+ - OmniKey CardMan 6121 [36]
+ - O2Micro Oz7762
  - SCM Micro SCR 331-DI NTTCom [23]
  - SCM Micro SCR 3310-NTTCOM [28]
+ - SCM Micro SCR 3320 [32]
  - SCM Micro SCR 333 [15]
+ - SCM Micro SDI 010 [39]
+ - SCM SCR 3340 ExpressCard54 [34]
  - Silitek SK-3105 keyboard [12] or C3PO TLTC2USB [14]
+ - Winbond Electronics (for OEM only) [40]
  Unsupported or partly supported CCID readers:
  =============================================
- - C3PO LTC31 [8]
+ - ActivCard USB reader 2.0 [10]
+     The reader do timeout when a special USB frame is sent from the
+     reader. If the frame size if a multiple of wMaxPacketSize the
+     communication is stopped.
+ - C3PO LTC31 (old model, USB product id 0x0003) [8]
      The reader works fine with Linux kernel 2.4 but does not with Linux
      kernel 2.6. The ioctl() syscall returns EINVAL (Invalid argument)
- - RSA SecureID SID800 [24]
+ - iDream (THRC2002-2) [47]
-     The USB layer is completely broken. The reader is sometimes not even
+     PPS fails with a Cryptoflex card
-     seen on the USB bus (same problem under Windows). Maybe newer
+     powerup fails with a Setcos card
-     devices will work?
+     does work with the belgium eID (the reader is sold for this
+     application)
+ - Kobil mIDentity [22]
+     Time requests are not managed correctly and make the firmware fails.
+     This is not a problem unless you use a time-consuming APDU like RSA
+     key generation.
+     A new firmware will correct the bug.
  Supported operating systems:
-Line 96 
 Debug informations:
+Line 142 
 Debug informations:
  ===================
  The driver uses the debug function provided by pcscd. So if pcscd sends
- its debug to stdout (pcscd --foreground) then the CCID will also send
+ its debug to stderr (pcscd --foreground) then the CCID will also send
- its debug to stdout. If pcscd sends its debug to syslog (by default)
+ its debug to stderr. If pcscd sends its debug to syslog (by default)
  then the CCID will also send its debug to syslog.
- You can change the debug level using the Info.plist configuraion file.
+ You can change the debug level using the Info.plist configuration file.
  The Info.plist is installed, by default, in
  /usr/local/pcsc/drivers/ifd-ccid.bundle/Contents/Info.plist
-Line 108 
 The debug level is set in the ifdLogLeve
+Line 154 
 The debug level is set in the ifdLogLeve
  combinaison of 4 different levels.
  - 1: critical: important error messages
  - 2: info:     informative messages like what reader was detected
- - 4: periodic: periodic info when pcscd test if a card is present (every
+ - 4: comm:     a dump of all the bytes exchanged between the host and the
-/10 of a second)
- - 8: comm:     a dump of all the bytes exchanged between the host and the
                 reader
+ - 8: periodic: periodic info when pcscd test if a card is present (every
+/10 of a second)
  By default the debug level is set to 3 (1 + 2) and correspond to the
  critical and info levels.
-Line 155 
 Inc., 59 Temple Place, Suite 330, Boston
+Line 201 
 Inc., 59 Temple Place, Suite 330, Boston
  History:
  ========
+.2.1 - 27 January 2007, Ludovic Rousseau
+     - pcscd_ccid.rules: add non CCID generic (InterfaceClass: 0xFF)
+       readers
+     - INSTALL: document how to use --enable-udev on FreeBSD
+     - move the O2Micro Oz7762 from the unsupported to the supported list
+       since patches to support it are applied by default
+       (O2MICRO_OZ776_PATCH)
+.2.0 - 19 January 2007, Ludovic Rousseau
+     - add support for SCARD_ATTR_VENDOR_IFD_VERSION,
+       SCARD_ATTR_VENDOR_NAME and SCARD_ATTR_MAXINPUT tags used by
+       SCardGetAttrib(). Read SCARDGETATTRIB.txt for more documentation
+     - add support for OmniKey CardMan 5125, CardMan 1021, C3PO LTC32,
+       Teo by Xiring, HP USB Smartcard Reader
+     - use --enable-twinserial to build the serial reader driver
+     - use --enable-udev to configure for a use with Linux udev hotplug
+       mechanism. This will allow pcscd to avoid polling the USB bus
+       every 1 second
+     - some minor bugs removed
+.1.0 - 11 August 2006, Ludovic Rousseau
+     - support Extended APDU (up to 64KB) for readers in TPDU mode (many
+       readers) or Extended APDU mode (very rare). This only works for
+       T=1 cards.
+     - add support for C3PO LTC31 (new version), OmniKey CardMan 3021, HP
+       USB Smart Card Keyboard, Actividentity (ActiveCard) Activkey Sim,
+       id3 Semiconductors CL1356D and CL1356T, Alcor Micro AU9520
+     - support the contactless interface of the SCR331-DI-NTTCOM
+     - add support of FreeBSD
+     - increase the USB timeout used for PIN verify/modify to not timeout
+       before the reader
+     - the 4-bytes value returned by CM_IOCTL_GET_FEATURE_REQUEST shall
+       be encoded in big endian as documented in PCSC v2 part 10 ch 2.2
+       page 2. The applications using this feature shall be updated (to
+       respect the PCSC specification).
+     - use ./configure --enable-twinserial to compile and install the the
+       driver for the GemPC Twin serial
+     - some minor bugs removed
+.0.1 - 22 April 2006, Ludovic Rousseau
+     - add support for Axalto Reflex USB v3, SCM Micro SDI 010, Winbond
+       Electronics W81E381 chipset, Gemplus GemPC Card, Athena ASE IIIe
+       KB USB, OmniKey CardMan 3621
+     - support Solaris (Solaris uses a different libusb)
+     - better documentation for ./configure arguments
+     - improve support of Cherry XX44 keyboard for PIN verify and change
+       (circumvent firmware bugs)
+     - do not use LTPBundleFindValueWithKey() from pcscd since this
+       function has been removed from pcscd API
+     - use -fvisibility=hidden is available to limit the number of
+       exported symbols
+.0.0 - 3 March 2006, Ludovic Rousseau
+     - add support for ActivCard USB Reader 3.0, Athena ASE IIIe USB V2,
+       SCM Micro SCR 355, SCR 3311, SCR 3320, SCR 3340 ExpressCard54,
+       Gemplus GemCore SIM Pro, GemCore POS Pro (serial and USB), GemPC
+       Express (ExpressCard/54 interface), SmartEpad (v 2.0), OmniKey
+       CardMan 5121
+     - greatly improve support of PIN PAD readers. We now support TPDU
+       readers with T=1 cards
+     - use l10n strings for the Gemplus GemPC PIN PAD (it has a screen).
+       Supported languages are: de, en, es, fr, it
+     - rename ACS ACR 38 in ACR 38U-CCID since the ACR 38 is a different
+       reader and is not CCID compatible
+     - allow to select the Power On voltage using Info.plist instead of
+       recompiling the source code
+     - correct bugs in the support of multi-slots readers
+     - if the card is faster than the reader (TA1=97 for example) we try
+       to use a not-so-bad speed (corresponding to TA1=96, 95 or 94)
+       instead of the default speed of TA1=11
+     - the src/parse tool do not use the driver anymore. No need to
+       update the Info.plist file first.
+     - some minor bugs removed
 .9.4 - 27 November 2005, Ludovic Rousseau
      - add support for Eutron SIM Pocket Combo, Eutron CryptoIdentity,
        Verisign Secure Token and VeriSign Secure Storage Token, GemPC
-Line 205 
 History:
+Line 330 
 History:
      - T=1 TPDU code:
        . the work on T=1 TPDU code was possible thanks to Gemplus
          validation team who helped me test, debug and bring the code to
-         an EMV validation level. Thanks to J�r�me, Jean-Yves, Xavier and
+         an EMV validation level. Thanks to Jérôme, Jean-Yves, Xavier and
          the Gemplus readers department
        . error code was not checked correctly
        . avoid a (nearly) infinite loop when resynch are needed.
-Line 315 
 History:
+Line 440 
 History:
      - move LTC31 reader from unsupported to supported reader list. It
        was my f ault since in used odd INS byte in my test applet and odd
        INS bytes are forbidden by ISO 7816-4 ch. 5.4.2 Instruction byte.
-       Thanks to Josep Mon� s Teixidor for pointing the problem.
+       Thanks to Josep Moné s Teixidor for pointing the problem.
      - src/commands.c: comment out the automatic GET RESPONSE part. I
        don't think it should be in the driver. Maybe in pcscd instead?
-Line 326 
 History:
+Line 451 
 History:
      - add --enable-libusb=PATH option is your libusb is not installed in
        /usr or /usr/local
      - honor DESTDIR in install rules (closes [ #300110 ]). Thanks to
-       Ville Skytt� for the patch.
+       Ville Skyttä for the patch.
      - src/ccid.c: do not switch the GemPC Key and GemPC Twin in APDU
        mode since it also swicth in EMV mode and may not work with non
        EMV cards
-Line 356 
 History:
+Line 481 
 History:
      - First public release
- Bibliography:
+ References:
- =============
+ ===========
  [1] http://www.usb.org/developers/devclass_docs/ccid_classspec_1_00a.pdf
  [2] http://www.gemplus.com/products/gempc433/
  [3] http://www.gemplus.com/products/gempckey/
  [4] http://www.gemplus.com/products/gempctwin/
- [5] http://www.omnikey.com/en/produkt_details.php3?produkt=1&variante=47
+ [5] http://www.omnikey.com/?id=products&tx_okprod_pi1[product]=21
  [6] http://www.scmmicro.com/security/SCR331.html
  [7] http://www.scmmicro.com/security/SCR335.html
  [8] http://www.c3po.es/ltc31.html
-Line 388 
 Bibliography:
+Line 513 
 Bibliography:
  [27] http://www.cherry.de/english/advanced-line/advanced_smartterminal_st-1044u.htm
  [28] http://www.ntt.com/jpki/scr3310.html
  [29] http://www.asedrive.com/product.asp?pid=1
+ [30] http://www.scmmicro.com/security/SCR3310.html
+ [31] http://scmmicro.com/security/SCR3311.html
+ [31] http://scmmicro.com/security/SCR3320.html
+ [32] http://www.smartepad.com.br/
+ [33] http://www.omnikey.com/?id=products&tx_okprod_pi1[product]=37
+ [34] http://www.scmmicro.com/security/SCR3340.html
+ [35] http://www.cherry.de/deutsch/advanced-line/advanced_smart_terminal_st-2000u.htm
+ [36] http://www.omnikey.com/index.php?id=products&tx_okprod_pi1[product]=29
+ [37] http://www.omnikey.com/index.php?id=products&tx_okprod_pi1[product]=33
+ [38] http://www.reflexreaders.com/Products/reflex_usbnew.html
+ [39] http://www.scmmicro.com/security/SDI_010.html
+ [40] http://www.winbond.com.tw/E-WINBONDHTM/partner/b_2_e_4.htm
+ [41] http://www.gemplus.com/products/gempc_card/
+ [42] http://www.asedrive.com/product.asp?pid=2
+ [43] http://www.omnikey.com/?id=products&tx_okprod_pi1[product]=31
+ [44] http://h18000.www1.hp.com/products/quickspecs/12346_na/12346_na.HTML
+ [45] http://www.id3semiconductors.com/produits/cl1356D.htm
+ [46] http://www.alcormicro.com/products_detail.php?main_id=8&p_id=21
+ [47] http://www.tai-hao.com/english/products_detail.php?main_id=4&second_id=13&p_id=53&now_rows=1
+ [48] http://www.id3semiconductors.com/produits/cl1356T.htm
+ [49] http://www.omnikey.com/index.php?id=products&tx_okprod_pi1[product]=48
+ [50] http://www.rsasecurity.com/products/securid/datasheets/SID800_DS_0205.pdf
+ [51] http://www.omnikey.com/?id=products&tx_okprod_pi1[product]=39
+ [52] http://www.teobyxiring.com/
  $Id$

 Legend:



Removed from v.1787
 


changed lines


 
Added in v.2441
 Legend:



Removed from v.1787
 


changed lines


 
Added in v.2441
-Removed from v.1787
+Added in v.2441

	ViewVC Help
Powered by ViewVC 1.1.5