/[pcsclite]/trunk/Drivers/ccid/README
ViewVC logotype

Diff of /trunk/Drivers/ccid/README

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 1326 by rousseau, Sun Feb 20 14:07:40 2005 UTC revision 2809 by rousseau, Fri Feb 8 14:43:36 2008 UTC
# Line 20  Supported CCID readers: Line 20  Supported CCID readers:
20  =======================  =======================
21    
22  (in alphabetical order)  (in alphabetical order)
23  - Advanced Card Systems ACR 38 [16]  - ActivCard USB reader 3.0
24    - Advanced Card Systems ACR 38U-CCID [16]
25    old versions of this reader have a bug: the reader do timeout when a    old versions of this reader have a bug: the reader do timeout when a
26    special USB frame is sent from the reader. If the frame size if a    special USB frame is sent from the reader. If the frame size if a
27    multiple of wMaxPacketSize the communication is stopped.    multiple of wMaxPacketSize the communication is stopped.
28    - Alcor Micro AU9520 [46]
29      Firmware 1.01 is bogus. The time request sent by the card is not
30      forwarded by the reader to the host.
31    - Athena ASE IIIe USB V2 [29]
32    - Athena ASE IIIe KB USB [42]
33    - Blutronics Bludrive II CCID
34    - C3PO LTC31 (new model, USB product id 0x0006) [8]
35  - Cherry XX33 keyboard [?]  - Cherry XX33 keyboard [?]
36    - Cherry XX44 keyboard (SmartBoard G83-6744) [18]
37    - Cherry SmartTerminal ST2000U [35]
38    - Cherry ST-1044U [27]
39  - Dell keyboard SK-3106 [?]  - Dell keyboard SK-3106 [?]
40  - Dell smart card reader keyboard [?]  - Dell smart card reader keyboard [?]
41    - Eutron Digipass 860 [59]
42    - Eutron SIM Pocket Combo [25]
43    - Eutron CryptoIdentity [26]
44    - Eutron Smart Pocket [58]
45  - Gemplus GemPC 433 SL [2]  - Gemplus GemPC 433 SL [2]
46    - Gemplus GemPC Card [41]
47  - Gemplus GemPC Key [3]  - Gemplus GemPC Key [3]
48    - Gemplus GemPC PinPad
49  - Gemplus GemPC Twin [4]  - Gemplus GemPC Twin [4]
50    - Gemplus GemCore POS Pro
51    - Gemplus GemCore SIM Pro
52  - Kobil KAAN Base [19]  - Kobil KAAN Base [19]
53  - Kobil KAAN Advanced [20]  - Kobil KAAN Advanced [20]
54    - Kobil KAAN SIM III [21]
55  - OmniKey CardMan 3121 [5]  - OmniKey CardMan 3121 [5]
56    - RSA SecureID SID800 [50]
57  - SCM Micro SCR 331 [6]  - SCM Micro SCR 331 [6]
58    You shall upgrade the firmware [17] using version 5.18 or later.    You shall upgrade the firmware [17] using version 5.18 or later.
59  - SCM Micro SCR 331-DI [11]  - SCM Micro SCR 331-DI [11]
# Line 40  Supported CCID readers: Line 61  Supported CCID readers:
61  - SCM Micro SCR 335 [7]  - SCM Micro SCR 335 [7]
62    The firmware of this reader can't be upgraded so be sure to buy a    The firmware of this reader can't be upgraded so be sure to buy a
63    recent model with firmware 5.14 or later    recent model with firmware 5.14 or later
64    - SCM Micro SCR 355
65    - SCM Micro SCR 3310 [30]
66    - SCM Micro SCR 3311 [31]
67  - SCM Micro SPR 532 [9]  - SCM Micro SPR 532 [9]
68    You shall contact Torsten Maykranz <tmaykranz@scmmicro.de> to get a    You shall contact Torsten Maykranz <tmaykranz@scmmicro.de> to get a
69    firmware upgrade.    firmware upgrade.
70    - SmartEpad (v 2.0) [32]
71      The firmware gives a very strange description of the reader (like a
72      dwDefaultClock: 1024.000 MHz). So do not expect a perfect behavior.
73    - Verisign Secure Storage Token [24]
74    - Verisign Secure Token [?]
75    - Xiring Teo [52]
76    
77    
78  Should work but untested by me:  Should work but untested by me:
# Line 52  I would like to get these readers to per Line 82  I would like to get these readers to per
82  move them in the supported list above. If you are one of the  move them in the supported list above. If you are one of the
83  manufacturers, please, contact me.  manufacturers, please, contact me.
84    
85  - Cherry XX44 keyboard (SmartBoard G83-6744) [18]  - Axalto Reflex USB v3 [38]
 - ActivCard USB reader 2.0 [10]  
86  - C3PO LTC32 [13]  - C3PO LTC32 [13]
87    - C3PO TLTC2USB
88    - C3PO KBR36
89    - Charismathics token
90    - Gemplus GemPC Express
91    - Fujitsu Siemens Computers SmartCard USB 2A [53]
92    - Fujitsu Siemens Computers SmartCard Keyboard USB 2A [54]
93    - Giesecke & Devrient StarSign Card Token 350 (ICCD) [57]
94    - Giesecke & Devrient StarSign Card Token 550 (ICCD)
95    - HP USB Smart Card Keyboard [44]
96    - HP USB Smartcard Reader
97    - id3 Semiconductors CL1356D [45] (tested by me but I don't have the
98      reader anymore)
99    - id3 Semiconductors CL1356T [48] (it should be the same firmware as the
100      CL1356D)
101    - Kobil EMV CAP - SecOVID Reader III
102    - Lenovo Integrated Smart Card Reader
103    - Lexar/Gemalto Smart Enterprise Guardian [60]
104    - OmniKey CardMan 1021
105    - OmniKey CardMan 3021 [49]
106    - OmniKey CardMan 3621 [43]
107    - OmniKey CardMan 3821 [37]
108    - OmniKey CardMan 4321 [55]
109    - OmniKey CardMan 5121 [33]
110    - OmniKey CardMan 5125 [51]
111    - OmniKey CardMan 5321 [56]
112    - OmniKey CardMan 6121 [36]
113    - O2Micro Oz776 (0x7762 and 0x7772 versions)
114    - Philips JCOP41V221
115    - SafeNet IKey4000
116    - SCM Micro SCR 331-DI NTTCom [23]
117    - SCM Micro SCR 3310-NTTCOM [28]
118    - SCM Micro SCR 3320 [32]
119  - SCM Micro SCR 333 [15]  - SCM Micro SCR 333 [15]
120    - SCM Micro SDI 010 [39]
121    - SCM SCR 3340 ExpressCard54 [34]
122    - SchlumbergerSema Cyberflex Access e-gate ICCD
123  - Silitek SK-3105 keyboard [12] or C3PO TLTC2USB [14]  - Silitek SK-3105 keyboard [12] or C3PO TLTC2USB [14]
124    - Sitecom USB simcard reader MD-010
125    - Winbond Electronics (for OEM only) [40]
126    
127    
128  Unsupported or partly supported CCID readers:  Unsupported or partly supported CCID readers:
129  =============================================  =============================================
130    
131  - C3PO LTC31 [8]  - ActivCard USB reader 2.0 [10]
132        The reader do timeout when a special USB frame is sent from the
133        reader. If the frame size if a multiple of wMaxPacketSize the
134        communication is stopped.
135    - C3PO LTC31 (old model, USB product id 0x0003) [8]
136      The reader works fine with Linux kernel 2.4 but does not with Linux      The reader works fine with Linux kernel 2.4 but does not with Linux
137      kernel 2.6. The ioctl() syscall returns EINVAL (Invalid argument)      kernel 2.6. The ioctl() syscall returns EINVAL (Invalid argument)
138    - iDream (THRC2002-2) [47]
139        PPS fails with a Cryptoflex card
140        powerup fails with a Setcos card
141        does work with the belgium eID (the reader is sold for this
142        application)
143    - Kobil mIDentity [22]
144        Time requests are not managed correctly and make the firmware fails.
145        This is not a problem unless you use a time-consuming APDU like RSA
146        key generation.
147        A new firmware will correct the bug.
148    - Reiner-SCT cyberJack pinpad(a)
149        Time requests are not managed and the driver may time out without
150        any response from the reader.  This is not a problem unless you use
151        a time-consuming APDU like RSA key generation.
152    
153    
154  Supported operating systems:  Supported operating systems:
# Line 79  Debug informations: Line 163  Debug informations:
163  ===================  ===================
164    
165  The driver uses the debug function provided by pcscd. So if pcscd sends  The driver uses the debug function provided by pcscd. So if pcscd sends
166  its debug to stdout (pcscd --foreground) then the CCID will also send  its debug to stderr (pcscd --foreground) then the CCID will also send
167  its debug to stdout. If pcscd sends its debug to syslog (by default)  its debug to stderr. If pcscd sends its debug to syslog (by default)
168  then the CCID will also send its debug to syslog.  then the CCID will also send its debug to syslog.
169    
170  You can change the debug level using the Info.plist configuraion file.  You can change the debug level using the Info.plist configuration file.
171  The Info.plist is installed, by default, in  The Info.plist is installed, by default, in
172  /usr/local/pcsc/drivers/ifd-ccid.bundle/Contents/Info.plist  /usr/local/pcsc/drivers/ifd-ccid.bundle/Contents/Info.plist
173    
# Line 91  The debug level is set in the ifdLogLeve Line 175  The debug level is set in the ifdLogLeve
175  combinaison of 4 different levels.  combinaison of 4 different levels.
176  - 1: critical: important error messages  - 1: critical: important error messages
177  - 2: info:     informative messages like what reader was detected  - 2: info:     informative messages like what reader was detected
178  - 4: periodic: periodic info when pcscd test if a card is present (every  - 4: comm:     a dump of all the bytes exchanged between the host and the
                1/10 of a second)  
 - 8: comm:     a dump of all the bytes exchanged between the host and the  
179                 reader                 reader
180    - 8: periodic: periodic info when pcscd test if a card is present (every
181                   1/10 of a second)
182    
183  By default the debug level is set to 3 (1 + 2) and correspond to the  By default the debug level is set to 3 (1 + 2) and correspond to the
184  critical and info levels.  critical and info levels.
# Line 120  MacOSX libusb Line 204  MacOSX libusb
204  Licence:  Licence:
205  ========  ========
206    
207    This program is free software; you can redistribute it and/or modify    This library is free software; you can redistribute it and/or modify it
208  it under the terms of the GNU General Public License as published by the  under the terms of the GNU Lesser General Public License as published by
209  Free Software Foundation; either version 2 of the License, or (at your  the Free Software Foundation; either version 2.1 of the License, or (at
210  option) any later version.  your option) any later version.
211    
212    This program is distributed in the hope that it will be useful, but    This library is distributed in the hope that it will be useful, but
213  WITHOUT ANY WARRANTY; without even the implied warranty of  WITHOUT ANY WARRANTY; without even the implied warranty of
214  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser
215  General Public License for more details.  General Public License for more details.
216    
217    You should have received a copy of the GNU General Public License    You should have received a copy of the GNU Lesser General Public License
218  along with this program; if not, write to the Free Software Foundation,  along with this library; if not, write to the Free Software Foundation,
219  Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA  Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307  USA
220    
221    
222  History:  History:
223  ========  ========
224    
225    1.3.4 - 8 February 2008, Ludovic Rousseau
226        - the serial driver could not be loaded because of the missing
227          symbol InterruptRead
228        - remove WAIT_FOR_SYSFS="bInterfaceProtocol" to do not delay udev
229    
230    
231    1.3.3 - 6 February 2008, Ludovic Rousseau
232        - add support for Lexar Smart Enterprise Guardian and Blutronics
233          Bludrive II CCID
234        - add support of TAG_IFD_POLLING_THREAD using IFDHPolling() to
235          detect asynchronous card movements. With this feature pcscd will
236          not poll the reader every 0.4 second for a card movement but will
237          wait until the reader sends a USB interrupt signal
238        - correct a bug with an ICCD-B device and a receive buffer smaller
239          than 4 bytes
240        - remove the sleep in the udev rule. It slows down the detection of
241          any USB device
242        - some minor bugs removed
243    
244    
245    1.3.2 - 22 January 2008, Ludovic Rousseau
246        - add support of Apple Mac OS X Leopard (10.5.1)
247        - solve a hotplug problem on Ubuntu 7.10 (reader was not detected)
248        - create a symlink from libccidtwin.so to libccidtwin.so.VERSION so
249          that the /etc/reader.conf configuration file do not need to edited
250          for each new driver version
251        - make driver for the GemPC Serial compile again
252        - some minor bugs removed
253    
254    
255    1.3.1 - 16 November 2007, Ludovic Rousseau
256        - add support for "Philips Semiconductors JCOP41V221" ICCD card,
257          O2Micro oz776 (ProductID 0x7772), CardMan5321, Giesecke & Devrient
258          StarSign Card Token 350 and 550, SafeNet IKey4000, Eutron
259          CryptoIdentity, Eutron Smart Pocket, Eutron Digipass 860, Lenovo
260          Integrated Smart Card Reader, "Kobil EMV CAP - SecOVID Reader III,
261          Charismathics token, Reiner-SCT cyberJack pinpad(a)
262        - improve support of Mac OS X and *BSD
263        - some minor bugs removed
264    
265    
266    1.3.0 - 10 May 2007, Ludovic Rousseau
267        - add support of ICCD version A and B
268        - add support for (new) KOBIL mIDentity, SchlumbergerSema Cyberflex
269          Access e-gate ICCD, Fujitsu Siemens Computers SmartCard USB 2A and
270          SmartCard Keyboard USB 2A readers, OmniKey CardMan 4321
271        - contrib/RSA_SecurID/RSA_SecurID_getpasswd: tool to get the on time
272          password also displayed on the token screen
273        - contrib/Kobil_mIDentity_switch: tool to activate the CCID reader
274          of the Kobil mIDentity. The tool should be started automatically
275          by the udev rule on Linux
276        - GemPC pinpad: localisation of the string "PIN blocked", add
277          Portuguese(pt), Dutch(nl) and Turkish(tr) localisations
278        - some minor bugs removed
279    
280    1.2.1 - 27 January 2007, Ludovic Rousseau
281        - pcscd_ccid.rules: add non CCID generic (InterfaceClass: 0xFF)
282          readers
283        - INSTALL: document how to use --enable-udev on FreeBSD
284        - move the O2Micro Oz7762 from the unsupported to the supported list
285          since patches to support it are applied by default
286          (O2MICRO_OZ776_PATCH)
287    
288    
289    1.2.0 - 19 January 2007, Ludovic Rousseau
290        - add support for SCARD_ATTR_VENDOR_IFD_VERSION,
291          SCARD_ATTR_VENDOR_NAME and SCARD_ATTR_MAXINPUT tags used by
292          SCardGetAttrib(). Read SCARDGETATTRIB.txt for more documentation
293        - add support for OmniKey CardMan 5125, CardMan 1021, C3PO LTC32,
294          Teo by Xiring, HP USB Smartcard Reader
295        - use --enable-twinserial to build the serial reader driver
296        - use --enable-udev to configure for a use with Linux udev hotplug
297          mechanism. This will allow pcscd to avoid polling the USB bus
298          every 1 second
299        - some minor bugs removed
300    
301    
302    1.1.0 - 11 August 2006, Ludovic Rousseau
303        - support Extended APDU (up to 64KB) for readers in TPDU mode (many
304          readers) or Extended APDU mode (very rare). This only works for
305          T=1 cards.
306        - add support for C3PO LTC31 (new version), OmniKey CardMan 3021, HP
307          USB Smart Card Keyboard, Actividentity (ActiveCard) Activkey Sim,
308          id3 Semiconductors CL1356D and CL1356T, Alcor Micro AU9520
309        - support the contactless interface of the SCR331-DI-NTTCOM
310        - add support of FreeBSD
311        - increase the USB timeout used for PIN verify/modify to not timeout
312          before the reader
313        - the 4-bytes value returned by CM_IOCTL_GET_FEATURE_REQUEST shall
314          be encoded in big endian as documented in PCSC v2 part 10 ch 2.2
315          page 2. The applications using this feature shall be updated (to
316          respect the PCSC specification).
317        - use ./configure --enable-twinserial to compile and install the the
318          driver for the GemPC Twin serial
319        - some minor bugs removed
320    
321    
322    1.0.1 - 22 April 2006, Ludovic Rousseau
323        - add support for Axalto Reflex USB v3, SCM Micro SDI 010, Winbond
324          Electronics W81E381 chipset, Gemplus GemPC Card, Athena ASE IIIe
325          KB USB, OmniKey CardMan 3621
326        - support Solaris (Solaris uses a different libusb)
327        - better documentation for ./configure arguments
328        - improve support of Cherry XX44 keyboard for PIN verify and change
329          (circumvent firmware bugs)
330        - do not use LTPBundleFindValueWithKey() from pcscd since this
331          function has been removed from pcscd API
332        - use -fvisibility=hidden is available to limit the number of
333          exported symbols
334    
335    
336    1.0.0 - 3 March 2006, Ludovic Rousseau
337        - add support for ActivCard USB Reader 3.0, Athena ASE IIIe USB V2,
338          SCM Micro SCR 355, SCR 3311, SCR 3320, SCR 3340 ExpressCard54,
339          Gemplus GemCore SIM Pro, GemCore POS Pro (serial and USB), GemPC
340          Express (ExpressCard/54 interface), SmartEpad (v 2.0), OmniKey
341          CardMan 5121
342        - greatly improve support of PIN PAD readers. We now support TPDU
343          readers with T=1 cards
344        - use l10n strings for the Gemplus GemPC PIN PAD (it has a screen).
345          Supported languages are: de, en, es, fr, it
346        - rename ACS ACR 38 in ACR 38U-CCID since the ACR 38 is a different
347          reader and is not CCID compatible
348        - allow to select the Power On voltage using Info.plist instead of
349          recompiling the source code
350        - correct bugs in the support of multi-slots readers
351        - if the card is faster than the reader (TA1=97 for example) we try
352          to use a not-so-bad speed (corresponding to TA1=96, 95 or 94)
353          instead of the default speed of TA1=11
354        - the src/parse tool do not use the driver anymore. No need to
355          update the Info.plist file first.
356        - some minor bugs removed
357    
358    
359    0.9.4 - 27 November 2005, Ludovic Rousseau
360        - add support for Eutron SIM Pocket Combo, Eutron CryptoIdentity,
361          Verisign Secure Token and VeriSign Secure Storage Token, GemPC
362          Card (PCMCIA), SCM SCR331-DI NTTCom, SCM Micro SCR 3310-NTTCom,
363          Cherry ST-1044U, Cherry SmartTerminal ST-2XXX
364        - add support of PC/SC v2 part 10 CM_IOCTL_GET_FEATURE_REQUEST add
365          support of FEATURE_VERIFY_PIN_DIRECT and FEATURE_MODIFY_PIN_DIRECT
366          remove support of IOCTL_SMARTCARD_VENDOR_VERIFY_PIN (now
367          obsoleted). A sample code is available in examples/scardcontrol.c
368        - we need pcsc-lite 1.2.9-beta9 since some structures used for PIN
369          pad readers are defined by pcsc-lite
370        - some (bogus) cards require an extra EGT but the ATR does not say
371          so. We try to detect the bogus cards and set TC1=2
372        - IFDHSetProtocolParameters(): only use a data rate supported by the
373          reader in the PPS negociation, otherwise we stay at the default
374          speed.
375        - calculate and store the read timeout according to the card ATR
376          instead of using a fixed value of 60 seconds
377        - increase the read timeout if the card sends and WTX request
378        - improve support of GemPC Twin and GemPC Card (serial protocol)
379        - reset the device on close only if DRIVER_OPTION_RESET_ON_CLOSE is
380          set. The problem was that a device reset also disconnects the
381          keyboard on a keyboard + reader device.
382        - use color logs
383        - some minor bugs removed
384    
385    
386    0.9.3 - 14 March 2005, Ludovic Rousseau
387        - change the licence from GNU GPL to GNU Lesser GPL (LGPL)
388        - add support for ACS ACR 38, Kobil KAAN Base, Kobil KAAN Advanced,
389          Kobil KAAN SIM III, Kobil KAAN mIDentity, SCM Micro SCR 331,
390          SCM Micro SCR 331-DI, SCM Micro SCR 335, SCM Micro SCR 3310,
391          SCM Micro SCR 532, Cherry XX44 readers
392        - improve communication speed with readers featuring "Automatic PPS
393          made by the CCID"
394        - switch the Cherry xx33 reader in ISO mode if power up in EMV mode
395          fails.
396        - add support of character level readers. Thanks to O2Micro for the
397          patch
398        - add support for the O2Micro OZ776S reader but the reader firmware
399          is still bogus
400        - check firmware version to avoid firmwares with bugs. You can still
401          use a bogus firmware by setting DRIVER_OPTION_USE_BOGUS_FIRMWARE
402          in Info.plist
403        - some minor bugs removed
404    
405  0.9.2 - 15 August 2004, Ludovic Rousseau  0.9.2 - 15 August 2004, Ludovic Rousseau
406      - T=1 TPDU code:      - T=1 TPDU code:
407        . the work on T=1 TPDU code was possible thanks to Gemplus        . the work on T=1 TPDU code was possible thanks to Gemplus
408          validation team who helped me test, debug and bring the code to          validation team who helped me test, debug and bring the code to
409          an EMV validation level. Thanks to Jérôme, Jean-Yves, Xavier and          an EMV validation level. Thanks to Jérôme, Jean-Yves, Xavier and
410          the Gemplus readers department          the Gemplus readers department
411        . error code was not checked correctly        . error code was not checked correctly
412        . avoid a (nearly) infinite loop when resynch are needed.        . avoid a (nearly) infinite loop when resynch are needed.
# Line 252  History: Line 516  History:
516      - move LTC31 reader from unsupported to supported reader list. It      - move LTC31 reader from unsupported to supported reader list. It
517        was my f ault since in used odd INS byte in my test applet and odd        was my f ault since in used odd INS byte in my test applet and odd
518        INS bytes are forbidden by ISO 7816-4 ch. 5.4.2 Instruction byte.        INS bytes are forbidden by ISO 7816-4 ch. 5.4.2 Instruction byte.
519        Thanks to Josep Moné s Teixidor for pointing the problem.        Thanks to Josep Moné s Teixidor for pointing the problem.
520      - src/commands.c: comment out the automatic GET RESPONSE part. I      - src/commands.c: comment out the automatic GET RESPONSE part. I
521        don't think it should be in the driver. Maybe in pcscd instead?        don't think it should be in the driver. Maybe in pcscd instead?
522    
# Line 263  History: Line 527  History:
527      - add --enable-libusb=PATH option is your libusb is not installed in      - add --enable-libusb=PATH option is your libusb is not installed in
528        /usr or /usr/local        /usr or /usr/local
529      - honor DESTDIR in install rules (closes [ #300110 ]). Thanks to      - honor DESTDIR in install rules (closes [ #300110 ]). Thanks to
530        Ville Skyttä for the patch.        Ville Skyttä for the patch.
531      - src/ccid.c: do not switch the GemPC Key and GemPC Twin in APDU      - src/ccid.c: do not switch the GemPC Key and GemPC Twin in APDU
532        mode since it also swicth in EMV mode and may not work with non        mode since it also swicth in EMV mode and may not work with non
533        EMV cards        EMV cards
# Line 293  History: Line 557  History:
557      - First public release      - First public release
558    
559    
560  Bibliography:  References:
561  =============  ===========
562    
563  [1] http://www.usb.org/developers/devclass_docs/ccid_classspec_1_00a.pdf  [1] http://www.usb.org/developers/devclass_docs/ccid_classspec_1_00a.pdf
564  [2] http://www.gemplus.com/products/gempc433/  [2] http://www.gemplus.com/products/gempc433/
565  [3] http://www.gemplus.com/products/gempckey/  [3] http://www.gemplus.com/products/gempckey/
566  [4] http://www.gemplus.com/products/gempctwin/  [4] http://www.gemplus.com/products/gempctwin/
567  [5] http://www.omnikey.com/en/produkt_details.php3?produkt=1&variante=47  [5] http://www.omnikey.com/?id=products&tx_okprod_pi1[product]=21
568  [6] http://www.scmmicro.com/security/SCR331.html  [6] http://www.scmmicro.com/security/SCR331.html
569  [7] http://www.scmmicro.com/security/SCR335.html  [7] http://www.scmmicro.com/security/SCR335.html
570  [8] http://www.c3po.es/ltc31.html  [8] http://www.c3po.es/ltc31.html
# Line 311  Bibliography: Line 575  Bibliography:
575  [13] http://www.c3po.es/ltc32.html  [13] http://www.c3po.es/ltc32.html
576  [14] http://www.c3po.es/tltc2usb.html  [14] http://www.c3po.es/tltc2usb.html
577  [15] http://www.scmmicro.com/security/SCR333.html  [15] http://www.scmmicro.com/security/SCR333.html
578  [16] http://www.acs.com.hk/Product_Readers.asp?productID=59&PCate=Products_PC_Linked_SmartCard_Readers  [16] http://www.acs.com.hk/Product_Readers.asp?productID=107&PCate=Products_PC_Linked_SmartCard_Readers
579  [17] http://www.scmmicro.com/support/pcs_product_drivers.html  [17] http://www.scmmicro.com/support/pcs_product_drivers.html
580  [18] http://www.cherrycorp.com/english/advanced-line/advanced-line_smartboard_g83-6744.htm  [18] http://www.cherrycorp.com/english/advanced-line/advanced-line_smartboard_g83-6744.htm
581  [19] http://www.kobil.com/e/products/smartcard/kaan-base.php  [19] http://www.kobil.com/e/products/smartcard/kaan-base.php
582  [20] http://www.kobil.com/e/products/smartcard/kaan-advanced.php  [20] http://www.kobil.com/e/products/smartcard/kaan-advanced.php
583    [21] http://www.kobil.com/d/products/smartcard/kaansim3.php
584    [22] http://www.kobil.com/e/products/index.php?s=midentity
585    [23] http://www.ntt.com/jpki/SCR331DI.html
586    [24] http://www.verisign.co.uk/products-services/security-services/unified-authentication/usb-tokens/
587    [25] http://www.eutron.com/simpocket.asp
588    [26] http://www.cryptoidentity.eutron.com/eng/home.asp
589    [27] http://www.cherry.de/english/advanced-line/advanced_smartterminal_st-1044u.htm
590    [28] http://www.ntt.com/jpki/scr3310.html
591    [29] http://www.asedrive.com/product.asp?pid=1
592    [30] http://www.scmmicro.com/security/SCR3310.html
593    [31] http://scmmicro.com/security/SCR3311.html
594    [31] http://scmmicro.com/security/SCR3320.html
595    [32] http://www.smartepad.com.br/
596    [33] http://www.omnikey.com/?id=products&tx_okprod_pi1[product]=37
597    [34] http://www.scmmicro.com/security/SCR3340.html
598    [35] http://www.cherry.de/deutsch/advanced-line/advanced_smart_terminal_st-2000u.htm
599    [36] http://www.omnikey.com/index.php?id=products&tx_okprod_pi1[product]=29
600    [37] http://www.omnikey.com/index.php?id=products&tx_okprod_pi1[product]=33
601    [38] http://www.reflexreaders.com/Products/reflex_usbnew.html
602    [39] http://www.scmmicro.com/security/SDI_010.html
603    [40] http://www.winbond.com.tw/E-WINBONDHTM/partner/b_2_e_4.htm
604    [41] http://www.gemplus.com/products/gempc_card/
605    [42] http://www.asedrive.com/product.asp?pid=2
606    [43] http://www.omnikey.com/?id=products&tx_okprod_pi1[product]=31
607    [44] http://h18000.www1.hp.com/products/quickspecs/12346_na/12346_na.HTML
608    [45] http://www.id3semiconductors.com/produits/cl1356D.htm
609    [46] http://www.alcormicro.com/products_detail.php?main_id=8&p_id=21
610    [47] http://www.tai-hao.com/english/products_detail.php?main_id=4&second_id=13&p_id=53&now_rows=1
611    [48] http://www.id3semiconductors.com/produits/cl1356T.htm
612    [49] http://www.omnikey.com/index.php?id=products&tx_okprod_pi1[product]=48
613    [50] http://www.rsasecurity.com/products/securid/datasheets/SID800_DS_0205.pdf
614    [51] http://www.omnikey.com/?id=products&tx_okprod_pi1[product]=39
615    [52] http://www.teobyxiring.com/
616    [53] http://www.fujitsu-siemens.com/solutions/business_solutions/security/security_products/smartcase_scr_usbex.html
617    [54] http://www.fujitsu-siemens.com/solutions/business_solutions/security/security_products/smartcase_kbpc_cx.html
618    [55] http://omnikey.aaitg.com/?id=products&tx_okprod_pi1[product]=50
619    [56] http://omnikey.aaitg.com/?id=products&tx_okprod_pi1[product]=41
620    [57] http://www.gi-de.com/portal/page?_pageid=42,126834&_dad=portal&_schema=PORTAL
621    [58] http://www.eutronsec.com/infosecurity/Contents/ProductLine/Details.aspx?IDProd=26&IDFamiglia=3
622    [59] http://www.eutronsec.com/infosecurity/Contents/ProductLine/Details.aspx?IDProd=62&IDFamiglia=39
623    [60] http://www.lexar.com/enterprise/ent_ppsd.html
624    
625  $Id$  $Id$
626    
Legend:
Removed from v.1326  
changed lines
  Added in v.2809
  ViewVC Help
Powered by ViewVC 1.1.5