/[pcsclite]/tags/ccid/ccid-1.4.5/README

Diff of /tags/ccid/ccid-1.4.5/README

Parent Directory | Revision Log | View Patch Patch

-revision 1730 by rousseau,
Tue Nov 22 09:38:29 2005 UTC
+revision 2931 by rousseau,
Thu May  8 12:31:07 2008 UTC
 Line 20 
 Supported CCID readers:
  =======================
  (in alphabetical order)
- - Advanced Card Systems ACR 38 [16]
+ - ActivCard USB reader 3.0
+ - ActivCard Activkey Sim [66]
+ - Advanced Card Systems ACR 38U-CCID [16]
    old versions of this reader have a bug: the reader do timeout when a
    special USB frame is sent from the reader. If the frame size if a
    multiple of wMaxPacketSize the communication is stopped.
+ - Alcor Micro AU9520 [46]
+   Firmware 1.01 is bogus. The time request sent by the card is not
+   forwarded by the reader to the host.
+ - Athena ASE IIIe USB V2 [29]
+ - Athena ASE IIIe KB USB [42]
+ - Blutronics Bludrive II CCID
+ - C3PO LTC31 (new model, USB product id 0x0006) [8]
  - Cherry XX33 keyboard [?]
  - Cherry XX44 keyboard (SmartBoard G83-6744) [18]
+ - Cherry SmartTerminal ST2000U [35]
  - Cherry ST-1044U [27]
+ - Covadis Alya [63]
  - Dell keyboard SK-3106 [?]
  - Dell smart card reader keyboard [?]
- - Eutron SIM Pocket Combo [25]
  - Eutron CryptoIdentity [26]
- - Gemplus GemPC 433 SL [2]
+ - Eutron Digipass 860 [59]
- - Gemplus GemPC Key [3]
+ - Eutron SIM Pocket Combo [25]
- - Gemplus GemPC Twin [4]
+ - Eutron Smart Pocket [58]
+ - Gemalto GemPC 433 SL [2] (old name: GemPC 433 SL)
+ - Gemalto GemPC Card [41]
+ - Gemalto GemPC PinPad [67]
+ - Gemalto GemPC Twin [4]
+ - Gemalto GemCore POS Pro
+ - Gemalto GemCore SIM Pro
+ - Gemalto USB Shell Token V2 [3] (old name GemPC Key)
  - Kobil KAAN Base [19]
  - Kobil KAAN Advanced [20]
  - Kobil KAAN SIM III [21]
- - Kobil mIDentity [22]
  - OmniKey CardMan 3121 [5]
+ - RSA SecureID SID800 [50]
  - SCM Micro SCR 331 [6]
    You shall upgrade the firmware [17] using version 5.18 or later.
  - SCM Micro SCR 331-DI [11]
-Line 46 
 Supported CCID readers:
+Line 63 
 Supported CCID readers:
  - SCM Micro SCR 335 [7]
    The firmware of this reader can't be upgraded so be sure to buy a
    recent model with firmware 5.14 or later
- - SCM Micro SCR 3310
+ - SCM Micro SCR 355
+ - SCM Micro SCR 3310 [30]
+ - SCM Micro SCR 3311 [31]
  - SCM Micro SPR 532 [9]
    You shall contact Torsten Maykranz <tmaykranz@scmmicro.de> to get a
    firmware upgrade.
+ - SmartEpad (v 2.0) [32]
+   The firmware gives a very strange description of the reader (like a
+   dwDefaultClock: 1024.000 MHz). So do not expect a perfect behavior.
  - Verisign Secure Storage Token [24]
  - Verisign Secure Token [?]
+ - Xiring Teo [52]
  Should work but untested by me:
-Line 61 
 I would like to get these readers to per
+Line 84 
 I would like to get these readers to per
  move them in the supported list above. If you are one of the
  manufacturers, please, contact me.
- - ActivCard USB reader 2.0 [10]
+ - Advanced Card Systems ACR122 [62]
+ - Axalto Reflex USB v3 [38]
  - C3PO LTC32 [13]
+ - C3PO TLTC2USB
+ - C3PO KBR36
+ - Charismathics token
+ - Cherry SmartBoard, G83-6610 [61]
+ - Covadis Véga [64]
+ - Gemplus GemPC Express
+ - Gemplus Gem e-Seal Pro
+ - Fujitsu Siemens Computers SmartCard USB 2A [53]
+ - Fujitsu Siemens Computers SmartCard Keyboard USB 2A [54]
+ - Giesecke & Devrient StarSign Card Token 350 (ICCD) [57]
+ - Giesecke & Devrient StarSign Card Token 550 (ICCD)
+ - HP USB Smart Card Keyboard [44]
+ - HP USB Smartcard Reader
+ - id3 Semiconductors CL1356D [45] (tested by me but I don't have the
+   reader anymore)
+ - id3 Semiconductors CL1356T [48] (it should be the same firmware as the
+   CL1356D)
+ - Kobil EMV CAP - SecOVID Reader III
+ - Lenovo Integrated Smart Card Reader
+ - Lexar/Gemalto Smart Enterprise Guardian [60]
+ - OmniKey CardMan 1021
+ - OmniKey CardMan 3021 [49]
+ - OmniKey CardMan 3621 [43]
+ - OmniKey CardMan 3821 [37]
+ - OmniKey CardMan 4321 [55]
+ - OmniKey CardMan 5121 [33]
+ - OmniKey CardMan 5125 [51]
+ - OmniKey CardMan 5321 [56]
+ - OmniKey CardMan 6121 [36]
+ - O2Micro Oz776 (0x7762 and 0x7772 versions)
+ - Philips JCOP41V221
+ - SafeNet IKey4000
  - SCM Micro SCR 331-DI NTTCom [23]
  - SCM Micro SCR 3310-NTTCOM [28]
+ - SCM Micro SCR 3320 [31b]
  - SCM Micro SCR 333 [15]
+ - SCM Micro SDI 010 [39]
+ - SCM SCR 3340 ExpressCard54 [34]
+ - SchlumbergerSema Cyberflex Access e-gate ICCD
  - Silitek SK-3105 keyboard [12] or C3PO TLTC2USB [14]
+ - Sitecom USB simcard reader MD-010
+ - Validy USB Token [65]
+ - Vasco DP905
+ - Winbond Electronics (for OEM only) [40]
  Unsupported or partly supported CCID readers:
  =============================================
- - C3PO LTC31 [8]
+ - ActivCard USB reader 2.0 [10]
+     The reader do timeout when a special USB frame is sent from the
+     reader. If the frame size if a multiple of wMaxPacketSize the
+     communication is stopped.
+ - C3PO LTC31 (old model, USB product id 0x0003) [8]
      The reader works fine with Linux kernel 2.4 but does not with Linux
      kernel 2.6. The ioctl() syscall returns EINVAL (Invalid argument)
- - RSA SecureID SID800 [24]
+ - iDream (THRC2002-2) [47]
-     The USB layer is completely broken. The reader is sometimes not even
+     PPS fails with a Cryptoflex card
-     seen on the USB bus (same problem under Windows). Maybe newer
+     powerup fails with a Setcos card
-     devices will work?
+     does work with the belgium eID (the reader is sold for this
+     application)
+ - Kobil mIDentity [22]
+     Time requests are not managed correctly and make the firmware fails.
+     This is not a problem unless you use a time-consuming APDU like RSA
+     key generation.
+     A new firmware will correct the bug.
+ - Reiner-SCT cyberJack pinpad(a)
+     Time requests are not managed and the driver may time out without
+     any response from the reader.  This is not a problem unless you use
+     a time-consuming APDU like RSA key generation.
  Supported operating systems:
-Line 93 
 Debug informations:
+Line 171 
 Debug informations:
  ===================
  The driver uses the debug function provided by pcscd. So if pcscd sends
- its debug to stdout (pcscd --foreground) then the CCID will also send
+ its debug to stderr (pcscd --foreground) then the CCID will also send
- its debug to stdout. If pcscd sends its debug to syslog (by default)
+ its debug to stderr. If pcscd sends its debug to syslog (by default)
  then the CCID will also send its debug to syslog.
- You can change the debug level using the Info.plist configuraion file.
+ You can change the debug level using the Info.plist configuration file.
  The Info.plist is installed, by default, in
  /usr/local/pcsc/drivers/ifd-ccid.bundle/Contents/Info.plist
-Line 105 
 The debug level is set in the ifdLogLeve
+Line 183 
 The debug level is set in the ifdLogLeve
  combinaison of 4 different levels.
  - 1: critical: important error messages
  - 2: info:     informative messages like what reader was detected
- - 4: periodic: periodic info when pcscd test if a card is present (every
+ - 4: comm:     a dump of all the bytes exchanged between the host and the
-/10 of a second)
- - 8: comm:     a dump of all the bytes exchanged between the host and the
                 reader
+ - 8: periodic: periodic info when pcscd test if a card is present (every
+/10 of a second)
  By default the debug level is set to 3 (1 + 2) and correspond to the
  critical and info levels.
-Line 119 
 to unplug all your CCID readers so the t
+Line 197 
 to unplug all your CCID readers so the t
  replug your readers. You can also restart pcscd.
+ Voltage selection
+ =================
+ You can change the voltage level using the Info.plist configuration file.  The
+ Info.plist is installed, by default, in
+ /usr/local/pcsc/drivers/ifd-ccid.bundle/Contents/Info.plist
+ The voltage level is set in the ifdDriverOptions field. It is a binary OR
+ combinaison of 4 different levels.
+ -  0: power on the card at 5V (default value)
+ - 16: power on the card at 3V and then, if 3V fails then use 5V
+ - 32: power on the card at 1.8V, then 3V and then 5V
+ - 48: let the reader decide
+ By default the voltage level is set to 0  and correspond to 5V.
+ You have to restart the driver so it read the configuration file again
+ and use the new debug level value.  To restart the driver you just need
+ to unplug all your CCID readers so the the driver is unloaded and then
+ replug your readers.  You can also restart pcscd.
  Known problems:
  ===============
-Line 152 
 Inc., 59 Temple Place, Suite 330, Boston
+Line 253 
 Inc., 59 Temple Place, Suite 330, Boston
  History:
  ========
+.3.6 - 30 April 2008, Ludovic Rousseau
+     - add support for Covadis Alya, Covadis Véga, Precise Biometrics 250
+       MC, Vasco DP905, Validy TokenA sl vt
+     - better support for the O2Micro OZ776, GemCore SIM Pro
+     - the environment variable LIBCCID_ifdLogLevel overwrite the value
+       of ifdLogLevel read from the Info.plist file
+     - add support for DragonFly BSD
+     - some minor bugs removed
+.3.5 - 22 February 2008, Ludovic Rousseau
+     - add support for Gemplus Gem e-Seal Pro, Cherry SmartBoard,
+       G83-6610
+     - use usb_interrupt_read() only if libusb > 0.1.12 or
+       --enable-usb-interrupt is used. libusb <= 0.1.12 is bogus and will
+       consume more CPU than needed.
+     - contrib/Kobil_mIDentity_switch/Kobil_mIDentity_switch was broken
+       on Linux since release 1.3.1
+     - some minor bugs removed
+.3.4 - 8 February 2008, Ludovic Rousseau
+     - the serial driver could not be loaded because of the missing
+       symbol InterruptRead
+     - remove WAIT_FOR_SYSFS="bInterfaceProtocol" to do not delay udev
+.3.3 - 6 February 2008, Ludovic Rousseau
+     - add support for Lexar Smart Enterprise Guardian and Blutronics
+       Bludrive II CCID
+     - add support of TAG_IFD_POLLING_THREAD using IFDHPolling() to
+       detect asynchronous card movements. With this feature pcscd will
+       not poll the reader every 0.4 second for a card movement but will
+       wait until the reader sends a USB interrupt signal
+     - correct a bug with an ICCD-B device and a receive buffer smaller
+       than 4 bytes
+     - remove the sleep in the udev rule. It slows down the detection of
+       any USB device
+     - some minor bugs removed
+.3.2 - 22 January 2008, Ludovic Rousseau
+     - add support of Apple Mac OS X Leopard (10.5.1)
+     - solve a hotplug problem on Ubuntu 7.10 (reader was not detected)
+     - create a symlink from libccidtwin.so to libccidtwin.so.VERSION so
+       that the /etc/reader.conf configuration file do not need to edited
+       for each new driver version
+     - make driver for the GemPC Serial compile again
+     - some minor bugs removed
+.3.1 - 16 November 2007, Ludovic Rousseau
+     - add support for "Philips Semiconductors JCOP41V221" ICCD card,
+       O2Micro oz776 (ProductID 0x7772), CardMan5321, Giesecke & Devrient
+       StarSign Card Token 350 and 550, SafeNet IKey4000, Eutron
+       CryptoIdentity, Eutron Smart Pocket, Eutron Digipass 860, Lenovo
+       Integrated Smart Card Reader, "Kobil EMV CAP - SecOVID Reader III,
+       Charismathics token, Reiner-SCT cyberJack pinpad(a)
+     - improve support of Mac OS X and *BSD
+     - some minor bugs removed
+.3.0 - 10 May 2007, Ludovic Rousseau
+     - add support of ICCD version A and B
+     - add support for (new) KOBIL mIDentity, SchlumbergerSema Cyberflex
+       Access e-gate ICCD, Fujitsu Siemens Computers SmartCard USB 2A and
+       SmartCard Keyboard USB 2A readers, OmniKey CardMan 4321
+     - contrib/RSA_SecurID/RSA_SecurID_getpasswd: tool to get the on time
+       password also displayed on the token screen
+     - contrib/Kobil_mIDentity_switch: tool to activate the CCID reader
+       of the Kobil mIDentity. The tool should be started automatically
+       by the udev rule on Linux
+     - GemPC pinpad: localisation of the string "PIN blocked", add
+       Portuguese(pt), Dutch(nl) and Turkish(tr) localisations
+     - some minor bugs removed
+.2.1 - 27 January 2007, Ludovic Rousseau
+     - pcscd_ccid.rules: add non CCID generic (InterfaceClass: 0xFF)
+       readers
+     - INSTALL: document how to use --enable-udev on FreeBSD
+     - move the O2Micro Oz7762 from the unsupported to the supported list
+       since patches to support it are applied by default
+       (O2MICRO_OZ776_PATCH)
+.2.0 - 19 January 2007, Ludovic Rousseau
+     - add support for SCARD_ATTR_VENDOR_IFD_VERSION,
+       SCARD_ATTR_VENDOR_NAME and SCARD_ATTR_MAXINPUT tags used by
+       SCardGetAttrib(). Read SCARDGETATTRIB.txt for more documentation
+     - add support for OmniKey CardMan 5125, CardMan 1021, C3PO LTC32,
+       Teo by Xiring, HP USB Smartcard Reader
+     - use --enable-twinserial to build the serial reader driver
+     - use --enable-udev to configure for a use with Linux udev hotplug
+       mechanism. This will allow pcscd to avoid polling the USB bus
+       every 1 second
+     - some minor bugs removed
+.1.0 - 11 August 2006, Ludovic Rousseau
+     - support Extended APDU (up to 64KB) for readers in TPDU mode (many
+       readers) or Extended APDU mode (very rare). This only works for
+       T=1 cards.
+     - add support for C3PO LTC31 (new version), OmniKey CardMan 3021, HP
+       USB Smart Card Keyboard, Actividentity (ActiveCard) Activkey Sim,
+       id3 Semiconductors CL1356D and CL1356T, Alcor Micro AU9520
+     - support the contactless interface of the SCR331-DI-NTTCOM
+     - add support of FreeBSD
+     - increase the USB timeout used for PIN verify/modify to not timeout
+       before the reader
+     - the 4-bytes value returned by CM_IOCTL_GET_FEATURE_REQUEST shall
+       be encoded in big endian as documented in PCSC v2 part 10 ch 2.2
+       page 2. The applications using this feature shall be updated (to
+       respect the PCSC specification).
+     - use ./configure --enable-twinserial to compile and install the the
+       driver for the GemPC Twin serial
+     - some minor bugs removed
+.0.1 - 22 April 2006, Ludovic Rousseau
+     - add support for Axalto Reflex USB v3, SCM Micro SDI 010, Winbond
+       Electronics W81E381 chipset, Gemplus GemPC Card, Athena ASE IIIe
+       KB USB, OmniKey CardMan 3621
+     - support Solaris (Solaris uses a different libusb)
+     - better documentation for ./configure arguments
+     - improve support of Cherry XX44 keyboard for PIN verify and change
+       (circumvent firmware bugs)
+     - do not use LTPBundleFindValueWithKey() from pcscd since this
+       function has been removed from pcscd API
+     - use -fvisibility=hidden is available to limit the number of
+       exported symbols
+.0.0 - 3 March 2006, Ludovic Rousseau
+     - add support for ActivCard USB Reader 3.0, Athena ASE IIIe USB V2,
+       SCM Micro SCR 355, SCR 3311, SCR 3320, SCR 3340 ExpressCard54,
+       Gemplus GemCore SIM Pro, GemCore POS Pro (serial and USB), GemPC
+       Express (ExpressCard/54 interface), SmartEpad (v 2.0), OmniKey
+       CardMan 5121
+     - greatly improve support of PIN PAD readers. We now support TPDU
+       readers with T=1 cards
+     - use l10n strings for the Gemplus GemPC PIN PAD (it has a screen).
+       Supported languages are: de, en, es, fr, it
+     - rename ACS ACR 38 in ACR 38U-CCID since the ACR 38 is a different
+       reader and is not CCID compatible
+     - allow to select the Power On voltage using Info.plist instead of
+       recompiling the source code
+     - correct bugs in the support of multi-slots readers
+     - if the card is faster than the reader (TA1=97 for example) we try
+       to use a not-so-bad speed (corresponding to TA1=96, 95 or 94)
+       instead of the default speed of TA1=11
+     - the src/parse tool do not use the driver anymore. No need to
+       update the Info.plist file first.
+     - some minor bugs removed
+.9.4 - 27 November 2005, Ludovic Rousseau
+     - add support for Eutron SIM Pocket Combo, Eutron CryptoIdentity,
+       Verisign Secure Token and VeriSign Secure Storage Token, GemPC
+       Card (PCMCIA), SCM SCR331-DI NTTCom, SCM Micro SCR 3310-NTTCom,
+       Cherry ST-1044U, Cherry SmartTerminal ST-2XXX
+     - add support of PC/SC v2 part 10 CM_IOCTL_GET_FEATURE_REQUEST add
+       support of FEATURE_VERIFY_PIN_DIRECT and FEATURE_MODIFY_PIN_DIRECT
+       remove support of IOCTL_SMARTCARD_VENDOR_VERIFY_PIN (now
+       obsoleted). A sample code is available in examples/scardcontrol.c
+     - we need pcsc-lite 1.2.9-beta9 since some structures used for PIN
+       pad readers are defined by pcsc-lite
+     - some (bogus) cards require an extra EGT but the ATR does not say
+       so. We try to detect the bogus cards and set TC1=2
+     - IFDHSetProtocolParameters(): only use a data rate supported by the
+       reader in the PPS negociation, otherwise we stay at the default
+       speed.
+     - calculate and store the read timeout according to the card ATR
+       instead of using a fixed value of 60 seconds
+     - increase the read timeout if the card sends and WTX request
+     - improve support of GemPC Twin and GemPC Card (serial protocol)
+     - reset the device on close only if DRIVER_OPTION_RESET_ON_CLOSE is
+       set. The problem was that a device reset also disconnects the
+       keyboard on a keyboard + reader device.
+     - use color logs
+     - some minor bugs removed
 .9.3 - 14 March 2005, Ludovic Rousseau
      - change the licence from GNU GPL to GNU Lesser GPL (LGPL)
      - add support for ACS ACR 38, Kobil KAAN Base, Kobil KAAN Advanced,
-Line 175 
 History:
+Line 458 
 History:
      - T=1 TPDU code:
        . the work on T=1 TPDU code was possible thanks to Gemplus
          validation team who helped me test, debug and bring the code to
-         an EMV validation level. Thanks to J�r�me, Jean-Yves, Xavier and
+         an EMV validation level. Thanks to Jérôme, Jean-Yves, Xavier and
          the Gemplus readers department
        . error code was not checked correctly
        . avoid a (nearly) infinite loop when resynch are needed.
-Line 285 
 History:
+Line 568 
 History:
      - move LTC31 reader from unsupported to supported reader list. It
        was my f ault since in used odd INS byte in my test applet and odd
        INS bytes are forbidden by ISO 7816-4 ch. 5.4.2 Instruction byte.
-       Thanks to Josep Mon� s Teixidor for pointing the problem.
+       Thanks to Josep Moné s Teixidor for pointing the problem.
      - src/commands.c: comment out the automatic GET RESPONSE part. I
        don't think it should be in the driver. Maybe in pcscd instead?
-Line 296 
 History:
+Line 579 
 History:
      - add --enable-libusb=PATH option is your libusb is not installed in
        /usr or /usr/local
      - honor DESTDIR in install rules (closes [ #300110 ]). Thanks to
-       Ville Skytt� for the patch.
+       Ville Skyttä for the patch.
      - src/ccid.c: do not switch the GemPC Key and GemPC Twin in APDU
        mode since it also swicth in EMV mode and may not work with non
        EMV cards
-Line 326 
 History:
+Line 609 
 History:
      - First public release
- Bibliography:
+ References:
- =============
+ ===========
  [1] http://www.usb.org/developers/devclass_docs/ccid_classspec_1_00a.pdf
- [2] http://www.gemplus.com/products/gempc433/
+ [2] http://www.gemalto.com/products/pc_usb_sl/
- [3] http://www.gemplus.com/products/gempckey/
+ [3] http://www.gemalto.com/products/usb_shell_token_v2/
- [4] http://www.gemplus.com/products/gempctwin/
+ [4] http://www.gemalto.com/products/pctwin/
- [5] http://www.omnikey.com/en/produkt_details.php3?produkt=1&variante=47
+ [5] http://www.omnikey.com/?id=products&tx_okprod_pi1[product]=21
- [6] http://www.scmmicro.com/security/SCR331.html
+ [6] http://scmmicro.com/security/view_product_en.php?PID=3
- [7] http://www.scmmicro.com/security/SCR335.html
+ [7] http://scmmicro.com/security/view_product_en.php?PID=11
  [8] http://www.c3po.es/ltc31.html
- [9] http://www.scmmicro.com/security/SPR532.html
+ [9] http://scmmicro.com/security/view_product_en.php?PID=13
  [10] http://www.activcard.com/products/usb_reader.html
  [11] http://www.scmmicro.com/security/SCR331-DI.html
  [12] http://www.silitek.com/prod/getProduct.do?xml_id=4_2&menu_id=4_2_8&cid=1_8_5
  [13] http://www.c3po.es/ltc32.html
  [14] http://www.c3po.es/tltc2usb.html
- [15] http://www.scmmicro.com/security/SCR333.html
+ [15] http://scmmicro.com/security/view_product_en.php?PID=10
- [16] http://www.acs.com.hk/Product_Readers.asp?productID=59&PCate=Products_PC_Linked_SmartCard_Readers
+ [16] http://www.acs.com.hk/Product_Readers.asp?productID=107&PCate=Products_PC_Linked_SmartCard_Readers
- [17] http://www.scmmicro.com/support/pcs_product_drivers.html
+ [17] http://www.scmmicro.com/support/pcs_downloads.php
  [18] http://www.cherrycorp.com/english/advanced-line/advanced-line_smartboard_g83-6744.htm
  [19] http://www.kobil.com/e/products/smartcard/kaan-base.php
  [20] http://www.kobil.com/e/products/smartcard/kaan-advanced.php
-Line 357 
 Bibliography:
+Line 640 
 Bibliography:
  [26] http://www.cryptoidentity.eutron.com/eng/home.asp
  [27] http://www.cherry.de/english/advanced-line/advanced_smartterminal_st-1044u.htm
  [28] http://www.ntt.com/jpki/scr3310.html
+ [29] http://www.asedrive.com/product.asp?pid=1
+ [30] http://scmmicro.com/security/view_product_en.php?PID=4
+ [31] http://scmmicro.com/security/view_product_en.php?PID=5
+ [31b] http://scmmicro.com/security/view_product_en.php?PID=6
+ [32] http://www.smartepad.com.br/
+ [33] http://www.omnikey.com/?id=products&tx_okprod_pi1[product]=37
+ [34] http://scmmicro.com/security/view_product_en.php?PID=7
+ [35] http://www.cherry.de/deutsch/advanced-line/advanced_smart_terminal_st-2000u.htm
+ [36] http://www.omnikey.com/index.php?id=products&tx_okprod_pi1[product]=29
+ [37] http://www.omnikey.com/index.php?id=products&tx_okprod_pi1[product]=33
+ [38] http://www.reflexreaders.com/Products/reflex_usbnew.html
+ [39] http://scmmicro.com/security/view_product_en.php?PID=19
+ [40] http://www.winbond.com.tw/E-WINBONDHTM/partner/b_2_e_4.htm
+ [41] http://www.gemplus.com/products/gempc_card/
+ [42] http://www.asedrive.com/product.asp?pid=2
+ [43] http://www.omnikey.com/?id=products&tx_okprod_pi1[product]=31
+ [44] http://h18000.www1.hp.com/products/quickspecs/12346_na/12346_na.HTML
+ [45] http://www.id3semiconductors.com/produits/cl1356D.htm
+ [46] http://www.alcormicro.com/products_detail.php?main_id=8&p_id=21
+ [47] http://www.tai-hao.com/english/products_detail.php?main_id=4&second_id=13&p_id=53&now_rows=1
+ [48] http://www.id3semiconductors.com/produits/cl1356T.htm
+ [49] http://www.omnikey.com/index.php?id=products&tx_okprod_pi1[product]=48
+ [50] http://www.rsasecurity.com/products/securid/datasheets/SID800_DS_0205.pdf
+ [51] http://www.omnikey.com/?id=products&tx_okprod_pi1[product]=39
+ [52] http://www.teobyxiring.com/
+ [53] http://www.fujitsu-siemens.com/solutions/business_solutions/security/security_products/smartcase_scr_usbex.html
+ [54] http://www.fujitsu-siemens.com/solutions/business_solutions/security/security_products/smartcase_kbpc_cx.html
+ [55] http://omnikey.aaitg.com/?id=products&tx_okprod_pi1[product]=50
+ [56] http://omnikey.aaitg.com/?id=products&tx_okprod_pi1[product]=41
+ [57] http://www.gi-de.com/portal/page?_pageid=42,126834&_dad=portal&_schema=PORTAL
+ [58] http://www.eutronsec.com/infosecurity/Contents/ProductLine/Details.aspx?IDProd=26&IDFamiglia=3
+ [59] http://www.eutronsec.com/infosecurity/Contents/ProductLine/Details.aspx?IDProd=62&IDFamiglia=39
+ [60] http://www.lexar.com/enterprise/ent_ppsd.html
+ [61] http://www.cherry.de/deutsch/produkte/chipkartentastaturen_g-6610.htm
+ [62] http://acs.com.hk/acr122.php
+ [63] http://covadis.ch/Alya.239.0.html
+ [64] http://covadis.ch/Vega.104.0.html
+ [65] http://www.validy.com/en/products/token/
+ [66] http://www.actividentity.com/products/activkey_usb_tokens__home.php
+ [67] http://www.gemalto.com/products/pc_pinpad/
  $Id$

 Legend:



Removed from v.1730
 


changed lines


 
Added in v.2931
 Legend:



Removed from v.1730
 


changed lines


 
Added in v.2931
-Removed from v.1730
+Added in v.2931

	ViewVC Help
Powered by ViewVC 1.1.5