/[pcsclite]/trunk/Drivers/ccid/README
ViewVC logotype

Diff of /trunk/Drivers/ccid/README

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 1326 by rousseau, Sun Feb 20 14:07:40 2005 UTC revision 2819 by rousseau, Thu Feb 14 11:01:31 2008 UTC
# Line 20  Supported CCID readers: Line 20  Supported CCID readers:
20  =======================  =======================
21    
22  (in alphabetical order)  (in alphabetical order)
23  - Advanced Card Systems ACR 38 [16]  - ActivCard USB reader 3.0
24    - Advanced Card Systems ACR 38U-CCID [16]
25    old versions of this reader have a bug: the reader do timeout when a    old versions of this reader have a bug: the reader do timeout when a
26    special USB frame is sent from the reader. If the frame size if a    special USB frame is sent from the reader. If the frame size if a
27    multiple of wMaxPacketSize the communication is stopped.    multiple of wMaxPacketSize the communication is stopped.
28    - Alcor Micro AU9520 [46]
29      Firmware 1.01 is bogus. The time request sent by the card is not
30      forwarded by the reader to the host.
31    - Athena ASE IIIe USB V2 [29]
32    - Athena ASE IIIe KB USB [42]
33    - Blutronics Bludrive II CCID
34    - C3PO LTC31 (new model, USB product id 0x0006) [8]
35  - Cherry XX33 keyboard [?]  - Cherry XX33 keyboard [?]
36    - Cherry XX44 keyboard (SmartBoard G83-6744) [18]
37    - Cherry SmartTerminal ST2000U [35]
38    - Cherry ST-1044U [27]
39  - Dell keyboard SK-3106 [?]  - Dell keyboard SK-3106 [?]
40  - Dell smart card reader keyboard [?]  - Dell smart card reader keyboard [?]
41    - Eutron Digipass 860 [59]
42    - Eutron SIM Pocket Combo [25]
43    - Eutron CryptoIdentity [26]
44    - Eutron Smart Pocket [58]
45  - Gemplus GemPC 433 SL [2]  - Gemplus GemPC 433 SL [2]
46    - Gemplus GemPC Card [41]
47  - Gemplus GemPC Key [3]  - Gemplus GemPC Key [3]
48    - Gemplus GemPC PinPad
49  - Gemplus GemPC Twin [4]  - Gemplus GemPC Twin [4]
50    - Gemplus GemCore POS Pro
51    - Gemplus GemCore SIM Pro
52  - Kobil KAAN Base [19]  - Kobil KAAN Base [19]
53  - Kobil KAAN Advanced [20]  - Kobil KAAN Advanced [20]
54    - Kobil KAAN SIM III [21]
55  - OmniKey CardMan 3121 [5]  - OmniKey CardMan 3121 [5]
56    - RSA SecureID SID800 [50]
57  - SCM Micro SCR 331 [6]  - SCM Micro SCR 331 [6]
58    You shall upgrade the firmware [17] using version 5.18 or later.    You shall upgrade the firmware [17] using version 5.18 or later.
59  - SCM Micro SCR 331-DI [11]  - SCM Micro SCR 331-DI [11]
# Line 40  Supported CCID readers: Line 61  Supported CCID readers:
61  - SCM Micro SCR 335 [7]  - SCM Micro SCR 335 [7]
62    The firmware of this reader can't be upgraded so be sure to buy a    The firmware of this reader can't be upgraded so be sure to buy a
63    recent model with firmware 5.14 or later    recent model with firmware 5.14 or later
64    - SCM Micro SCR 355
65    - SCM Micro SCR 3310 [30]
66    - SCM Micro SCR 3311 [31]
67  - SCM Micro SPR 532 [9]  - SCM Micro SPR 532 [9]
68    You shall contact Torsten Maykranz <tmaykranz@scmmicro.de> to get a    You shall contact Torsten Maykranz <tmaykranz@scmmicro.de> to get a
69    firmware upgrade.    firmware upgrade.
70    - SmartEpad (v 2.0) [32]
71      The firmware gives a very strange description of the reader (like a
72      dwDefaultClock: 1024.000 MHz). So do not expect a perfect behavior.
73    - Verisign Secure Storage Token [24]
74    - Verisign Secure Token [?]
75    - Xiring Teo [52]
76    
77    
78  Should work but untested by me:  Should work but untested by me:
# Line 52  I would like to get these readers to per Line 82  I would like to get these readers to per
82  move them in the supported list above. If you are one of the  move them in the supported list above. If you are one of the
83  manufacturers, please, contact me.  manufacturers, please, contact me.
84    
85  - Cherry XX44 keyboard (SmartBoard G83-6744) [18]  - Axalto Reflex USB v3 [38]
 - ActivCard USB reader 2.0 [10]  
86  - C3PO LTC32 [13]  - C3PO LTC32 [13]
87    - C3PO TLTC2USB
88    - C3PO KBR36
89    - Charismathics token
90    - Gemplus GemPC Express
91    - Gemplus Gem e-Seal Pro
92    - Fujitsu Siemens Computers SmartCard USB 2A [53]
93    - Fujitsu Siemens Computers SmartCard Keyboard USB 2A [54]
94    - Giesecke & Devrient StarSign Card Token 350 (ICCD) [57]
95    - Giesecke & Devrient StarSign Card Token 550 (ICCD)
96    - HP USB Smart Card Keyboard [44]
97    - HP USB Smartcard Reader
98    - id3 Semiconductors CL1356D [45] (tested by me but I don't have the
99      reader anymore)
100    - id3 Semiconductors CL1356T [48] (it should be the same firmware as the
101      CL1356D)
102    - Kobil EMV CAP - SecOVID Reader III
103    - Lenovo Integrated Smart Card Reader
104    - Lexar/Gemalto Smart Enterprise Guardian [60]
105    - OmniKey CardMan 1021
106    - OmniKey CardMan 3021 [49]
107    - OmniKey CardMan 3621 [43]
108    - OmniKey CardMan 3821 [37]
109    - OmniKey CardMan 4321 [55]
110    - OmniKey CardMan 5121 [33]
111    - OmniKey CardMan 5125 [51]
112    - OmniKey CardMan 5321 [56]
113    - OmniKey CardMan 6121 [36]
114    - O2Micro Oz776 (0x7762 and 0x7772 versions)
115    - Philips JCOP41V221
116    - SafeNet IKey4000
117    - SCM Micro SCR 331-DI NTTCom [23]
118    - SCM Micro SCR 3310-NTTCOM [28]
119    - SCM Micro SCR 3320 [32]
120  - SCM Micro SCR 333 [15]  - SCM Micro SCR 333 [15]
121    - SCM Micro SDI 010 [39]
122    - SCM SCR 3340 ExpressCard54 [34]
123    - SchlumbergerSema Cyberflex Access e-gate ICCD
124  - Silitek SK-3105 keyboard [12] or C3PO TLTC2USB [14]  - Silitek SK-3105 keyboard [12] or C3PO TLTC2USB [14]
125    - Sitecom USB simcard reader MD-010
126    - Winbond Electronics (for OEM only) [40]
127    
128    
129  Unsupported or partly supported CCID readers:  Unsupported or partly supported CCID readers:
130  =============================================  =============================================
131    
132  - C3PO LTC31 [8]  - ActivCard USB reader 2.0 [10]
133        The reader do timeout when a special USB frame is sent from the
134        reader. If the frame size if a multiple of wMaxPacketSize the
135        communication is stopped.
136    - C3PO LTC31 (old model, USB product id 0x0003) [8]
137      The reader works fine with Linux kernel 2.4 but does not with Linux      The reader works fine with Linux kernel 2.4 but does not with Linux
138      kernel 2.6. The ioctl() syscall returns EINVAL (Invalid argument)      kernel 2.6. The ioctl() syscall returns EINVAL (Invalid argument)
139    - iDream (THRC2002-2) [47]
140        PPS fails with a Cryptoflex card
141        powerup fails with a Setcos card
142        does work with the belgium eID (the reader is sold for this
143        application)
144    - Kobil mIDentity [22]
145        Time requests are not managed correctly and make the firmware fails.
146        This is not a problem unless you use a time-consuming APDU like RSA
147        key generation.
148        A new firmware will correct the bug.
149    - Reiner-SCT cyberJack pinpad(a)
150        Time requests are not managed and the driver may time out without
151        any response from the reader.  This is not a problem unless you use
152        a time-consuming APDU like RSA key generation.
153    
154    
155  Supported operating systems:  Supported operating systems:
# Line 79  Debug informations: Line 164  Debug informations:
164  ===================  ===================
165    
166  The driver uses the debug function provided by pcscd. So if pcscd sends  The driver uses the debug function provided by pcscd. So if pcscd sends
167  its debug to stdout (pcscd --foreground) then the CCID will also send  its debug to stderr (pcscd --foreground) then the CCID will also send
168  its debug to stdout. If pcscd sends its debug to syslog (by default)  its debug to stderr. If pcscd sends its debug to syslog (by default)
169  then the CCID will also send its debug to syslog.  then the CCID will also send its debug to syslog.
170    
171  You can change the debug level using the Info.plist configuraion file.  You can change the debug level using the Info.plist configuration file.
172  The Info.plist is installed, by default, in  The Info.plist is installed, by default, in
173  /usr/local/pcsc/drivers/ifd-ccid.bundle/Contents/Info.plist  /usr/local/pcsc/drivers/ifd-ccid.bundle/Contents/Info.plist
174    
# Line 91  The debug level is set in the ifdLogLeve Line 176  The debug level is set in the ifdLogLeve
176  combinaison of 4 different levels.  combinaison of 4 different levels.
177  - 1: critical: important error messages  - 1: critical: important error messages
178  - 2: info:     informative messages like what reader was detected  - 2: info:     informative messages like what reader was detected
179  - 4: periodic: periodic info when pcscd test if a card is present (every  - 4: comm:     a dump of all the bytes exchanged between the host and the
                1/10 of a second)  
 - 8: comm:     a dump of all the bytes exchanged between the host and the  
180                 reader                 reader
181    - 8: periodic: periodic info when pcscd test if a card is present (every
182                   1/10 of a second)
183    
184  By default the debug level is set to 3 (1 + 2) and correspond to the  By default the debug level is set to 3 (1 + 2) and correspond to the
185  critical and info levels.  critical and info levels.
# Line 120  MacOSX libusb Line 205  MacOSX libusb
205  Licence:  Licence:
206  ========  ========
207    
208    This program is free software; you can redistribute it and/or modify    This library is free software; you can redistribute it and/or modify it
209  it under the terms of the GNU General Public License as published by the  under the terms of the GNU Lesser General Public License as published by
210  Free Software Foundation; either version 2 of the License, or (at your  the Free Software Foundation; either version 2.1 of the License, or (at
211  option) any later version.  your option) any later version.
212    
213    This program is distributed in the hope that it will be useful, but    This library is distributed in the hope that it will be useful, but
214  WITHOUT ANY WARRANTY; without even the implied warranty of  WITHOUT ANY WARRANTY; without even the implied warranty of
215  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser
216  General Public License for more details.  General Public License for more details.
217    
218    You should have received a copy of the GNU General Public License    You should have received a copy of the GNU Lesser General Public License
219  along with this program; if not, write to the Free Software Foundation,  along with this library; if not, write to the Free Software Foundation,
220  Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA  Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307  USA
221    
222    
223  History:  History:
224  ========  ========
225    
226    1.3.4 - 8 February 2008, Ludovic Rousseau
227        - the serial driver could not be loaded because of the missing
228          symbol InterruptRead
229        - remove WAIT_FOR_SYSFS="bInterfaceProtocol" to do not delay udev
230    
231    
232    1.3.3 - 6 February 2008, Ludovic Rousseau
233        - add support for Lexar Smart Enterprise Guardian and Blutronics
234          Bludrive II CCID
235        - add support of TAG_IFD_POLLING_THREAD using IFDHPolling() to
236          detect asynchronous card movements. With this feature pcscd will
237          not poll the reader every 0.4 second for a card movement but will
238          wait until the reader sends a USB interrupt signal
239        - correct a bug with an ICCD-B device and a receive buffer smaller
240          than 4 bytes
241        - remove the sleep in the udev rule. It slows down the detection of
242          any USB device
243        - some minor bugs removed
244    
245    
246    1.3.2 - 22 January 2008, Ludovic Rousseau
247        - add support of Apple Mac OS X Leopard (10.5.1)
248        - solve a hotplug problem on Ubuntu 7.10 (reader was not detected)
249        - create a symlink from libccidtwin.so to libccidtwin.so.VERSION so
250          that the /etc/reader.conf configuration file do not need to edited
251          for each new driver version
252        - make driver for the GemPC Serial compile again
253        - some minor bugs removed
254    
255    
256    1.3.1 - 16 November 2007, Ludovic Rousseau
257        - add support for "Philips Semiconductors JCOP41V221" ICCD card,
258          O2Micro oz776 (ProductID 0x7772), CardMan5321, Giesecke & Devrient
259          StarSign Card Token 350 and 550, SafeNet IKey4000, Eutron
260          CryptoIdentity, Eutron Smart Pocket, Eutron Digipass 860, Lenovo
261          Integrated Smart Card Reader, "Kobil EMV CAP - SecOVID Reader III,
262          Charismathics token, Reiner-SCT cyberJack pinpad(a)
263        - improve support of Mac OS X and *BSD
264        - some minor bugs removed
265    
266    
267    1.3.0 - 10 May 2007, Ludovic Rousseau
268        - add support of ICCD version A and B
269        - add support for (new) KOBIL mIDentity, SchlumbergerSema Cyberflex
270          Access e-gate ICCD, Fujitsu Siemens Computers SmartCard USB 2A and
271          SmartCard Keyboard USB 2A readers, OmniKey CardMan 4321
272        - contrib/RSA_SecurID/RSA_SecurID_getpasswd: tool to get the on time
273          password also displayed on the token screen
274        - contrib/Kobil_mIDentity_switch: tool to activate the CCID reader
275          of the Kobil mIDentity. The tool should be started automatically
276          by the udev rule on Linux
277        - GemPC pinpad: localisation of the string "PIN blocked", add
278          Portuguese(pt), Dutch(nl) and Turkish(tr) localisations
279        - some minor bugs removed
280    
281    1.2.1 - 27 January 2007, Ludovic Rousseau
282        - pcscd_ccid.rules: add non CCID generic (InterfaceClass: 0xFF)
283          readers
284        - INSTALL: document how to use --enable-udev on FreeBSD
285        - move the O2Micro Oz7762 from the unsupported to the supported list
286          since patches to support it are applied by default
287          (O2MICRO_OZ776_PATCH)
288    
289    
290    1.2.0 - 19 January 2007, Ludovic Rousseau
291        - add support for SCARD_ATTR_VENDOR_IFD_VERSION,
292          SCARD_ATTR_VENDOR_NAME and SCARD_ATTR_MAXINPUT tags used by
293          SCardGetAttrib(). Read SCARDGETATTRIB.txt for more documentation
294        - add support for OmniKey CardMan 5125, CardMan 1021, C3PO LTC32,
295          Teo by Xiring, HP USB Smartcard Reader
296        - use --enable-twinserial to build the serial reader driver
297        - use --enable-udev to configure for a use with Linux udev hotplug
298          mechanism. This will allow pcscd to avoid polling the USB bus
299          every 1 second
300        - some minor bugs removed
301    
302    
303    1.1.0 - 11 August 2006, Ludovic Rousseau
304        - support Extended APDU (up to 64KB) for readers in TPDU mode (many
305          readers) or Extended APDU mode (very rare). This only works for
306          T=1 cards.
307        - add support for C3PO LTC31 (new version), OmniKey CardMan 3021, HP
308          USB Smart Card Keyboard, Actividentity (ActiveCard) Activkey Sim,
309          id3 Semiconductors CL1356D and CL1356T, Alcor Micro AU9520
310        - support the contactless interface of the SCR331-DI-NTTCOM
311        - add support of FreeBSD
312        - increase the USB timeout used for PIN verify/modify to not timeout
313          before the reader
314        - the 4-bytes value returned by CM_IOCTL_GET_FEATURE_REQUEST shall
315          be encoded in big endian as documented in PCSC v2 part 10 ch 2.2
316          page 2. The applications using this feature shall be updated (to
317          respect the PCSC specification).
318        - use ./configure --enable-twinserial to compile and install the the
319          driver for the GemPC Twin serial
320        - some minor bugs removed
321    
322    
323    1.0.1 - 22 April 2006, Ludovic Rousseau
324        - add support for Axalto Reflex USB v3, SCM Micro SDI 010, Winbond
325          Electronics W81E381 chipset, Gemplus GemPC Card, Athena ASE IIIe
326          KB USB, OmniKey CardMan 3621
327        - support Solaris (Solaris uses a different libusb)
328        - better documentation for ./configure arguments
329        - improve support of Cherry XX44 keyboard for PIN verify and change
330          (circumvent firmware bugs)
331        - do not use LTPBundleFindValueWithKey() from pcscd since this
332          function has been removed from pcscd API
333        - use -fvisibility=hidden is available to limit the number of
334          exported symbols
335    
336    
337    1.0.0 - 3 March 2006, Ludovic Rousseau
338        - add support for ActivCard USB Reader 3.0, Athena ASE IIIe USB V2,
339          SCM Micro SCR 355, SCR 3311, SCR 3320, SCR 3340 ExpressCard54,
340          Gemplus GemCore SIM Pro, GemCore POS Pro (serial and USB), GemPC
341          Express (ExpressCard/54 interface), SmartEpad (v 2.0), OmniKey
342          CardMan 5121
343        - greatly improve support of PIN PAD readers. We now support TPDU
344          readers with T=1 cards
345        - use l10n strings for the Gemplus GemPC PIN PAD (it has a screen).
346          Supported languages are: de, en, es, fr, it
347        - rename ACS ACR 38 in ACR 38U-CCID since the ACR 38 is a different
348          reader and is not CCID compatible
349        - allow to select the Power On voltage using Info.plist instead of
350          recompiling the source code
351        - correct bugs in the support of multi-slots readers
352        - if the card is faster than the reader (TA1=97 for example) we try
353          to use a not-so-bad speed (corresponding to TA1=96, 95 or 94)
354          instead of the default speed of TA1=11
355        - the src/parse tool do not use the driver anymore. No need to
356          update the Info.plist file first.
357        - some minor bugs removed
358    
359    
360    0.9.4 - 27 November 2005, Ludovic Rousseau
361        - add support for Eutron SIM Pocket Combo, Eutron CryptoIdentity,
362          Verisign Secure Token and VeriSign Secure Storage Token, GemPC
363          Card (PCMCIA), SCM SCR331-DI NTTCom, SCM Micro SCR 3310-NTTCom,
364          Cherry ST-1044U, Cherry SmartTerminal ST-2XXX
365        - add support of PC/SC v2 part 10 CM_IOCTL_GET_FEATURE_REQUEST add
366          support of FEATURE_VERIFY_PIN_DIRECT and FEATURE_MODIFY_PIN_DIRECT
367          remove support of IOCTL_SMARTCARD_VENDOR_VERIFY_PIN (now
368          obsoleted). A sample code is available in examples/scardcontrol.c
369        - we need pcsc-lite 1.2.9-beta9 since some structures used for PIN
370          pad readers are defined by pcsc-lite
371        - some (bogus) cards require an extra EGT but the ATR does not say
372          so. We try to detect the bogus cards and set TC1=2
373        - IFDHSetProtocolParameters(): only use a data rate supported by the
374          reader in the PPS negociation, otherwise we stay at the default
375          speed.
376        - calculate and store the read timeout according to the card ATR
377          instead of using a fixed value of 60 seconds
378        - increase the read timeout if the card sends and WTX request
379        - improve support of GemPC Twin and GemPC Card (serial protocol)
380        - reset the device on close only if DRIVER_OPTION_RESET_ON_CLOSE is
381          set. The problem was that a device reset also disconnects the
382          keyboard on a keyboard + reader device.
383        - use color logs
384        - some minor bugs removed
385    
386    
387    0.9.3 - 14 March 2005, Ludovic Rousseau
388        - change the licence from GNU GPL to GNU Lesser GPL (LGPL)
389        - add support for ACS ACR 38, Kobil KAAN Base, Kobil KAAN Advanced,
390          Kobil KAAN SIM III, Kobil KAAN mIDentity, SCM Micro SCR 331,
391          SCM Micro SCR 331-DI, SCM Micro SCR 335, SCM Micro SCR 3310,
392          SCM Micro SCR 532, Cherry XX44 readers
393        - improve communication speed with readers featuring "Automatic PPS
394          made by the CCID"
395        - switch the Cherry xx33 reader in ISO mode if power up in EMV mode
396          fails.
397        - add support of character level readers. Thanks to O2Micro for the
398          patch
399        - add support for the O2Micro OZ776S reader but the reader firmware
400          is still bogus
401        - check firmware version to avoid firmwares with bugs. You can still
402          use a bogus firmware by setting DRIVER_OPTION_USE_BOGUS_FIRMWARE
403          in Info.plist
404        - some minor bugs removed
405    
406  0.9.2 - 15 August 2004, Ludovic Rousseau  0.9.2 - 15 August 2004, Ludovic Rousseau
407      - T=1 TPDU code:      - T=1 TPDU code:
408        . the work on T=1 TPDU code was possible thanks to Gemplus        . the work on T=1 TPDU code was possible thanks to Gemplus
409          validation team who helped me test, debug and bring the code to          validation team who helped me test, debug and bring the code to
410          an EMV validation level. Thanks to Jérôme, Jean-Yves, Xavier and          an EMV validation level. Thanks to Jérôme, Jean-Yves, Xavier and
411          the Gemplus readers department          the Gemplus readers department
412        . error code was not checked correctly        . error code was not checked correctly
413        . avoid a (nearly) infinite loop when resynch are needed.        . avoid a (nearly) infinite loop when resynch are needed.
# Line 252  History: Line 517  History:
517      - move LTC31 reader from unsupported to supported reader list. It      - move LTC31 reader from unsupported to supported reader list. It
518        was my f ault since in used odd INS byte in my test applet and odd        was my f ault since in used odd INS byte in my test applet and odd
519        INS bytes are forbidden by ISO 7816-4 ch. 5.4.2 Instruction byte.        INS bytes are forbidden by ISO 7816-4 ch. 5.4.2 Instruction byte.
520        Thanks to Josep Moné s Teixidor for pointing the problem.        Thanks to Josep Moné s Teixidor for pointing the problem.
521      - src/commands.c: comment out the automatic GET RESPONSE part. I      - src/commands.c: comment out the automatic GET RESPONSE part. I
522        don't think it should be in the driver. Maybe in pcscd instead?        don't think it should be in the driver. Maybe in pcscd instead?
523    
# Line 263  History: Line 528  History:
528      - add --enable-libusb=PATH option is your libusb is not installed in      - add --enable-libusb=PATH option is your libusb is not installed in
529        /usr or /usr/local        /usr or /usr/local
530      - honor DESTDIR in install rules (closes [ #300110 ]). Thanks to      - honor DESTDIR in install rules (closes [ #300110 ]). Thanks to
531        Ville Skyttä for the patch.        Ville Skyttä for the patch.
532      - src/ccid.c: do not switch the GemPC Key and GemPC Twin in APDU      - src/ccid.c: do not switch the GemPC Key and GemPC Twin in APDU
533        mode since it also swicth in EMV mode and may not work with non        mode since it also swicth in EMV mode and may not work with non
534        EMV cards        EMV cards
# Line 293  History: Line 558  History:
558      - First public release      - First public release
559    
560    
561  Bibliography:  References:
562  =============  ===========
563    
564  [1] http://www.usb.org/developers/devclass_docs/ccid_classspec_1_00a.pdf  [1] http://www.usb.org/developers/devclass_docs/ccid_classspec_1_00a.pdf
565  [2] http://www.gemplus.com/products/gempc433/  [2] http://www.gemplus.com/products/gempc433/
566  [3] http://www.gemplus.com/products/gempckey/  [3] http://www.gemplus.com/products/gempckey/
567  [4] http://www.gemplus.com/products/gempctwin/  [4] http://www.gemplus.com/products/gempctwin/
568  [5] http://www.omnikey.com/en/produkt_details.php3?produkt=1&variante=47  [5] http://www.omnikey.com/?id=products&tx_okprod_pi1[product]=21
569  [6] http://www.scmmicro.com/security/SCR331.html  [6] http://www.scmmicro.com/security/SCR331.html
570  [7] http://www.scmmicro.com/security/SCR335.html  [7] http://www.scmmicro.com/security/SCR335.html
571  [8] http://www.c3po.es/ltc31.html  [8] http://www.c3po.es/ltc31.html
# Line 311  Bibliography: Line 576  Bibliography:
576  [13] http://www.c3po.es/ltc32.html  [13] http://www.c3po.es/ltc32.html
577  [14] http://www.c3po.es/tltc2usb.html  [14] http://www.c3po.es/tltc2usb.html
578  [15] http://www.scmmicro.com/security/SCR333.html  [15] http://www.scmmicro.com/security/SCR333.html
579  [16] http://www.acs.com.hk/Product_Readers.asp?productID=59&PCate=Products_PC_Linked_SmartCard_Readers  [16] http://www.acs.com.hk/Product_Readers.asp?productID=107&PCate=Products_PC_Linked_SmartCard_Readers
580  [17] http://www.scmmicro.com/support/pcs_product_drivers.html  [17] http://www.scmmicro.com/support/pcs_product_drivers.html
581  [18] http://www.cherrycorp.com/english/advanced-line/advanced-line_smartboard_g83-6744.htm  [18] http://www.cherrycorp.com/english/advanced-line/advanced-line_smartboard_g83-6744.htm
582  [19] http://www.kobil.com/e/products/smartcard/kaan-base.php  [19] http://www.kobil.com/e/products/smartcard/kaan-base.php
583  [20] http://www.kobil.com/e/products/smartcard/kaan-advanced.php  [20] http://www.kobil.com/e/products/smartcard/kaan-advanced.php
584    [21] http://www.kobil.com/d/products/smartcard/kaansim3.php
585    [22] http://www.kobil.com/e/products/index.php?s=midentity
586    [23] http://www.ntt.com/jpki/SCR331DI.html
587    [24] http://www.verisign.co.uk/products-services/security-services/unified-authentication/usb-tokens/
588    [25] http://www.eutron.com/simpocket.asp
589    [26] http://www.cryptoidentity.eutron.com/eng/home.asp
590    [27] http://www.cherry.de/english/advanced-line/advanced_smartterminal_st-1044u.htm
591    [28] http://www.ntt.com/jpki/scr3310.html
592    [29] http://www.asedrive.com/product.asp?pid=1
593    [30] http://www.scmmicro.com/security/SCR3310.html
594    [31] http://scmmicro.com/security/SCR3311.html
595    [31] http://scmmicro.com/security/SCR3320.html
596    [32] http://www.smartepad.com.br/
597    [33] http://www.omnikey.com/?id=products&tx_okprod_pi1[product]=37
598    [34] http://www.scmmicro.com/security/SCR3340.html
599    [35] http://www.cherry.de/deutsch/advanced-line/advanced_smart_terminal_st-2000u.htm
600    [36] http://www.omnikey.com/index.php?id=products&tx_okprod_pi1[product]=29
601    [37] http://www.omnikey.com/index.php?id=products&tx_okprod_pi1[product]=33
602    [38] http://www.reflexreaders.com/Products/reflex_usbnew.html
603    [39] http://www.scmmicro.com/security/SDI_010.html
604    [40] http://www.winbond.com.tw/E-WINBONDHTM/partner/b_2_e_4.htm
605    [41] http://www.gemplus.com/products/gempc_card/
606    [42] http://www.asedrive.com/product.asp?pid=2
607    [43] http://www.omnikey.com/?id=products&tx_okprod_pi1[product]=31
608    [44] http://h18000.www1.hp.com/products/quickspecs/12346_na/12346_na.HTML
609    [45] http://www.id3semiconductors.com/produits/cl1356D.htm
610    [46] http://www.alcormicro.com/products_detail.php?main_id=8&p_id=21
611    [47] http://www.tai-hao.com/english/products_detail.php?main_id=4&second_id=13&p_id=53&now_rows=1
612    [48] http://www.id3semiconductors.com/produits/cl1356T.htm
613    [49] http://www.omnikey.com/index.php?id=products&tx_okprod_pi1[product]=48
614    [50] http://www.rsasecurity.com/products/securid/datasheets/SID800_DS_0205.pdf
615    [51] http://www.omnikey.com/?id=products&tx_okprod_pi1[product]=39
616    [52] http://www.teobyxiring.com/
617    [53] http://www.fujitsu-siemens.com/solutions/business_solutions/security/security_products/smartcase_scr_usbex.html
618    [54] http://www.fujitsu-siemens.com/solutions/business_solutions/security/security_products/smartcase_kbpc_cx.html
619    [55] http://omnikey.aaitg.com/?id=products&tx_okprod_pi1[product]=50
620    [56] http://omnikey.aaitg.com/?id=products&tx_okprod_pi1[product]=41
621    [57] http://www.gi-de.com/portal/page?_pageid=42,126834&_dad=portal&_schema=PORTAL
622    [58] http://www.eutronsec.com/infosecurity/Contents/ProductLine/Details.aspx?IDProd=26&IDFamiglia=3
623    [59] http://www.eutronsec.com/infosecurity/Contents/ProductLine/Details.aspx?IDProd=62&IDFamiglia=39
624    [60] http://www.lexar.com/enterprise/ent_ppsd.html
625    
626  $Id$  $Id$
627    
Legend:
Removed from v.1326  
changed lines
  Added in v.2819
  ViewVC Help
Powered by ViewVC 1.1.5