po/zh_CN/boot-installer.po

# Debian GNU/Linux Installation Guide
msgid ""
msgstr ""
"Project-Id-Version: d-i-manual\n"
"Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
"POT-Creation-Date: 2006-12-25 19:53+0000\n"
"PO-Revision-Date: 2006-11-27 09:30+0800\n"
"Last-Translator: Ji YongGang<jungle@soforge.com>\n"
"Language-Team: debian-chinese-gb <debian-chinese-gb@lists.debian.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#~ msgid "Booting the Installation System"
#~ msgstr "用安装系统启动"

#~ msgid "Booting the Installer on &arch-title;"
#~ msgstr "在 &arch-title; 上引导安装程序"

#~ msgid "Alpha Console Firmware"
#~ msgstr "Alpha 控制台固件"

#~ msgid ""
#~ "Console firmware is stored in a flash ROM and started when an Alpha "
#~ "system is powered up or reset. There are two different console "
#~ "specifications used on Alpha systems, and hence two classes of console "
#~ "firmware available:"
#~ msgstr ""
#~ "控制台固件是保存在一个闪存 ROM 中并且每次在 Alpha 系统加电或者重启的时候启"
#~ "动。在 Alpha 系统上有两种规格的控制台，并且因此有两类控制台固件供使用。"

#~ msgid ""
#~ "<emphasis>SRM console</emphasis>, based on the Alpha Console Subsystem "
#~ "specification, which provides an operating environment for OpenVMS, Tru64 "
#~ "UNIX, and Linux operating systems."
#~ msgstr ""
#~ "<emphasis>SRM console</emphasis> 基于 Alpha 控制台子系统规范。它为 "
#~ "OpenVMS，Tru64 Unix，以及 Linux 操作系统提供了一个操作环境。"

#~ msgid ""
#~ "<emphasis>ARC, AlphaBIOS, or ARCSBIOS console</emphasis>, based on the "
#~ "Advanced RISC Computing (ARC) specification, which provides an operating "
#~ "environment for Windows NT."
#~ msgstr ""
#~ "<emphasis>ARC, AlphaBIOS 或 ARCSBIOS console</emphasis> 基于 Advanced "
#~ "RISC Computing (ARC) 规范。它为 Windows NT 提供了一个操作环境。"

#~ msgid ""
#~ "From the user's perspective, the most important difference between SRM "
#~ "and ARC is that the choice of console constrains the possible disk-"
#~ "partitioning scheme for the hard disk which you wish to boot off of."
#~ msgstr ""
#~ "按照用户的角度看，SRM 和 ARC 最重要的区别，是控制台的选择，可能会影响到您"
#~ "需要引导的磁盘分区方法。"

#~ msgid ""
#~ "ARC requires that you use an MS-DOS partition table (as created by "
#~ "<command>cfdisk</command>) for the boot disk. Therefore MS-DOS partition "
#~ "tables are the <quote>native</quote> partition format when booting from "
#~ "ARC. In fact, since AlphaBIOS contains a disk partitioning utility, you "
#~ "may prefer to partition your disks from the firmware menus before "
#~ "installing Linux."
#~ msgstr ""
#~ "ARC 需要您为引导磁盘使用一个 MS-DOS 分区表(用 <command>cfdisk</command> 创"
#~ "建)。因此从 ARC 引导则 MS-DOS 分区表是作为<quote>原始的</quote>分区格式 "
#~ "ARC。事实上，由于 AlphaBIOS 包含了一个磁盘分区工具，您也许可以在安装 "
#~ "Linux 时，通过固件菜单对磁盘进行分区。"

#~ msgid ""
#~ "Conversely, SRM is <emphasis>incompatible</emphasis><footnote> <para> "
#~ "Specifically, the bootsector format required by the Console Subsystem "
#~ "Specification conflicts with the placement of the DOS partition table. </"
#~ "para> </footnote> with MS-DOS partition tables. Since Tru64 Unix uses the "
#~ "BSD disklabel format, this is the <quote>native</quote> partition format "
#~ "for SRM installations."
#~ msgstr ""
#~ "保守地说，SRM 是 <emphasis>不兼容</emphasis> MS-DOS 分区表。"
#~ "<footnote><para> 具体来说，控制台子系统规范与需要的引导扇区格式和 DOS 分区"
#~ "表有冲突。</para></footnote>由于 Tru64 Unix 使用的是 BSD 磁盘标记格式，对"
#~ "于SRM 安装来说，这是一个<quote>原始的</quote>分区格式。"

#~ msgid ""
#~ "GNU/Linux is the only operating system on Alpha that can be booted from "
#~ "both console types, but &debian; &release; only supports booting on SRM-"
#~ "based systems. If you have an Alpha for which no version of SRM is "
#~ "available, if you will be dual-booting the system with Windows NT, or if "
#~ "your boot device requires ARC console support for BIOS initialization, "
#~ "you will not be able to use the &debian; &release; installer. You can "
#~ "still run &debian; &release; on such systems by using other install "
#~ "media; for instance, you can install Debian woody with MILO and upgrade."
#~ msgstr ""
#~ "由于 GNU/Linux 是唯一能够通过两种控制台格式引导的系统，这个问题就取决于您"
#~ "想在机器上面运行什么样的其他操作系统。所有的其他 Unix 型的操作系统 (Tru64 "
#~ "Unix，FreeBSD，OpenBSD，以及 NetBSD) 和 OpenVMS 只能从 SRM 上面引导，而 "
#~ "Windows NT 只能从 ARC 上面引导。"

#~ msgid ""
#~ "Because <command>MILO</command> is not available for any of the Alpha "
#~ "systems currently in production (as of February 2000), and because it is "
#~ "no longer necessary to buy an OpenVMS or Tru64 Unix license to have SRM "
#~ "firmware on your older Alpha, it is recommended that you use SRM when "
#~ "possible."
#~ msgstr ""
#~ "由于 <command>MILO</command> 在当前生产型 Alpha 系统上并没有实现(从 2000 "
#~ "年二月份开始)。并且也不需要购买一个 OpenVMS 和 Tru64 Unix 授权，来在老 "
#~ "Alpha 上装上 SRM 固件。我们推荐在新的机器上使用 SRM。"

#~ msgid ""
#~ "The following table summarizes available and supported system type/"
#~ "console combinations (see <xref linkend=\"alpha-cpus\"/> for the system "
#~ "type names). The word <quote>ARC</quote> below denotes any of the ARC-"
#~ "compliant consoles."
#~ msgstr ""
#~ "下面表格总结了可用以及支持的系统类型/控制台组合(系统类型名称参见 <xref "
#~ "linkend=\"alpha-cpus\"/>)。单词 <quote>ARC</quote> 注明任何和 ARC 兼容的控"
#~ "制台。"

#~ msgid "System Type"
#~ msgstr "系统类型"

#~ msgid "Console Type Supported"
#~ msgstr "支持的控制台类型"

#~ msgid "alcor"
#~ msgstr "alcor"

# index.docbook:110, index.docbook:113, index.docbook:119, index.docbook:125, index.docbook:128, index.docbook:131, index.docbook:134, index.docbook:140, index.docbook:143, index.docbook:146, index.docbook:155, index.docbook:164, index.docbook:179, index.docbook:182, index.docbook:188
#~ msgid "ARC or SRM"
#~ msgstr "ARC or SRM"

#~ msgid "avanti"
#~ msgstr "avanti"

#~ msgid "book1"
#~ msgstr "book1"

# index.docbook:116, index.docbook:122, index.docbook:137, index.docbook:149, index.docbook:158, index.docbook:161, index.docbook:167, index.docbook:173, index.docbook:176
#~ msgid "SRM only"
#~ msgstr "SRM only"

#~ msgid "cabriolet"
#~ msgstr "cabriolet"

#~ msgid "dp264"
#~ msgstr "dp264"

#~ msgid "eb164"
#~ msgstr "eb164"

#~ msgid "eb64p"
#~ msgstr "eb64p"

#~ msgid "eb66"
#~ msgstr "eb66"

#~ msgid "eb66p"
#~ msgstr "eb66p"

#~ msgid "jensen"
#~ msgstr "jensen"

#~ msgid "lx164"
#~ msgstr "lx164"

#~ msgid "miata"
#~ msgstr "miata"

#~ msgid "mikasa"
#~ msgstr "mikasa"

#~ msgid "mikasa-p"
#~ msgstr "mikasa-p"

#~ msgid "nautilus"
#~ msgstr "nautilus"

#~ msgid "ARC (see motherboard manual) or SRM"
#~ msgstr "ARC (see motherboard manual) or SRM"

#~ msgid "noname"
#~ msgstr "noname"

#~ msgid "noritake"
#~ msgstr "noritake"

#~ msgid "noritake-p"
#~ msgstr "noritake-p"

#~ msgid "pc164"
#~ msgstr "pc164"

#~ msgid "rawhide"
#~ msgstr "rawhide"

#~ msgid "ruffian"
#~ msgstr "ruffian"

# index.docbook:170, index.docbook:185
#~ msgid "ARC only"
#~ msgstr "ARC only"

#~ msgid "sable"
#~ msgstr "sable"

#~ msgid "sable-g"
#~ msgstr "sable-g"

#~ msgid "sx164"
#~ msgstr "sx164"

#~ msgid "takara"
#~ msgstr "takara"

#~ msgid "<entry>xl</entry>"
#~ msgstr "<entry>xl</entry>"

#~ msgid "<entry>xlt</entry>"
#~ msgstr "<entry>xlt</entry>"

#~ msgid ""
#~ "Generally, none of these consoles can boot Linux directly, so the "
#~ "assistance of an intermediary bootloader is required. For the SRM "
#~ "console, <command>aboot</command>, a small, platform-independent "
#~ "bootloader, is used. See the (unfortunately outdated) <ulink url=\"&url-"
#~ "srm-howto;\">SRM HOWTO</ulink> for more information on <command>aboot</"
#~ "command>."
#~ msgstr ""
#~ "一般来说，这些控制台都不能直接引导 Linux ，因此需要一个中间引导装载程序。"
#~ "对于 SRM 控制台，<command>aboot</command>，小型的，平台独立的引导装载器。"
#~ "参见(抱歉的是它也有点过时了)<ulink url=\"&url-srm-howto;\">SRM HOWTO</"
#~ "ulink> 来获得更多有关信息 <command>aboot</command>。"

#~ msgid ""
#~ "The following paragraphs are from the woody install manual, and are "
#~ "included here for reference; they may be useful to someone at a later "
#~ "date when Debian supports MILO-based installs again."
#~ msgstr ""
#~ "以下章节来自 woody 安装手册，放在这里作为参考；如果以后 Debian 再支持基于 "
#~ "MILO 的安装，它们对某些人或许有用。"

#~ msgid ""
#~ "Generally, none of these consoles can boot Linux directly, so the "
#~ "assistance of an intermediary bootloader is required. There are two "
#~ "mainstream Linux loaders: <command>MILO</command> and <command>aboot</"
#~ "command>."
#~ msgstr ""
#~ "一般来说，这些控制台都不能直接引导 Linux，因此需要一个中间引导装载程序。这"
#~ "里有两个主要的 Linux 装载程序： <command>MILO</command> 和 "
#~ "<command>aboot</command>。"

#~ msgid ""
#~ "<command>MILO</command> is itself a console, which replaces ARC or SRM in "
#~ "memory. <command>MILO</command> can be booted from both ARC and SRM and "
#~ "is the only way to bootstrap Linux from the ARC console. <command>MILO</"
#~ "command> is platform-specific (a different <command>MILO</command> is "
#~ "needed for each system type) and exist only for those systems, for which "
#~ "ARC support is shown in the table above. See also the (unfortunately "
#~ "outdated) <ulink url=\"&url-milo-howto;\">MILO HOWTO</ulink>."
#~ msgstr ""
#~ "<command>MILO</command> 自己本身是一个用来替换载入内存中的 ARC 和 SRM 的控"
#~ "制台。<command>MILO</command> 能够同时从 ARC 和 SRM 引导并且是唯一一种方法"
#~ "从 ARC 控制台引导 Linux。<command>MILO</command> 取决与具体的平台。(对于每"
#~ "种不同的系统类型需要不同的 <command>MILO</command> 并且只适合这些系统。参"
#~ "见(很遗憾有点过时)<ulink url=\"&url-milo-howto;\">MILO HOWTO</ulink>。"

#~ msgid ""
#~ "<command>aboot</command> is a small, platform-independent bootloader, "
#~ "which runs from SRM only. See the (also unfortunately outdated) <ulink "
#~ "url=\"&url-srm-howto;\">SRM HOWTO</ulink> for more information on "
#~ "<command>aboot</command>."
#~ msgstr ""
#~ "<command>aboot</command> 是一个小型的，平台独立的引导装载器，不过只运行与 "
#~ "SRM 上。参见 (抱歉的是它也有点过时了 ) <ulink url=\"&url-srm-howto;\">SRM "
#~ "HOWTO</ulink>来获得更多有关信息 <command>aboot</command>。"

#~ msgid ""
#~ "Thus, three scenarios are generally possible, depending on the system's "
#~ "console firmware and whether or not <command>MILO</command> is available: "
#~ "<informalexample><screen>\n"
#~ "SRM -&gt; aboot\n"
#~ "SRM -&gt; MILO\n"
#~ "ARC -&gt; MILO\n"
#~ "</screen></informalexample> Because <command>MILO</command> is not "
#~ "available for any of the Alpha systems currently in production (as of "
#~ "February 2000), and because it is no longer necessary to buy an OpenVMS "
#~ "or Tru64 Unix license to have SRM firmware on your older Alpha, it is "
#~ "recommended that you use SRM and <command>aboot</command> on new "
#~ "installations of GNU/Linux, unless you wish to dual-boot with Windows NT."
#~ msgstr ""
#~ "因此，三种方案都是可行的，取决与系统控制台固件以及是否有相应的 "
#~ "<command>MILO</command> ： <informalexample><screen>\n"
#~ "SRM -&gt; aboot\n"
#~ "SRM -&gt; MILO\n"
#~ "ARC -&gt; MILO\n"
#~ "</screen></informalexample> 由于 <command>MILO</command> 在当前生产型 "
#~ "Alpha 系统上并没有实现(从 2000 年二月份开始)。并且也不需要购买一个 "
#~ "OpenVMS 和 Tru64 Unix 授权，来在老 Alpha 上装上 SRM 固件。除非您想采用 "
#~ "Windows NT 并且进行双引导，我们推荐在新的机器上使用 SRM 和 "
#~ "<command>aboot</command> 安装 Linux。"

#~ msgid ""
#~ "The majority of AlphaServers and all current server and workstation "
#~ "products contain both SRM and AlphaBIOS in their firmware. For "
#~ "<quote>half-flash</quote> machines such as the various evaluation boards, "
#~ "it is possible to switch from one version to another by reflashing the "
#~ "firmware. Also, once SRM is installed, it is possible to run ARC/"
#~ "AlphaBIOS from a floppy disk (using the <command>arc</command> command). "
#~ "For the reasons mentioned above, we recommend switching to SRM before "
#~ "installing &debian;."
#~ msgstr ""
#~ "大部分 AlphaServers 以及目前所有的服务器以及工作站产品固件中都同时含有 "
#~ "SRM 和 AlphaBIOS。对于具有不同开发板的 <quote>half-flash</quote> 机器来"
#~ "说。可以通过重刷固件 来从一个版本切换到另外一个版本。并且一旦 SRM 安装完"
#~ "毕，从软盘上运行 ARC/AlphaBIOS 也是可能的(使用 <command>arc</command>)。基"
#~ "于上述的理由，我们推荐在安装 &debian; 之前切换至 SRM。"

#~ msgid ""
#~ "As on other architectures, you should install the newest available "
#~ "revision of the firmware<footnote> <para> Except on Jensen, where Linux "
#~ "is not supported on firmware versions newer than 1.7 &mdash; see <ulink "
#~ "url=\"&url-jensen-howto;\"></ulink> for more information. </para> </"
#~ "footnote> before installing &debian;. For Alpha, firmware updates can be "
#~ "obtained from <ulink url=\"&url-alpha-firmware;\">Alpha Firmware Updates</"
#~ "ulink>."
#~ msgstr ""
#~ "和另外的体系结构一样，您也应该在安装 &debian; 之前安装最新版本的固件"
#~ "<footnote><para>不包括 Jensen，1.7 以上版本的固件不支持 Linux &mdash; 查"
#~ "看 <ulink url=\"&url-jensen-howto;\"></ulink> 以获得更多的信息。</para></"
#~ "footnote>。对于 Alpha 来说，固件升级可以通过 <ulink url=\"&url-alpha-"
#~ "firmware;\">Alpha Firmware Updates</ulink>取得。"

# index.docbook:274, index.docbook:780, index.docbook:1320, index.docbook:1813, index.docbook:1896, index.docbook:2236, index.docbook:2332
#~ msgid "Booting with TFTP"
#~ msgstr "用 TFTP 引导"

#~ msgid ""
#~ "In SRM, Ethernet interfaces are named with the <userinput>ewa</userinput> "
#~ "prefix, and will be listed in the output of the <userinput>show dev</"
#~ "userinput> command, like this (edited slightly): "
#~ "<informalexample><screen>\n"
#~ "&gt;&gt;&gt; show dev\n"
#~ "ewa0.0.0.9.0               EWA0              08-00-2B-86-98-65\n"
#~ "ewb0.0.0.11.0              EWB0              08-00-2B-86-98-54\n"
#~ "ewc0.0.0.2002.0            EWC0              00-06-2B-01-32-B0\n"
#~ "</screen></informalexample> You first need to set the boot protocol: "
#~ "<informalexample><screen>\n"
#~ "&gt;&gt;&gt; set ewa0_protocols bootp\n"
#~ "</screen></informalexample> Then check the medium type is correct: "
#~ "<informalexample><screen>\n"
#~ "&gt;&gt;&gt; set ewa0_mode <replaceable>mode</replaceable>\n"
#~ "</screen></informalexample> You can get a listing of valid modes with "
#~ "<userinput>&gt;&gt;&gt;set ewa0_mode</userinput>."
#~ msgstr ""
#~ "在 SRM 上，以太网界面名字带有 <userinput>ewa</userinput> 前缀，并可以用 "
#~ "<userinput>show dev</userinput> 命令列出，类似如下显示(可能有一点不同)： "
#~ "<informalexample><screen>\n"
#~ "&gt;&gt;&gt; show dev\n"
#~ "ewa0.0.0.9.0               EWA0              08-00-2B-86-98-65\n"
#~ "ewb0.0.0.11.0              EWB0              08-00-2B-86-98-54\n"
#~ "ewc0.0.0.2002.0            EWC0              00-06-2B-01-32-B0\n"
#~ "</screen></informalexample> 您首先需要设置引导协议： "
#~ "<informalexample><screen>\n"
#~ "&gt;&gt;&gt; set ewa0_protocol bootp\n"
#~ "</screen></informalexample> 然后检查媒介类型是否正确： "
#~ "<informalexample><screen>\n"
#~ "&gt;&gt;&gt; set ewa0_mode <replaceable>mode</replaceable>\n"
#~ "</screen></informalexample> 获得一个有效模式的列表 <userinput>&gt;&gt;&gt;"
#~ "set ewa0_mode</userinput>。"

#~ msgid ""
#~ "Then, to boot from the first Ethernet interface, you would type: "
#~ "<informalexample><screen>\n"
#~ "&gt;&gt;&gt; boot ewa0 -flags \"\"\n"
#~ "</screen></informalexample> This will boot using the default kernel "
#~ "parameters as included in the netboot image."
#~ msgstr ""
#~ "接下来，如果从第一个以太网界面引导，您需要输入： "
#~ "<informalexample><screen>\n"
#~ "&gt;&gt;&gt; boot ewa0 -flags \"\"\n"
#~ "</screen></informalexample> 这将 netboot 映象启动，并使用默认的内核参数。"

#~ msgid ""
#~ "If you wish to use a serial console, you <emphasis>must</emphasis> pass "
#~ "the <userinput>console=</userinput> parameter to the kernel. This can be "
#~ "done using the <userinput>-flags</userinput> argument to the SRM "
#~ "<userinput>boot</userinput> command. The serial ports are named the same "
#~ "as their corresponding files in <userinput>/dev</userinput>. Also, when "
#~ "specifying additional kernel parameters, you must repeat certain default "
#~ "options that are needed by the &d-i; images. For example, to boot from "
#~ "<userinput>ewa0</userinput> and use a console on the first serial port, "
#~ "you would type:"
#~ msgstr ""
#~ "如果希望使用一个串行控制台，您 <emphasis>必须</emphasis> 给内核传递 "
#~ "<userinput>console=</userinput> 参数。这个工作可以使用附带 <userinput>-"
#~ "flags</userinput> 参数的 SRM <userinput>boot</userinput> 命令来完成。串口"
#~ "号的命名和它们在目录 <userinput>/dev</userinput> 中相同。另外，如有指定额"
#~ "外的内核参数，也必须给 &d-i; 映象重复指定。比如，如果需要从 "
#~ "<userinput>ewa0</userinput> 引导，并且在第一个串口使用控制台，您需要输入："

#~ msgid ""
#~ "&gt;&gt;&gt; boot ewa0 -flags &quot;root=/dev/ram ramdisk_size=16384 "
#~ "console=ttyS0&quot;"
#~ msgstr ""
#~ "&gt;&gt;&gt; boot ewa0 -flags &quot;root=/dev/ram ramdisk_size=16384 "
#~ "console=ttyS0&quot;"

#~ msgid "Booting from CD-ROM with the SRM Console"
#~ msgstr "采用 SRM 控制台来从 CD 光盘上引导"

#~ msgid ""
#~ "Type <informalexample><screen>\n"
#~ "&gt;&gt;&gt; boot xxxx -flags 0\n"
#~ "</screen></informalexample> where <replaceable>xxxx</replaceable> is your "
#~ "CD-ROM drive in SRM notation."
#~ msgstr ""
#~ "输入 <informalexample><screen>\n"
#~ "&gt;&gt;&gt; boot xxxx -flags 0\n"
#~ "</screen></informalexample> 这里 <replaceable>xxxx</replaceable> 是您的光"
#~ "盘驱动器在 SRM 的符号。"

#~ msgid "Booting from CD-ROM with the ARC or AlphaBIOS Console"
#~ msgstr "通过 ARC 或者 AlphaBIOS 控制台来从 CD 光盘上启动"

#~ msgid ""
#~ "To boot a CD-ROM from the ARC console, find your sub-architecture code "
#~ "name (see <xref linkend=\"alpha-cpus\"/>), then enter <filename>\\milo"
#~ "\\linload.exe</filename> as the boot loader and <filename>\\milo"
#~ "\\<replaceable>subarch</replaceable></filename> (where "
#~ "<replaceable>subarch</replaceable> is the proper subarchitecture name) as "
#~ "the OS Path in the `OS Selection Setup' menu. Ruffians make an exception: "
#~ "You need to use <filename>\\milo\\ldmilo.exe</filename> as boot loader."
#~ msgstr ""
#~ "为了从 ARC 控制台引导 CD 光盘，找出您的子体系结构代码名称(参见 <xref "
#~ "linkend=\"alpha-cpus\"/>)，然后输入 <filename>\\milo\\linload.exe</"
#~ "filename> 作为引导装载器并且在 `OS Selection Setup' 菜单下选择 <filename>"
#~ "\\milo\\<replaceable>subarch</replaceable></filename> (这里 "
#~ "<replaceable>subarch</replaceable> 是相应的子体系结构名称)作为操作系统路"
#~ "径。Ruffians 则是一个例外：您需要使用 <filename>\\milo\\ldmilo.exe</"
#~ "filename> 作为引导装载器。"

#~ msgid "Booting from Floppies with the SRM Console"
#~ msgstr "通过 SRM 控制台从软盘引导"

#~ msgid ""
#~ "At the SRM prompt (<prompt>&gt;&gt;&gt;</prompt>), issue the following "
#~ "command: <informalexample><screen>\n"
#~ "&gt;&gt;&gt; boot dva0 -flags 0\n"
#~ "</screen></informalexample> possibly replacing <filename>dva0</filename> "
#~ "with the actual device name. Usually, <filename>dva0</filename> is the "
#~ "floppy; type <informalexample><screen>\n"
#~ "&gt;&gt;&gt; show dev\n"
#~ "</screen></informalexample> to see the list of devices (e.g., if you want "
#~ "to boot from a CD). Note that if you are booting via MILO, <command>-"
#~ "flags</command> argument is ignored, so you can just type <command>boot "
#~ "dva0</command>. If everything works OK, you will eventually see the Linux "
#~ "kernel boot."
#~ msgstr ""
#~ "在 SRM 提示符下 (<prompt>&gt;&gt;&gt;</prompt>)，使用如下命令： "
#~ "<informalexample><screen>\n"
#~ "&gt;&gt;&gt; boot dva0 -flags 0\n"
#~ "</screen></informalexample> 可以用实际的设备名称来替换 <filename>dva0</"
#~ "filename>。通常情况下，<filename>dva0</filename> 是软盘；输入 "
#~ "<informalexample><screen>\n"
#~ "&gt;&gt;&gt; show dev\n"
#~ "</screen></informalexample> 来查看设备列表(比如，如果您想从一张 CD 上面引"
#~ "导)。注意如果您想通过 MILO 引导 <command>-flags</command> 参数将被忽略，因"
#~ "此您可以只需输入 <command>boot dva0</command>。如果上面步骤工作正常，您将"
#~ "最终看到 Linux 内核引导。"

#~ msgid ""
#~ "If you want to specify kernel parameters when booting via <command>aboot</"
#~ "command>, use the following command: <informalexample><screen>\n"
#~ "&gt;&gt;&gt; boot dva0 -file linux.bin.gz -flags \"root=/dev/fd0 "
#~ "load_ramdisk=1 arguments\"\n"
#~ "</screen></informalexample> (typed on one line), substituting, if "
#~ "necessary, the actual SRM boot device name for <filename>dva0</filename>, "
#~ "the Linux boot device name for <filename>fd0</filename>, and the desired "
#~ "kernel parameters for <filename>arguments</filename>."
#~ msgstr ""
#~ "如果您想在通过 <command>aboot</command> 引导的时候指定特定的内核参数，请使"
#~ "用如下命令： <informalexample><screen>\n"
#~ "&gt;&gt;&gt; boot dva0 -file linux.bin.gz -flags \"root=/dev/fd0 "
#~ "load_ramdisk=1 arguments\"\n"
#~ "</screen></informalexample> (输入到一行)，如果需要，替换 <filename>dva0</"
#~ "filename> 的真实 SRM 引导设备名 <filename>dva0</filename>，<filename>fd0</"
#~ "filename> 的 Linux 引导设备名，<filename>arguments</filename> 需要的内核参"
#~ "数。"

#~ msgid ""
#~ "If you want to specify kernel parameters when booting via <command>MILO</"
#~ "command>, you will have to interrupt bootstrap once you get into MILO. "
#~ "See <xref linkend=\"booting-from-milo\"/>."
#~ msgstr ""
#~ "如果您想在通过 <command>MILO</command> 启动时指定内核参数，您必须在进入 "
#~ "MILO 时中断引导。参阅 <xref linkend=\"booting-from-milo\"/>。"

#~ msgid "Booting from Floppies with the ARC or AlphaBIOS Console"
#~ msgstr "在 ARC 或者 AlphaBISO 控制台下从软盘引导"

#~ msgid ""
#~ "In the OS Selection menu, set <command>linload.exe</command> as the boot "
#~ "loader, and <command>milo</command> as the OS Path. Bootstrap using the "
#~ "newly created entry."
#~ msgstr ""
#~ "在操作系统选择菜单内，设置 <command>linload.exe</command> 作为引导装载器，"
#~ "并且 <command>milo</command> 作为操作系统参数。然后使用这个最近建立的选项"
#~ "启动。"

#~ msgid "Booting with MILO"
#~ msgstr "采用 MILO 引导"

#~ msgid ""
#~ "MILO contained on the bootstrap media is configured to proceed straight "
#~ "to Linux automatically. Should you wish to intervene, all you need is to "
#~ "press space during MILO countdown."
#~ msgstr ""
#~ "自我启动介质上的 MILO 会自动直接进入 Linux 引导过程。如果您要对此有所控"
#~ "制，只需要在 MILO 倒计时时按下空格键。"

#~ msgid ""
#~ "If you want to specify all the bits explicitly (for example, to supply "
#~ "additional parameters), you can use a command like this: "
#~ "<informalexample><screen>\n"
#~ "MILO> boot fd0:linux.bin.gz root=/dev/fd0 load_ramdisk=1 <!-- arguments --"
#~ ">\n"
#~ "</screen></informalexample> If you are booting from something other than "
#~ "a floppy, substitute <filename>fd0</filename> in the above example with "
#~ "the appropriate device name in Linux notation. The <command>help</"
#~ "command> command would give you a brief MILO command reference."
#~ msgstr ""
#~ "如果您想显式指定所有的位(比如，支持附加的参数)，您可以使用像下面形式的命"
#~ "令： <informalexample><screen>\n"
#~ "MILO> boot fd0:linux.bin.gz root=/dev/fd0 load_ramdisk=1 <!-- arguments --"
#~ ">\n"
#~ "</screen></informalexample> 如果通过软盘之外别的方法引导，在 Linux 标记下"
#~ "把上面例子中的 <filename>fd0</filename> 替换成合适的设备名称。"
#~ "<command>help</command> 命令将给出一个简单的 MILO 命令参考。"

#~ msgid "Booting from TFTP"
#~ msgstr "从 TFTP 引导"

# index.docbook:432, index.docbook:786, index.docbook:1338, index.docbook:1819, index.docbook:2242, index.docbook:2338
#~ msgid ""
#~ "Booting from the network requires that you have a network connection and "
#~ "a TFTP network boot server (DHCP, RARP, or BOOTP)."
#~ msgstr ""
#~ "从网络引导需要您已经具备网络的连接和一台 TFTP 网络引导服务器(DHCP, RARP 以"
#~ "及 BOOTP)。"

# index.docbook:437, index.docbook:791, index.docbook:1343, index.docbook:1824, index.docbook:2247, index.docbook:2343
#~ msgid ""
#~ "Older systems such as the 715 might require the use of an RBOOT server "
#~ "instead of a BOOTP server."
#~ msgstr ""
#~ "较早的系统比如 715 也许需要使用一台 RBOOT 服务器来取代 BOOTP 服务器。"

# index.docbook:442, index.docbook:796, index.docbook:1348, index.docbook:1829, index.docbook:2252, index.docbook:2348
#~ msgid ""
#~ "The installation method to support network booting is described in <xref "
#~ "linkend=\"install-tftp\"/>."
#~ msgstr "支持的网络引导安装方法在 <xref linkend=\"install-tftp\"/>。"

#~ msgid "Booting from TFTP on Netwinder"
#~ msgstr "从 Netwinder 上的 TFTP 上引导"

#~ msgid ""
#~ "Netwinders have two network interfaces: A 10Mbps NE2000-compatible card "
#~ "(which is generally referred to as <literal>eth0</literal>) and a 100Mbps "
#~ "Tulip card. There may be problems loading the image via TFTP using the "
#~ "100Mbps card so it is recommended that you use the 10Mbps interface (the "
#~ "one labeled with <literal>10 Base-T</literal>)."
#~ msgstr ""
#~ "Netwinder 有两个网络接口：一个 10Mbps NE2000 兼容卡 (通常作为 "
#~ "<literal>eth0</literal>) 和一个 100Mbps Tulip 卡。使用 100Mbps 卡通过 "
#~ "TFTP 加载映像可能会出现问题，所以建议使用 10Mbps 的接口 (标记为 "
#~ "<literal>10 Base-T</literal>)。"

#~ msgid ""
#~ "You need NeTTrom 2.2.1 or later to boot the installation system, and "
#~ "version 2.3.3 is recommended. Unfortunately, firmware files are currently "
#~ "not available for download because of license issues. If this situation "
#~ "changes, you may find new images at <ulink url=\"http//www.netwinder.org/"
#~ "\"></ulink>."
#~ msgstr ""
#~ "您需要 NeTTrom 2.2.1 或者较高的版本来引导安装系统，推荐使用 NeTTrom "
#~ "2.3.3。不幸的是，由于许可证的原因，固件的文件现在无法下载。如果情况有所改"
#~ "变，您可以从 <ulink url=\"http://www.netwinder.org/\"></ulink>找到新映像。"

#~ msgid ""
#~ "When you boot your Netwinder you have to interrupt the boot process "
#~ "during the countdown. This allows you to set a number of firmware "
#~ "settings needed in order to boot the installer. First of all, start by "
#~ "loading the default settings: <informalexample><screen>\n"
#~ "    NeTTrom command-&gt; load-defaults\n"
#~ "</screen></informalexample> Furthermore, you must configure the network, "
#~ "either with a static address: <informalexample><screen>\n"
#~ "    NeTTrom command-&gt; setenv netconfig_eth0 flash\n"
#~ "    NeTTrom command-&gt; setenv eth0_ip 192.168.0.10/24\n"
#~ "</screen></informalexample> where 24 is the number of set bits in the "
#~ "netmask, or a dynamic address: <informalexample><screen>\n"
#~ "    NeTTrom command-&gt; setenv netconfig_eth0 dhcp\n"
#~ "</screen></informalexample> You may also need to configure the "
#~ "<userinput>route1</userinput> settings if the TFTP server is not on the "
#~ "local subnet. Following these settings, you have to specify the TFTP "
#~ "server and the location of the image. You can then store your settings to "
#~ "flash. <informalexample><screen>\n"
#~ "    NeTTrom command-&gt; setenv kerntftpserver 192.168.0.1\n"
#~ "    NeTTrom command-&gt; setenv kerntftpfile boot.img\n"
#~ "    NeTTrom command-&gt; save-all\n"
#~ "</screen></informalexample> Now you have to tell the firmware that the "
#~ "TFTP image should be booted: <informalexample><screen>\n"
#~ "    NeTTrom command-&gt; setenv kernconfig tftp\n"
#~ "    NeTTrom command-&gt; setenv rootdev /dev/ram\n"
#~ "</screen></informalexample> If you use a serial console to install your "
#~ "Netwinder, you need to add the following setting: "
#~ "<informalexample><screen>\n"
#~ "    NeTTrom command-&gt; setenv cmdappend root=/dev/ram "
#~ "console=ttyS0,115200\n"
#~ "</screen></informalexample> Alternatively, for installations using a "
#~ "keyboard and monitor you have to set: <informalexample><screen>\n"
#~ "    NeTTrom command-&gt; setenv cmdappend root=/dev/ram\n"
#~ "</screen></informalexample> You can use the <command>printenv</command> "
#~ "command to review your environment settings. After you have verified that "
#~ "the settings are correct, you can load the image: "
#~ "<informalexample><screen>\n"
#~ "    NeTTrom command-&gt; boot\n"
#~ "</screen></informalexample> In case you run into any problems, a <ulink "
#~ "url=\"http://www.netwinder.org/howto/Firmware-HOWTO.html\">detailed "
#~ "HOWTO</ulink> is available."
#~ msgstr ""
#~ "启动 Netwinder 时，您必须在倒数时中断引导过程。这让您可以进行一些固件的设"
#~ "置用于启动安装程序。首先，加载默认设置：<informalexample><screen>\n"
#~ "    NeTTrom command-&gt; load-defaults\n"
#~ "</screen></informalexample> 接着，您必须配置网络，可以是一个静态地址："
#~ "<informalexample><screen>\n"
#~ "    NeTTrom command-&gt; setenv netconfig_eth0 flash\n"
#~ "    NeTTrom command-&gt; setenv eth0_ip 192.168.0.10/24\n"
#~ "</screen></informalexample> 其中 24 是网络掩码位数，或者是一个动态地址："
#~ "<informalexample><screen>\n"
#~ "    NeTTrom command-&gt; setenv netconfig_eth0 dhcp\n"
#~ "</screen></informalexample> 如果 TFTP 服务器不在子网内，您还必须配置 "
#~ "<userinput>route1</userinput> 设置。下面的设置，要指定 TFTP 服务器和映像的"
#~ "位置。您可以将设置保存到 U 盘里。<informalexample><screen>\n"
#~ "    NeTTrom command-&gt; setenv kerntftpserver 192.168.0.1\n"
#~ "    NeTTrom command-&gt; setenv kerntftpfile boot.img\n"
#~ "    NeTTrom command-&gt; save-all\n"
#~ "</screen></informalexample> 现在您要告诉固件将要引导的 TFTP 映像："
#~ "<informalexample><screen>\n"
#~ "    NeTTrom command-&gt; setenv kernconfig tftp\n"
#~ "    NeTTrom command-&gt; setenv rootdev /dev/ram\n"
#~ "</screen></informalexample> 如果您通过串口控制台安装 Netwinder，需要加入下"
#~ "面设置：<informalexample><screen>\n"
#~ "    NeTTrom command-&gt; setenv cmdappend root=/dev/ram "
#~ "console=ttyS0,115200\n"
#~ "</screen></informalexample> 另外，对于安装时使用的键盘和监视器需要设置："
#~ "<informalexample><screen>\n"
#~ "    NeTTrom command-&gt; setenv cmdappend root=/dev/ram\n"
#~ "</screen></informalexample> 您可以使用 <command>printenv</command> 命令回"
#~ "顾环境设置。在确认设置正确之后，您可以加载映像："
#~ "<informalexample><screen>\n"
#~ "    NeTTrom command-&gt; boot\n"
#~ "</screen></informalexample> 万一您遇到问题，有一个 <ulink url=\"http://"
#~ "www.netwinder.org/howto/Firmware-HOWTO.html\">detailed HOWTO</ulink> 可以"
#~ "參考。"

#~ msgid "Booting from TFTP on CATS"
#~ msgstr "在 CATS 上的 TFTP 引导"

#~ msgid ""
#~ "On CATS machines, use <command>boot de0:</command> or similar at the "
#~ "Cyclone prompt."
#~ msgstr ""
#~ "在 CATS 机器上，可以使用命令 <command>boot de0:</command> 或者在 Cyclone "
#~ "引导符下类似的命令。"

#~ msgid "Booting from CD-ROM"
#~ msgstr "从 CD 光盘上引导"

# index.docbook:531, index.docbook:584, index.docbook:957, index.docbook:1776, index.docbook:2024, index.docbook:2378
#~ msgid ""
#~ "The easiest route for most people will be to use a set of Debian CDs. If "
#~ "you have a CD set, and if your machine supports booting directly off the "
#~ "CD, great! Simply <phrase arch=\"x86\"> configure your system for booting "
#~ "off a CD as described in <xref linkend=\"boot-dev-select\"/>, </phrase> "
#~ "insert your CD, reboot, and proceed to the next chapter."
#~ msgstr ""
#~ "对于大多数人来说，最快的途径是使用一套 Debian CD 光盘套件。如果您有此套"
#~ "件，并且如果您的机器支持直接 CD 引导，太棒了！只需要<phrase arch=\"x86\">"
#~ "配置您的系统可以用 CD 启动，参见 <xref linkend=\"boot-dev-select\"/>, </"
#~ "phrase>插入您的 CD，重启，然后继续下一章。"

# index.docbook:542, index.docbook:595, index.docbook:968, index.docbook:1787, index.docbook:2035, index.docbook:2389
#~ msgid ""
#~ "Note that certain CD drives may require special drivers, and thus be "
#~ "inaccessible in the early installation stages. If it turns out the "
#~ "standard way of booting off a CD doesn't work for your hardware, revisit "
#~ "this chapter and read about alternate kernels and installation methods "
#~ "which may work for you."
#~ msgstr ""
#~ "注意某些特定的 CD 驱动器需要一些特殊的驱动程序，由此他们可能在安装的早期不"
#~ "能被访问。如果标准的从 CD 引导的方法不能用于您的硬件，阅读本章中关于其他种"
#~ "类的内核以及安装方法，它们有可能能解决问题。"

# index.docbook:550, index.docbook:603, index.docbook:976, index.docbook:1795, index.docbook:2043, index.docbook:2397
#~ msgid ""
#~ "Even if you cannot boot from CD-ROM, you can probably install the Debian "
#~ "system components and any packages you want from CD-ROM. Simply boot "
#~ "using a different media, such as floppies. When it's time to install the "
#~ "operating system, base system, and any additional packages, point the "
#~ "installation system at the CD-ROM drive."
#~ msgstr ""
#~ "即便您不能从 CD 光盘引导，依然可以安装 CD 光盘上面的 Debian 系统组件和所有"
#~ "软件包。只需要使用不同的媒介，比如软盘引导系统。当安装操作系统，基础系统和"
#~ "任意附加的软件包时只需指向安装系统至光盘驱动器即可。"

# index.docbook:558, index.docbook:611, index.docbook:984, index.docbook:1803, index.docbook:2051, index.docbook:2405
#~ msgid ""
#~ "If you have problems booting, see <xref linkend=\"boot-troubleshooting\"/"
#~ ">."
#~ msgstr ""
#~ "如果您遇到引导方面的问题，请参见 <xref linkend=\"boot-troubleshooting\"/"
#~ ">。"

#~ msgid ""
#~ "To boot a CD-ROM from the Cyclone console prompt, use the command "
#~ "<command>boot cd0:cats.bin</command>"
#~ msgstr ""
#~ "如果需要在 Cyclone 控制台提示符下从 CD 光盘下引导，请使用命令 "
#~ "<command>boot cd0:cats.bin</command>"

#~ msgid "Booting from Firmware"
#~ msgstr "从固件引导"

#~ msgid ""
#~ "There is an increasing number of consumer devices that directly boot from "
#~ "a flash chip on the device. The installer can be written to flash so it "
#~ "will automatically start when you reboot your machines."
#~ msgstr ""
#~ "有越来越多的消费设备可以直接从设备上的闪存启动。安装程序可以被写入闪存，这"
#~ "样当您重启机器的时候就能自动运行。"

#~ msgid ""
#~ "In many cases, changing the firmware of an embedded device voids your "
#~ "warranty. Sometimes you are also not able to recover your device if there "
#~ "are problems during the flashing process. Therefore, please take care and "
#~ "follow the steps precisely."
#~ msgstr ""
#~ "多数情况下，修改嵌入设备的固件将使质保作废。有时如果稍有差错，您将无法复原"
#~ "您的设备。所以要特别小心并精确地进行下面的步骤。"

#~ msgid "Booting the NSLU2"
#~ msgstr "引导 NSLU2"

#~ msgid "There are three ways how to put the installer firmware into flash:"
#~ msgstr "有三种方式可以将安装程序的固件放入闪存："

#~ msgid "Using the NSLU2 web interface"
#~ msgstr "使用 NSLU2 的 web 界面"

#~ msgid ""
#~ "Go to the administration section and choose the menu item "
#~ "<literal>Upgrade</literal>. You can then browse your disk for the "
#~ "installer image you have previously downloaded. Then press the "
#~ "<literal>Start Upgrade</literal> button, confirm, wait for a few minutes "
#~ "and confirm again. The system will then boot straight into the installer."
#~ msgstr ""
#~ "进入管理部分然后选择菜单项 <literal>Upgrade</literal>。接着从您的磁盘上找"
#~ "到前面下载安装程序映像。然后按下 <literal>Start Upgrade</literal> 按钮，确"
#~ "认，等几分钟再次确认。系统将直接启动进入安装程序。"

#~ msgid "Via the network using Linux/Unix"
#~ msgstr "通过网络使用 Linux/Unix"

#~ msgid ""
#~ "You can use <command>upslug2</command> from any Linux or Unix machine to "
#~ "upgrade the machine via the network. This software is packaged for "
#~ "Debian. First, you have to put your NSLU2 in upgrade mode: <orderedlist> "
#~ "<listitem><para> Disconnect any disks and/or devices from the USB ports. "
#~ "</para></listitem> <listitem><para> Power off the NSLU2 </para></"
#~ "listitem> <listitem><para> Press and hold the reset button (accessible "
#~ "through the small hole on the back just above the power input). </para></"
#~ "listitem> <listitem><para> Press and release the power button to power on "
#~ "the NSLU2. </para></listitem> <listitem><para> Wait for 10 seconds "
#~ "watching the ready/status LED. After 10 seconds it will change from amber "
#~ "to red. Immediately release the reset button. </para></listitem> "
#~ "<listitem><para> The NSLU2 ready/status LED will flash alternately red/"
#~ "green (there is a 1 second delay before the first green). The NSLU2 is "
#~ "now in upgrade mode. </para></listitem> </orderedlist> See the <ulink url="
#~ "\"http://www.nslu2-linux.org/wiki/OpenSlug/UsingTheBinary\">NSLU2-Linux "
#~ "pages</ulink> if you have problems with this. Once your NSLU2 is in "
#~ "upgrade mode, you can flash the new image: <informalexample><screen>\n"
#~ "sudo upslug2 -i di-nslu2.bin\n"
#~ "</screen></informalexample> Note that the tool also shows the MAC address "
#~ "of your NSLU2, which may come in handy to configure your DHCP server. "
#~ "After the whole image has been written and verified, the system will "
#~ "automatically reboot. Make sure you connect your USB disk again now, "
#~ "otherwise the installer won't be able to find it."
#~ msgstr ""
#~ "您可以从任一 Linux 或 Unix 机器上使用 <command>upslug2</command> 通过网络"
#~ "来升级机器。Debian 下有该软件包。首先，您必须将 NSLU2 置于升级模式： "
#~ "<orderedlist> <listitem><para> 去除所有连接在 USB 口上的磁盘和/或设备。</"
#~ "para></listitem> <listitem><para> 关闭 NSLU2 电源 </para></listitem> "
#~ "<listitem><para> 按住复位按钮 (位于后面电源输入上方的小孔)。 </para></"
#~ "listitem> <listitem><para> 按下和松开开关键打开 NSLU2。 </para></"
#~ "listitem> <listitem><para> 等待 10 秒监视就绪/状态 LED。 10 秒钟后它会从琥"
#~ "珀色变成红色。立即松开复位按钮。 </para></listitem> <listitem><para> "
#~ "NSLU2 就绪/状态 LED 将会红/绿交替闪烁 (在首次出现绿色时会有 1 秒钟的延"
#~ "迟)。NSLU2 现在处于升级模式。</para></listitem> </orderedlist> 如果您遇到"
#~ "问题，请参考 <ulink url=\"http://www.nslu2-linux.org/wiki/OpenSlug/"
#~ "UsingTheBinary\">NSLU2-Linux pages</ulink>。一旦 NSLU2 处于升级模式，您就"
#~ "可以刷人新的映像：<informalexample><screen>\n"
#~ "sudo upslug2 -i di-nslu2.bin\n"
#~ "</screen></informalexample> 注意，该工具还会显示 NSLU2 的 MAC 地址，它可以"
#~ "用来配置 DHCP 服务器。整个映像写入和检验后，系统将自动重启。确保 USB 磁盘"
#~ "再次连接，否则将无法找到安装程序。"

#~ msgid "Via the network using Windows"
#~ msgstr "通过网络使用 Windows"

#~ msgid ""
#~ "There is <ulink url=\"http://www.everbesthk.com/8-download/sercomm/"
#~ "firmware/all_router_utility.zip\">a tool</ulink> for Windows to upgrade "
#~ "the firmware via the network."
#~ msgstr ""
#~ "有一个 <ulink url=\"http://www.everbesthk.com/8-download/sercomm/firmware/"
#~ "all_router_utility.zip\">工具</ulink> 用于 Windows 通过网络升级固件。"

# index.docbook:578, index.docbook:951, index.docbook:1764, index.docbook:2018, index.docbook:2372
#~ msgid "Booting from a CD-ROM"
#~ msgstr "从 CD-ROM 启动"

#~ msgid ""
#~ "Booting from Linux Using <command>LILO</command> or <command>GRUB</"
#~ "command>"
#~ msgstr "引导 Linux 使用 <command>LILO</command> 或 <command>GRUB</command>"

#~ msgid ""
#~ "To boot the installer from hard disk, you must first download and place "
#~ "the needed files as described in <xref linkend=\"boot-drive-files\"/>."
#~ msgstr ""
#~ "为了从硬盘引导安装程序，您首先必须按照要求下载并且放置所需的文件，请参见 "
#~ "<xref linkend=\"boot-drive-files\"/>。"

#, fuzzy
#~ msgid ""
#~ "If you intend to use the hard drive only for booting and then download "
#~ "everything over the network, you should download the <filename>netboot/"
#~ "debian-installer/i386/initrd.gz</filename> file and its corresponding "
#~ "kernel <filename>netboot/debian-installer/i386/linux</filename>. This "
#~ "will allow you to repartition the hard disk from which you boot the "
#~ "installer, although you should do so with care."
#~ msgstr ""
#~ "如果您愿意只使用硬盘引导，然后从网络下载其他文件，需要下载 "
#~ "<filename>netboot/debian-installer/i386/initrd.gz</filename> 及其对应的内"
#~ "核。这将允许您重新分区您用于引导的硬盘。这里需要小心操作。"

#~ msgid ""
#~ "Alternatively, if you intend to keep an existing partition on the hard "
#~ "drive unchanged during the install, you can download the <filename>hd-"
#~ "media/initrd.gz</filename> file and its kernel, as well as copy a CD iso "
#~ "to the drive (make sure the file is named ending in <literal>.iso</"
#~ "literal>). The installer can then boot from the drive and install from "
#~ "the CD image, without needing the network."
#~ msgstr ""
#~ "或者，如果您愿意保持安装时硬盘原有分区不变，可以下载 <filename>hd-media/"
#~ "initrd.gz</filename> 文件及其内核，以及复制一个 CD 光盘 iso 文件到硬盘上"
#~ "(确保文件名结尾是<literal>.iso</literal>)。安装程序就可以无网络从硬盘引"
#~ "导，并且从 CD 映像文件上安装。"

#~ msgid ""
#~ "For <command>LILO</command>, you will need to configure two essential "
#~ "things in <filename>/etc/lilo.conf</filename>: <itemizedlist> "
#~ "<listitem><para> to load the <filename>initrd.gz</filename> installer at "
#~ "boot time; </para></listitem> <listitem><para> have the "
#~ "<filename>vmlinuz</filename> kernel use a RAM disk as its root partition. "
#~ "</para></listitem> </itemizedlist> Here is a <filename>/etc/lilo.conf</"
#~ "filename> example:"
#~ msgstr ""
#~ "如果采用 <command>LILO</command>,您需要在 <filename>/etc/lilo.conf</"
#~ "filename> 中配置两件最基本的事情: <itemizedlist> <listitem><para> 在引导时"
#~ "装入 <filename>initrd.gz</filename> 安装程序；</para></listitem> "
#~ "<listitem><para> 让 <filename>vmlinuz</filename> 内核使用一个内存虚拟磁盘"
#~ "作为它的根分区。</para></listitem> </itemizedlist> 这里是一个 <filename>/"
#~ "etc/lilo.conf</filename> 的例子："

#~ msgid ""
#~ "image=/boot/newinstall/vmlinuz\n"
#~ "       label=newinstall\n"
#~ "       initrd=/boot/newinstall/initrd.gz\n"
#~ "       root=/dev/ram0\n"
#~ "       append=\"ramdisk_size=12000\""
#~ msgstr ""
#~ "image=/boot/newinstall/vmlinuz\n"
#~ "       label=newinstall\n"
#~ "       initrd=/boot/newinstall/initrd.gz\n"
#~ "       root=/dev/ram0\n"
#~ "       append=\"ramdisk_size=12000\""

#~ msgid ""
#~ "For more details, refer to the <citerefentry><refentrytitle>initrd</"
#~ "refentrytitle> <manvolnum>4</manvolnum></citerefentry> and "
#~ "<citerefentry><refentrytitle>lilo.conf</refentrytitle> <manvolnum>5</"
#~ "manvolnum></citerefentry> man pages. Now run <userinput>lilo</userinput> "
#~ "and reboot."
#~ msgstr ""
#~ "欲获知更多细节，请参阅 <citerefentry><refentrytitle>initrd</"
#~ "refentrytitle> <manvolnum>4</manvolnum></citerefentry> 和 "
#~ "<citerefentry><refentrytitle>lilo.conf</refentrytitle> <manvolnum>5</"
#~ "manvolnum></citerefentry> man 手册。现在运行 <userinput>lilo</userinput> "
#~ "并且重新启动。"

#~ msgid ""
#~ "The procedure for <command>GRUB</command> is quite similar. Locate your "
#~ "<filename>menu.lst</filename> in the <filename>/boot/grub/</filename> "
#~ "directory (sometimes in the <filename>/boot/boot/grub/</filename>), add "
#~ "the following lines: <informalexample><screen>\n"
#~ "title  New Install\n"
#~ "kernel (hd0,0)/boot/newinstall/vmlinuz root=/dev/ram0 ramdisk_size=12000\n"
#~ "initrd (hd0,0)/boot/newinstall/initrd.gz\n"
#~ "</screen></informalexample> and reboot."
#~ msgstr ""
#~ "使用 <command>GRUB</command> 的过程也类似。在 <filename>/boot/grub/</"
#~ "filename> 目录下找到 <filename>menu.lst</filename> (有时位于 <filename>/"
#~ "boot/boot/grub/</filename>)，加入下面几行：<informalexample><screen>\n"
#~ "title  New Install\n"
#~ "kernel (hd0,0)/boot/newinstall/vmlinuz root=/dev/ram0 ramdisk_size=12000\n"
#~ "initrd (hd0,0)/boot/newinstall/initrd.gz\n"
#~ "</screen></informalexample> 然后重启。"

#~ msgid ""
#~ "Note that the value of the <userinput>ramdisk_size</userinput> may need "
#~ "to be adjusted for the size of the initrd image. From here on, there "
#~ "should be no difference between <command>GRUB</command> or <command>LILO</"
#~ "command>."
#~ msgstr ""
#~ "注意 <userinput>ramdisk_size</userinput> 的值也许需要调整至 initrd 映像的"
#~ "大小。从这里开始，没什么区别，即采用 <command>GRUB</command> 或 "
#~ "<command>LILO</command>。"

# index.docbook:700, index.docbook:2176
#~ msgid "Booting from USB Memory Stick"
#~ msgstr "从 USB 闪盘引导"

#~ msgid ""
#~ "Let's assume you have prepared everything from <xref linkend=\"boot-dev-"
#~ "select\"/> and <xref linkend=\"boot-usb-files\"/>. Now just plug your USB "
#~ "stick into some free USB connector and reboot the computer. The system "
#~ "should boot up, and you should be presented with the <prompt>boot:</"
#~ "prompt> prompt. Here you can enter optional boot arguments, or just hit "
#~ "&enterkey;."
#~ msgstr ""
#~ "假设您已经准备好了从 <xref linkend=\"boot-dev-select\"/> 到 <xref linkend="
#~ "\"boot-usb-files\"/> 的所有步骤。现在只需要插入您的 USB 盘到一个空闲的 "
#~ "USB 插槽并且重启计算机。系统应该重新引导，并且您将得到一个 <prompt>boot:</"
#~ "prompt> 提示符。这里您可以输入一些引导选项，或者只是敲击 &enterkey;。"

# index.docbook:723, index.docbook:1876, index.docbook:2278, index.docbook:2426
#~ msgid "Booting from Floppies"
#~ msgstr "从软盘引导"

# index.docbook:724, index.docbook:2286
#~ msgid ""
#~ "You will have already downloaded the floppy images you needed and created "
#~ "floppies from the images in <xref linkend=\"create-floppy\"/>."
#~ msgstr ""
#~ "您可能已经下载了所需要的软盘映像，并且根据这些映像创建了软盘 <xref "
#~ "linkend=\"create-floppy\"/>。"

#~ msgid ""
#~ "To boot from the installer boot floppy, place it in the primary floppy "
#~ "drive, shut down the system as you normally would, then turn it back on."
#~ msgstr ""
#~ "从软盘引导安装程序需要放置软盘至主软驱。按照您平时的习惯关闭系统，然后重新"
#~ "打开。"

#~ msgid ""
#~ "For installing from an LS-120 drive (ATAPI version) with a set of "
#~ "floppies, you need to specify the virtual location for the floppy device. "
#~ "This is done with the <emphasis>root=</emphasis> boot argument, giving "
#~ "the device that the ide-floppy driver maps the device to. For example, if "
#~ "your LS-120 drive is connected as the first IDE device (master) on the "
#~ "second cable, you enter <userinput>linux root=/dev/hdc</userinput> at the "
#~ "boot prompt."
#~ msgstr ""
#~ "要想在 LS-120 驱动器(ATAPI 版本)使用这些软盘，您需指定这些软盘设备的虚拟地"
#~ "址。这可以通过 <emphasis>root=</emphasis> 引导参数来指定映射的 ide-floppy "
#~ "驱动器设备名来完成。比如，您的 LS-120 驱动器连接到第二根线第一个 IDE 设备"
#~ "(master)，那么在提示符下输入 <userinput>linux root=/dev/hdc</userinput>。"

#~ msgid ""
#~ "Note that on some machines, <keycombo><keycap>Control</keycap> "
#~ "<keycap>Alt</keycap> <keycap>Delete</keycap></keycombo> does not properly "
#~ "reset the machine, so a <quote>hard</quote> reboot is recommended. If you "
#~ "are installing from an existing operating system (e.g., from a DOS box) "
#~ "you don't have a choice. Otherwise, please do a hard reboot when booting."
#~ msgstr ""
#~ "注意有些机器上，<keycombo><keycap>Control</keycap> <keycap>Alt</keycap> "
#~ "<keycap>Delete</keycap></keycombo> 不能正常地重启系统，所以推荐使用<quote>"
#~ "硬</quote>启动。如果您正从已有的操作系统上安装(比如在 DOS 系统上)您将没有"
#~ "这样的选择。在其它情况下，请在引导时使用硬重启。"

#~ msgid ""
#~ "The floppy disk will be accessed, and you should then see a screen that "
#~ "introduces the boot floppy and ends with the <prompt>boot:</prompt> "
#~ "prompt."
#~ msgstr ""
#~ "读完软盘后，您将看到屏幕上有一个有关引导软盘的介绍，并且结尾是 "
#~ "<prompt>boot:</prompt> 提示符。"

#~ msgid ""
#~ "Once you press &enterkey;, you should see the message "
#~ "<computeroutput>Loading...</computeroutput>, followed by "
#~ "<computeroutput>Uncompressing Linux...</computeroutput>, and then a "
#~ "screenfull or so of information about the hardware in your system. More "
#~ "information on this phase of the boot process can be found below in <xref "
#~ "linkend=\"kernel-msgs\"/>."
#~ msgstr ""
#~ "一旦您敲入 &enterkey;，您应该能够看到 <computeroutput>Loading...</"
#~ "computeroutput> 消息，并且接下来是 <computeroutput>Uncompressing Linux..."
#~ "</computeroutput>，然后是一些有关您系统的硬件信息。想知道更多有关这段引导"
#~ "过程的信息，可以在下面 <xref linkend=\"kernel-msgs\"/>。"

#~ msgid ""
#~ "After booting from the boot floppy, the root floppy is requested. Insert "
#~ "the root floppy and press &enterkey;, and the contents are loaded into "
#~ "memory. The installer program <command>debian-installer</command> is "
#~ "automatically launched."
#~ msgstr ""
#~ "软盘引导后需要根软盘。请插入根软盘并且输入 &enterkey;，然后其中的内容会被"
#~ "装入内存。安装程序 <command>debian-installer</command> 会自动启动。"

#~ msgid "There are various ways to do a TFTP boot on i386."
#~ msgstr "在 i386 体系上有很多方法用 TFTP 进行引导。"

#~ msgid "NIC or Motherboard that support PXE"
#~ msgstr "支持 PXE 的网卡或者主板"

#~ msgid ""
#~ "It could be that your Network Interface Card or Motherboard provides PXE "
#~ "boot functionality. This is a <trademark class=\"trade\">Intel</"
#~ "trademark> re-implementation of TFTP boot. If so you may be able to "
#~ "configure your BIOS to boot from the network."
#~ msgstr ""
#~ "您的网卡或者主板可能已经提供了 PXE 引导功能。这是一个 <trademark class="
#~ "\"trade\">Intel</trademark>TFTP 引导的实现。如果是这样，也许可以能够配置您"
#~ "的 BIOS 来用网络进行引导。"

#~ msgid "NIC with Network BootROM"
#~ msgstr "网络 BootROM 的网卡"

#~ msgid ""
#~ "It could be that your Network Interface Card provides TFTP boot "
#~ "functionality."
#~ msgstr "很有可能是您的网卡提供了 TFTP 引导功能。"

#~ msgid ""
#~ "Let us (<email>&email-debian-boot-list;</email>) know how did you manage "
#~ "it. Please refer to this document."
#~ msgstr ""
#~ "请让我们知道 (<email>&email-debian-boot-list;</email>) 您如何来操作它，并"
#~ "参阅此文档。"

#~ msgid "Etherboot"
#~ msgstr "Etherboot"

#~ msgid ""
#~ "The <ulink url=\"http://www.etherboot.org\">etherboot project</ulink> "
#~ "provides bootdiskettes and even bootroms that do a TFTPboot."
#~ msgstr ""
#~ "<ulink url=\"http://www.etherboot.org\">etherboot project</ulink> 提供了"
#~ "为 TFTP 引导所需要的引导软盘甚至是引导 ROMS 。"

# index.docbook:1943, index.docbook:2477
#~ msgid "The Boot Prompt"
#~ msgstr "引导提示"

#~ msgid ""
#~ "When the installer boots, you should be presented with a friendly "
#~ "graphical screen showing the Debian logo and the boot prompt: "
#~ "<informalexample><screen>\n"
#~ "Press F1 for help, or ENTER to boot:\n"
#~ "</screen></informalexample> At the boot prompt you can either just press "
#~ "&enterkey; to boot the installer with default options or enter a specific "
#~ "boot method and, optionally, boot parameters."
#~ msgstr ""
#~ "安装系统引导时，您应该看到友好的图形画面，显示着 Debian 标志和引导提示: "
#~ "<informalexample><screen>Press F1 for help, or ENTER to boot:</screen></"
#~ "informalexample> 您可以按 &enterkey; 键使用默认的选项引导，或者输入一个可"
#~ "选的引导参数来指定引导的方式。"

#~ msgid ""
#~ "Information on available boot methods and on boot parameters which might "
#~ "be useful can be found by pressing <keycap>F2</keycap> through "
#~ "<keycap>F8</keycap>. If you add any parameters to the boot command line, "
#~ "be sure to type the boot method (the default is <userinput>linux</"
#~ "userinput>) and a space before the first parameter (e.g., "
#~ "<userinput>linux fb=false</userinput>)."
#~ msgstr ""
#~ "使用 <keycap>F2</keycap> 至 <keycap>F8</keycap> 键，可以查看可用的引导方法"
#~ "和引导参数的信息。如果您在引导命令行上添加任何参数，确保引导方法(默认是 "
#~ "<userinput>linux</userinput>)和第一个参数之间有一个空格(例如，"
#~ "<userinput>linux fb=false</userinput>)。"

#~ msgid ""
#~ "If you are installing the system via a remote management device that "
#~ "provides a text interface to the VGA console, you may not be able to see "
#~ "the initial graphical splash screen upon booting the installer; you may "
#~ "even not see the boot prompt. Examples of these devices include the text "
#~ "console of Compaq's <quote>integrated Lights Out</quote> (iLO) and HP's "
#~ "<quote>Integrated Remote Assistant</quote> (IRA). You can blindly press "
#~ "F1<footnote> <para> In some cases these devices will require special "
#~ "escape sequences to enact this keypress, for example the IRA uses "
#~ "<keycombo> <keycap>Ctrl</keycap> <keycap>F</keycap> </keycombo>,&nbsp;"
#~ "<keycap>1</keycap>. </para> </footnote> to bypass this screen and view "
#~ "the help text. Once you are past the splash screen and at the help text "
#~ "your keystrokes will be echoed at the prompt as expected. To prevent the "
#~ "installer from using the framebuffer for the rest of the installation, "
#~ "you will also want to add <userinput>fb=false</userinput> to the boot "
#~ "prompt, as described in the help text."
#~ msgstr ""
#~ "如果您通过远程设备安装系统，而该设备在 VGA 控制台提供文本界面，您可能不会"
#~ "看到安装程序开始的图形启动画面; 甚至不会看到引导提示。像 Compaq 的 "
#~ "<quote>integrated Lights Out</quote> (iLO) 和 HP 的 <quote>Integrated "
#~ "Remote Assistant</quote> (IRA) 就是这类设备。您可以什么都看不见地按下 "
#~ "F1<footnote> <para>有些情况下这些设备特别的转义次序按键，例如 IRA 使用 "
#~ "<keycombo> <keycap>Ctrl</keycap> <keycap>F</keycap> </keycombo>,&nbsp;"
#~ "<keycap>1</keycap>。</para> </footnote> 跳过该画面切换到帮助文档。一旦通过"
#~ "启动画面，在帮助文档按下的键会回显在提示符上。为了阻止安装程序在后续安装中"
#~ "使用 framebuffer，如帮助文档所述，您也可在引导提示后面加上 "
#~ "<userinput>fb=false</userinput>。"

#~ msgid "CD Contents"
#~ msgstr "CD 的内容"

#~ msgid ""
#~ "There are three basic variations of Debian Install CDs. The "
#~ "<emphasis>Business Card</emphasis> CD has a minimal installation that "
#~ "will fit on the small form factor CD media. It requires a network "
#~ "connection in order to install the rest of the base installation and make "
#~ "a usable system. The <emphasis>Network Install</emphasis> CD has all of "
#~ "the packages for a base install but requires a network connection to a "
#~ "Debian mirror site in order to install the extra packages one would want "
#~ "for a complete system . The set of Debian CDs can install a complete "
#~ "system from the wide range of packages without needing access to the "
#~ "network."
#~ msgstr ""
#~ "有三种基本的 Debian 安装光盘 CD 衍生品：<emphasis>名片式(Business Card)</"
#~ "emphasis> CD 有一个微型的安装程序，并且可以储存在一小张 CD 介质上。它需要"
#~ "借助网络连接来安装基本系统的其他部分，才能建立起一个可用的系统。<emphasis>"
#~ "网络安装(Network Install)</emphasis> CD 光盘具有基本系统需的所有包，但是它"
#~ "还是需要网络连接到 Debian 的镜像，安装其他的软件包建立一个完整的系统。"
#~ "Debian CD 光盘套件，则可以不使用网络就能安装大量软件包，建立完整的系统。"

#~ msgid ""
#~ "The IA-64 architecture uses the next generation Extensible Firmware "
#~ "Interface (EFI) from Intel. Unlike the traditional x86 BIOS which knows "
#~ "little about the boot device other than the partition table and Master "
#~ "Boot Record (MBR), EFI can read and write files from FAT16 or FAT32 "
#~ "formatted disk partitions. This simplifies the often arcane process of "
#~ "starting a system. The system boot loader and the EFI firmware that "
#~ "supports it have a full filesystem to store the files necessary for "
#~ "booting the machine. This means that the system disk on an IA-64 system "
#~ "has an additional disk partition dedicated to EFI instead of the simple "
#~ "MBR or boot block on more conventional systems."
#~ msgstr ""
#~ "IA-64 使用 Intel 最新的可拓展固件界面(Extensible Firmware Interface "
#~ "(EFI))。与传统的 x86 BIOS 只了解分区表和主引导记录(MBR)而不知道其他引导设"
#~ "备的特点不同，EFI 可以对 FAT16 和 FAT32 格式的硬盘分区进行读写操作。这个特"
#~ "点简化了通常很难以理解的系统启动过程。系统引导装载器以及 EFI 固件支持一个"
#~ "完全的文件系统，来保存引导一个机器所需要得所有文件。这意味着在一个 IA-64 "
#~ "系统上的系统磁盘，具有一个附加的专门为 EFI 服务的磁盘分区，而不是像传统系"
#~ "统上只是简单的 MBR 或者引导块记录。"

#~ msgid ""
#~ "The Debian Installer CD contains a small EFI partition where the "
#~ "<command>ELILO</command> bootloader, its configuration file, the "
#~ "installer's kernel, and initial filesystem (initrd) are located. The "
#~ "running system also contains an EFI partition where the necessary files "
#~ "for booting the system reside. These files are readable from the EFI "
#~ "Shell as described below."
#~ msgstr ""
#~ "Debian CD 包含了一个小型版本的 EFI 分区来放置 <command>ELILO</command>，它"
#~ "的配置文件，安装程序内核以及初始的文件系统(initrd)。运行的系统同时也包含了"
#~ "一个 EFI 分区用于放置引导系统所需要的必要文件。这些文件可以从 EFI Shell 读"
#~ "出，说明如下。"

#~ msgid ""
#~ "Most of the details of how <command>ELILO</command> actually loads and "
#~ "starts a system are transparent to the system installer. However, the "
#~ "installer must set up an EFI partition prior to installing the base "
#~ "system. Otherwise, the installation of <command>ELILO</command> will "
#~ "fail, rendering the system un-bootable. The EFI partition is allocated "
#~ "and formatted in the partitioning step of the installation prior to "
#~ "loading any packages on the system disk. The partitioning task also "
#~ "verifies that a suitable EFI partition is present before allowing the "
#~ "installation to proceed."
#~ msgstr ""
#~ "大部分有关如何 <command>ELILO</command> 实际装入和开始一个系统的细节是对系"
#~ "统安装程序透明的。但是，安装程序必须设置 EFI 分区优先级来安装基本系统。否"
#~ "则 <command>ELILO</command> 的安装将会失败并且导致系统不可引导。EFI 分区是"
#~ "分配并且格式 化与分区步骤以装入系统磁盘的所有软件包。分区任务也需要为接下"
#~ "来的安装检查一个 EFI 分区是否合适。"

#~ msgid ""
#~ "The EFI Boot Manager is presented as the last step of the firmware "
#~ "initialization. It displays a menu list from which the user can select an "
#~ "option. Depending on the model of system and what other software has been "
#~ "loaded on the system, this menu may be different from one system to "
#~ "another. There should be at least two menu items displayed, <command>Boot "
#~ "Option Maintenance Menu</command> and <command>EFI Shell (Built-in)</"
#~ "command>. Using the first option is preferred, however, if that option is "
#~ "not available or the CD for some reason does not boot with it, use the "
#~ "second option."
#~ msgstr ""
#~ "EFI Boot Manager 在固件初始化的最后一步会被启动。它显示一个菜单列表供用户"
#~ "选择。取决于系统的型号并且是否有其他的软件已经被装入系统，这个菜单可能在不"
#~ "同系统上有不同表现。在每一个系统上，至少有两个菜单项显示，<command>Boot "
#~ "Option Maintenance Menu</command> 与 <command>EFI Shell (Built-in)</"
#~ "command>。推荐使用第一个，当然，该选项不可用或者 CD 由于某种原因没法启动，"
#~ "使用第二个。"

#~ msgid "IMPORTANT"
#~ msgstr "重要"

#~ msgid ""
#~ "The EFI Boot Manager will select a default boot action, typically the "
#~ "first menu choice, within a pre-set number of seconds. This is indicated "
#~ "by a countdown at the bottom of the screen. Once the timer expires and "
#~ "the systems starts the default action, you may have to reboot the machine "
#~ "in order to continue the installation. If the default action is the EFI "
#~ "Shell, you can return to the Boot Manager by running <command>exit</"
#~ "command> at the shell prompt."
#~ msgstr ""
#~ "EFI Boot Manager 会在预设的几秒钟之后选择默认的启动方式，一般是第一菜单"
#~ "项。在屏幕底部会有倒计时显示。时间一到，系统按默认方式启动，这样您也许需要"
#~ "重新启动才能继续安装。如果默认是 EFI Shell，您可在提示符下执行 "
#~ "<command>exit</command>返回 Boot Manager。"

#~ msgid "Option 1: Booting from the Boot Option Maintenance Menu"
#~ msgstr "选项 1: 从 Boot Option Maintenance Menu 启动"

#~ msgid ""
#~ "Insert the CD in the DVD/CD drive and reboot the machine. The firmware "
#~ "will display the EFI Boot Manager page and menu after it completes its "
#~ "system initialization."
#~ msgstr ""
#~ "插入 CD 到 DVD/CD 驱动器，然后重启机器。固件在完成系统初始化后会显示 EFI "
#~ "Boot Manager 页面和菜单。"

#~ msgid ""
#~ "Select <command>Boot Maintenance Menu</command> from the menu with the "
#~ "arrow keys and press <command>ENTER</command>. This will display a new "
#~ "menu."
#~ msgstr ""
#~ "选择 <command>Boot Maintenance Menu</command> 通过方向键然后按下 "
#~ "<command>ENTER</command>。会显示一个新菜单。"

#~ msgid ""
#~ "Select <command>Boot From a File</command> from the menu with the arrow "
#~ "keys and press <command>ENTER</command>. This will display a list of "
#~ "devices probed by the firmware. You should see two menu lines containing "
#~ "either the label <command>Debian Inst [Acpi ...</command> or "
#~ "<command>Removable Media Boot</command>. If you examine the rest of the "
#~ "menu line, you will notice that the device and controller information "
#~ "should be the same."
#~ msgstr ""
#~ "选择 <command>Boot From a File</command> 通过方向键，然后按下 "
#~ "<command>ENTER</command>。将显示固件检测到的设备列表。您会看到两个菜单行，"
#~ "它们包括 <command>Debian Inst [Acpi ...</command> 或 <command>Removable "
#~ "Media Boot</command>标签。如果您检查菜单行其他部分，会看到对应的设备和控制"
#~ "器信息。"

#~ msgid ""
#~ "You can choose either of the entries that refer to the CD/DVD drive. "
#~ "Select your choice with the arrow keys and press <command>ENTER</"
#~ "command>. If you choose <command>Removable Media Boot</command> the "
#~ "machine will immediately start the boot load sequence. If you choose "
#~ "<command>Debian Inst [Acpi ...</command> instead, it will display a "
#~ "directory listing of the bootable portion of the CD, requiring you to "
#~ "proceed to the next (additional) step."
#~ msgstr ""
#~ "您可选择指向 CD/DVD 驱动的入口。通过方向键选择并按下 <command>ENTER</"
#~ "command>。如果您选择 <command>Removable Media Boot</command> 机器将进入启"
#~ "动步骤。如果您选择 <command>Debian Inst [Acpi ...</command>，它会显示一个"
#~ "可启动的 CD 目录列表，要求您进行(额外的)下一步。"

#~ msgid ""
#~ "You will only need this step if you chose <command>Debian Inst [Acpi ...</"
#~ "command>. The directory listing will also show <command>[Treat like "
#~ "Removable Media Boot]</command> on the next to the last line. Select this "
#~ "line with the arrow keys and press <command>ENTER</command>. This will "
#~ "start the boot load sequence."
#~ msgstr ""
#~ "您只在选择 <command>Debian Inst [Acpi ...</command> 时需要。目录列表还会显"
#~ "示 <command>[Treat like Removable Media Boot]</command> 至最后一行。用方向"
#~ "键选择，并按下 <command>ENTER</command>。这将进入启动步骤。"

#~ msgid ""
#~ "These steps start the Debian boot loader which will display a menu page "
#~ "for you to select a boot kernel and options. Proceed to selecting the "
#~ "boot kernel and options."
#~ msgstr ""
#~ "这些步骤启动的 Debian 引导器会显示一个菜单页用于选择启动内核和选项。进入选"
#~ "择启动内核和选项。"

#~ msgid "Option 2: Booting from the EFI Shell"
#~ msgstr "选项 2: 从 EFI Shell 启动"

#~ msgid ""
#~ "If, for some reason, option 1 is not successful, reboot the machine and "
#~ "when the EFI Boot Manager screen appears there should be one option "
#~ "called <command>EFI Shell [Built-in]</command>. Boot the Debian Installer "
#~ "CD with the following steps:"
#~ msgstr ""
#~ "某些情况下，选项 1 无法成功，重新启动机器然后在 EFI Boot Manager 画面出现"
#~ "的时候会有一个选项称为 <command>EFI Shell [Built-in]</command>。可以通过如"
#~ "下步骤来引导 Debian 安装程序 CD :"

#~ msgid ""
#~ "Insert the CD in the DVD/CD drive and reboot the machine. The firmware "
#~ "will display the EFI Boot Manager page and menu after it completes system "
#~ "initialization."
#~ msgstr "把 CD 放入 DVD/CD 驱动器。"

#~ msgid ""
#~ "Select <command>EFI Shell</command> from the menu with the arrow keys and "
#~ "press <command>ENTER</command>. The EFI Shell will scan all of the "
#~ "bootable devices and display them to the console before displaying its "
#~ "command prompt. The recognized bootable partitions on devices will show a "
#~ "device name of <filename>fs<replaceable>n</replaceable>:</filename>. All "
#~ "other recognized partitions will be named <filename>blk<replaceable>n</"
#~ "replaceable>:</filename>. If you inserted the CD just before entering the "
#~ "shell, this may take a few extra seconds as it initializes the CD drive."
#~ msgstr ""
#~ "选择 <command>EFI Shell</command> 然后按下 <command>ENTER</command>。EFI "
#~ "Shell 将扫描所有的可引导设备，并且在显示其命令提示符前在控制台列出它们。在"
#~ "设备上被辨认出的可引导分区，将显示成 <filename>fs<replaceable>n</"
#~ "replaceable>:</filename>。所有其他辨认出的分区，将被命名为 "
#~ "<filename>blk<replaceable>n</replaceable>:</filename>。如果您在进入 Shell "
#~ "之前就插入 CD，这将花费一些时间用于初始化 CD 驱动器。"

#~ msgid ""
#~ "Examine the output from the shell looking for the CDROM drive. It is most "
#~ "likely the <filename>fs0:</filename> device although other devices with "
#~ "bootable partitions will also show up as <filename>fs<replaceable>n</"
#~ "replaceable></filename>."
#~ msgstr ""
#~ "在检查 CD 驱动器期间请查看 Shell 的输出显示。一般来说是 <filename>fs0:</"
#~ "filename> 并且其他具有可引导分区的设备上也会显示成 "
#~ "<filename>fs<replaceable>n</replaceable></filename>。"

#~ msgid ""
#~ "Enter <command>fs<replaceable>n</replaceable>:</command> and press "
#~ "<command>ENTER</command> to select that device where <replaceable>n</"
#~ "replaceable> is the partition number for the CDROM. The shell will now "
#~ "display the partition number as its prompt."
#~ msgstr ""
#~ "进入 <command>fs<replaceable>n</replaceable>:</command> 然后按下 "
#~ "<command>ENTER</command> 来选择设备。这里 <replaceable>n</replaceable> 是 "
#~ "CD 光盘的分区号。Shell 现在将在提示符下显示分区号。"

#~ msgid ""
#~ "Enter <command>elilo</command> and press <command>ENTER</command>. This "
#~ "will start the boot load sequence."
#~ msgstr ""
#~ "进入 <command>elilo</command> 并按下 <command>ENTER</command>。这将进入启"
#~ "动步骤。"

#~ msgid ""
#~ "As with option 1, these steps start the Debian boot loader which will "
#~ "display a menu page for you to select a boot kernel and options. You can "
#~ "also enter the shorter <command>fs<replaceable>n</replaceable>:elilo</"
#~ "command> command at the shell prompt. Proceed to selecting the boot "
#~ "kernel and options."
#~ msgstr ""
#~ "与选项 1 相同，这些步骤也会启动 Debian 引导器，显示一个菜单页供选择启动内"
#~ "核和参数。您可在 shell 提示符下输入 <command>fs<replaceable>n</"
#~ "replaceable>:elilo</command>简短命令。进入选择启动内核和选项。"

#~ msgid "Installing using a Serial Console"
#~ msgstr "使用串口控制台安装"

#~ msgid ""
#~ "You may choose to perform an install using a monitor and keyboard or "
#~ "using a serial connection. To use a monitor/keyboard setup, select an "
#~ "option containing the string [VGA console]. To install over a serial "
#~ "connection, choose an option containing the string [<replaceable>BAUD</"
#~ "replaceable> baud serial console], where <replaceable>BAUD</replaceable> "
#~ "is the speed of your serial console. Menu items for the most typical baud "
#~ "rate settings on the ttyS0 device are preconfigured."
#~ msgstr ""
#~ "您可选择使用显示器与键盘或者串口连接来进行安装。要使用显示器/键盘配置，选"
#~ "择包含 [VGA console] 的选项。要通过串口连接，选择包含 [<replaceable>BAUD</"
#~ "replaceable> baud serial console] 的选项，其中 <replaceable>BAUD</"
#~ "replaceable> 是串行连接速度。对于大多数常见的波特率的 ttyS0 设备菜单项已经"
#~ "预置。"

#~ msgid ""
#~ "In most circumstances, you will want the installer to use the same baud "
#~ "rate as your connection to the EFI console. If you aren't sure what this "
#~ "setting is, you can obtain it using the command <command>baud</command> "
#~ "at the EFI shell."
#~ msgstr ""
#~ "大多时候，您会让安装程序使用与连接 EFI 控制台相同的波特率。如果您不知如何"
#~ "设置，可以通过命令 <command>baud</command> 在 EFI shell 获得。"

#~ msgid ""
#~ "If there is not an option available that is configured for the serial "
#~ "device or baud rate you would like to use, you may override the console "
#~ "setting for one of the existing menu options. For example, to use a 57600 "
#~ "baud console over the ttyS1 device, enter <command>console=ttyS1,57600n8</"
#~ "command> into the <classname>Boot:</classname> text window."
#~ msgstr ""
#~ "如果没有串行配置的选项或者您要使用的波特率，可以覆盖某个已有菜单项里面的波"
#~ "特率。例如，使用 57600 波特率覆盖 ttyS1 设备，输入 "
#~ "<command>console=ttyS1,57600n8</command> 到 <classname>Boot:</classname> "
#~ "文本窗口。"

#~ msgid ""
#~ "Most IA-64 boxes ship with a default console setting of 9600 baud. This "
#~ "setting is rather slow, and the normal installation process will take a "
#~ "significant time to draw each screen. You should consider either "
#~ "increasing the baud rate used for performing the installation, or "
#~ "performing a Text Mode installation. See the <classname>Params</"
#~ "classname> help menu for instructions on starting the installer in Text "
#~ "Mode."
#~ msgstr ""
#~ "大多数 IA-64 机器配备默认 9600 波特率的控制台。这样设太慢，普通安装过程将"
#~ "花费明显的时间刷新每个屏幕。您要么通过提高波特率提升安装效率，要么使用文本"
#~ "模式安装。参考 <classname>Params</classname> 帮助菜单，获得启动文本模式安"
#~ "装的指导。"

#~ msgid ""
#~ "If you select the wrong console type, you will be able to select the "
#~ "kernel and enter parameters but both the display and your input will go "
#~ "dead as soon as the kernel starts, requiring you to reboot before you can "
#~ "begin the installation."
#~ msgstr ""
#~ "如果您选择了错误的控制台类型，即便可以选择内核和输入参数，但显示与输入将在"
#~ "内核启动后死掉，只有重新启动才能开始安装。"

#~ msgid "Selecting the Boot Kernel and Options"
#~ msgstr "选择启动内核与选项"

#~ msgid ""
#~ "The boot loader will display a form with a menu list and a text window "
#~ "with a <classname>Boot:</classname> prompt. The arrow keys select an item "
#~ "from the menu and any text typed at the keyboard will appear in the text "
#~ "window. There are also help screens which can be displayed by pressing "
#~ "the appropriate function key. The <classname>General</classname> help "
#~ "screen explains the menu choices and the <classname>Params</classname> "
#~ "screen explains the common command line options."
#~ msgstr ""
#~ "引导程序会显示一个表单，具有菜单列与包含 <classname>Boot:</classname> 提示"
#~ "符的文本窗口。用方向键选择菜单项并且键盘输入的字符将显示在文本窗口。输入适"
#~ "当的功能键会显示帮助窗口。<classname>普通的</classname>帮助窗口解释菜单选"
#~ "项，<classname>Params</classname>窗口解释命令行参数。"

#~ msgid ""
#~ "Consult the <classname>General</classname> help screen for the "
#~ "description of the kernels and install modes most appropriate for your "
#~ "installation. You should also consult <xref linkend=\"boot-parms\"/> "
#~ "below for any additional parameters that you may want to set in the "
#~ "<classname>Boot:</classname> text window. The kernel version you choose "
#~ "selects the kernel version that will be used for both the installation "
#~ "process and the installed system. If you encounter kernel problems with "
#~ "the installation, you may also have those same problems with the system "
#~ "you install. The following two steps will select and start the install:"
#~ msgstr ""
#~ "查询 <classname>General</classname> 帮助页面，了解内核的说明和安装对应的模"
#~ "式。您还应该查询 <xref linkend=\"boot-parms\"/>，了解在文本窗口中需要设置"
#~ "的额外参数 <classname>Boot:</classname>，您选择的内核版本将会用在安装过程"
#~ "和安装好的系统中。如果安装时碰到内核问题，在安装好的系统中也会出现。以下两"
#~ "步选择和开始安装："

#~ msgid ""
#~ "Select the kernel version and installation mode most appropriate to your "
#~ "needs with the arrow keys."
#~ msgstr "使用方向键选择您需要的内核版本和适合的安装模式。"

#~ msgid ""
#~ "Enter any boot parameters by typing at the keyboard. The text will be "
#~ "displayed directly in the text window. This is where kernel parameters "
#~ "(such as serial console settings) are specified."
#~ msgstr ""
#~ "在键盘上输入任何启动参数。这些文字将直接显示在文本窗口。这是内核参数(如同"
#~ "串口控制台)指定的。"

#~ msgid ""
#~ "Press <command>ENTER</command>. This will load and start the kernel. The "
#~ "kernel will display its usual initialization messages followed by the "
#~ "first screen of the Debian Installer."
#~ msgstr ""
#~ "按下 <command>ENTER</command>。会加载并启动内核。内核在 Debian 安装程序的"
#~ "第一个屏幕显示常规的初始化信息。"

#~ msgid ""
#~ "Proceed to the next chapter to continue the installation where you will "
#~ "set up the language locale, network, and disk partitions."
#~ msgstr "进入到下一章继续安装本地语言，网络和磁盘分区。"

#, fuzzy
#~ msgid ""
#~ "Booting an IA-64 system from the network is similar to a CD boot. The "
#~ "only difference is how the installation kernel is loaded. The EFI Boot "
#~ "Manager can load and start programs from a server on the network. Once "
#~ "the installation kernel is loaded and starts, the system install will "
#~ "proceed thru the same steps as the CD install with the exception that the "
#~ "packages of the base install will be loaded from the network rather than "
#~ "the CD drive."
#~ msgstr ""
#~ "在 IA64 系统上面从网络引导很像从 CD 上引导。唯一的区别是如何装入内核。EFI "
#~ "Boot Manager 可以装入并且从网络服务器开始程序。一旦安装内核被装入并且启"
#~ "动，系统 的安装将和 CD 安装步骤相同，只是基本软件包将从网络装入而不是 CD "
#~ "光盘驱动器。"

#, fuzzy
#~ msgid ""
#~ "Network booting an IA-64 system requires two architecture-specific "
#~ "actions. On the boot server, DHCP and TFTP must be configured to deliver "
#~ "<command>elilo</command>. On the client a new boot option must be defined "
#~ "in the EFI boot manager to enable loading over a network."
#~ msgstr ""
#~ "网络引导一台 IA64 系统需要两个体系相关的操作。在引导服务器上，DHCP 和 "
#~ "TFTP 必须配置成可以传送 <command>elilo</command>。在客户端，一个新的引导选"
#~ "项必须在 EFI Boot Manager 下定义来打开网络的装入。"

#~ msgid "Configuring the Server"
#~ msgstr "配置网络服务器"

#, fuzzy
#~ msgid ""
#~ "A suitable TFTP entry for network booting an IA-64 system looks something "
#~ "like this: <informalexample><screen>\n"
#~ "host mcmuffin {\n"
#~ "        hardware ethernet 00:30:6e:1e:0e:83;\n"
#~ "        fixed-address 10.0.0.21;\n"
#~ "        filename \"debian-installer/ia64/elilo.efi\";\n"
#~ "}\n"
#~ "</screen></informalexample> Note that the goal is to get <command>elilo."
#~ "efi</command> running on the client."
#~ msgstr ""
#~ "一个合适的用于 ia64 系统网络引导的 TFTP 选项应该看起来像这样： "
#~ "<informalexample><screen>\n"
#~ "host mcmuffin {\n"
#~ "        hardware ethernet 00:30:6e:1e:0e:83;\n"
#~ "        fixed-address 10.0.0.21;\n"
#~ "        filename \"debian-installer/ia64/elilo.efi\";\n"
#~ "}\n"
#~ "</screen></informalexample> 注明的是，目标是让 <command>elilo.efi</"
#~ "command> 在客户端运行。"

#~ msgid ""
#~ "Extract the <filename>netboot.tar.gz</filename> file into the directory "
#~ "used as the root for your tftp server. Typical tftp root directories "
#~ "include <filename>/var/lib/tftp</filename> and <filename>/tftpboot</"
#~ "filename>. This will create a <filename>debian-installer</filename> "
#~ "directory tree containing the boot files for an IA-64 system."
#~ msgstr ""
#~ "使用 root 解压 <filename>netboot.tar.gz</filename> 文件到您的 tftp 服务"
#~ "器。典型的 tftp 根目录包括 <filename>/var/lib/tftp</filename> 和 "
#~ "<filename>/tftpboot</filename>。这将创建 <filename>debian-installer</"
#~ "filename> 目录树，它包括 IA-64 系统需要的启动文件。"

#~ msgid ""
#~ "# cd /var/lib/tftp\n"
#~ "# tar xvfz /home/user/netboot.tar.gz\n"
#~ "./\n"
#~ "./debian-installer/\n"
#~ "./debian-installer/ia64/\n"
#~ "[...]"
#~ msgstr ""
#~ "# cd /var/lib/tftp\n"
#~ "# tar xvfz /home/user/netboot.tar.gz\n"
#~ "./\n"
#~ "./debian-installer/\n"
#~ "./debian-installer/ia64/\n"
#~ "[...]"

#~ msgid ""
#~ "The <filename>netboot.tar.gz</filename> contains an <filename>elilo.conf</"
#~ "filename> file that should work for most configurations. However, should "
#~ "you need to make changes to this file, you can find it in the "
#~ "<filename>debian-installer/ia64/</filename> directory. It is possible to "
#~ "have different config files for different clients by naming them using "
#~ "the client's IP address in hex with the suffix <filename>.conf</filename> "
#~ "instead of <filename>elilo.conf</filename>. See documentation provided in "
#~ "the <classname>elilo</classname> package for details."
#~ msgstr ""
#~ "<filename>netboot.tar.gz</filename> 包含 <filename>elilo.conf</filename> "
#~ "可以工作在大多数的配置下。另外，要修改这个文件，您可以在 <filename>debian-"
#~ "installer/ia64/</filename> 目录中找到。这只需要按照客户机 IP 地址的16进制"
#~ "命名这些文件并且给出 <filename>.conf</filename> 后缀取代 <filename>elilo."
#~ "conf</filename>。请查看 <classname>elilo</classname> 软件包附带的文档以获"
#~ "得细节。"

#~ msgid "Configuring the Client"
#~ msgstr "配置客户机"

#~ msgid ""
#~ "To configure the client to support TFTP booting, start by booting to EFI "
#~ "and entering the <guimenu>Boot Option Maintenance Menu</guimenu>. "
#~ "<itemizedlist> <listitem><para> Add a boot option. </para></listitem> "
#~ "<listitem><para> You should see one or more lines with the text "
#~ "<guimenuitem>Load File [Acpi()/.../Mac()]</guimenuitem>. If more than one "
#~ "of these entries exist, choose the one containing the MAC address of the "
#~ "interface from which you'll be booting. Use the arrow keys to highlight "
#~ "your choice, then press enter. </para></listitem> <listitem><para> Name "
#~ "the entry <userinput>Netboot</userinput> or something similar, save, and "
#~ "exit back to the boot options menu. </para></listitem> </itemizedlist> "
#~ "You should see the new boot option you just created, and selecting it "
#~ "should initiate a DHCP query, leading to a TFTP load of <filename>elilo."
#~ "efi</filename> from the server."
#~ msgstr ""
#~ "如果要配置支持 TFTP 引导的客户机，只需要引导至 EFI，然后进入 "
#~ "<guimenu>Boot Option Maintenance Menu</guimenu>。<itemizedlist> "
#~ "<listitem><para> 加入一个引导选项。</para></listitem> <listitem><para> 您"
#~ "会看到一行或多行带有 <guimenuitem>Load File [Acpi()/.../Mac()]</"
#~ "guimenuitem> 文字。如果多于一个入口存在，选择您需要启动的包含 MAC 地址的网"
#~ "卡。使用方向键高亮选择，然后按回车。</para></listitem> <listitem><para> 给"
#~ "此选项起名，如 <userinput>Netboot</userinput> 或者相似的，保存然后退回至引"
#~ "导选项菜单。</para></listitem> </itemizedlist> 您现在应该能够看到刚刚创建"
#~ "的新引导选项，选择后应该会初始化一个 DHCP 查询，然后会从服务器装入 "
#~ "<filename>elilo.efi</filename>。"

#~ msgid ""
#~ "The boot loader will display its prompt after it has downloaded and "
#~ "processed its configuration file. At this point, the installation "
#~ "proceeds with the same steps as a CD install. Select a boot option as in "
#~ "above and when the kernel has completed installing itself from the "
#~ "network, it will start the Debian Installer."
#~ msgstr ""
#~ "在下载并且处理配置文件后，引导装载程序将显示它的提示符。从这里开始，安装过"
#~ "程将和 CD 安装是 同样的过程。在内核已经完成从网络的自我安装后选择一个像上"
#~ "面提到的引导选项，它将开始 Debian 安装程序。"

#~ msgid "Choosing an Installation Method"
#~ msgstr "选择安装方法"

#~ msgid ""
#~ "Some &arch-title; subarchs have the option of booting using either a 2.4."
#~ "x or 2.2.x linux kernel. When such a choice exists, try the 2.4.x linux "
#~ "kernel. The installer should also require less memory when using a 2.4.x "
#~ "linux kernel as 2.2.x support requires a fixed-sized ramdisk and 2.4.x "
#~ "uses tmpfs."
#~ msgstr ""
#~ "一些 &arch-title; 子体系可以选择使用从 2.4.x 或 2.2.x linux 内核启动。如果"
#~ "可以这样选取，请使用 2.4.x linux 内核。使用 2.4.x linux 内核的安装程序要求"
#~ "较少的内存，因为 2.2.x 支持需要固定尺寸的 ramdisk 而 2.4.x 使用 tmpfs。"

#~ msgid ""
#~ "If you are using a 2.2.x linux kernel, then you need to use the "
#~ "&ramdisksize; kernel parameter."
#~ msgstr "如果您在使用 2.2.x 内核，那么需要设置 &ramdisksize; 内核参数。"

#~ msgid ""
#~ "Make sure <userinput>root=/dev/ram</userinput> is one of your kernel "
#~ "parameters."
#~ msgstr "确保 <userinput>root=/dev/ram</userinput> 在内核参数中。"

#~ msgid ""
#~ "If you're having trouble, check <ulink url=\"&url-m68k-cts-faq;\">cts's "
#~ "&arch-title; debian-installer FAQ</ulink>."
#~ msgstr ""
#~ "如果碰到麻烦，检查 <ulink url=\"&url-m68k-cts-faq;\">cts's &arch-title; "
#~ "debian-installer FAQ</ulink>。"

#~ msgid "Amiga"
#~ msgstr "Amiga"

#~ msgid ""
#~ "The only method of installation available to amiga is the hard drive (see "
#~ "<xref linkend=\"m68k-boot-hd\"/>). <emphasis>In other words the cdrom is "
#~ "not bootable.</emphasis>"
#~ msgstr ""
#~ "amiga 仅支持从硬盘安装方式(参阅 <xref linkend=\"m68k-boot-hd\"/>)。"
#~ "<emphasis>也就是说 cdrom 无法启动。</emphasis>"

#~ msgid ""
#~ "Amiga does not currently work with bogl, so if you are seeing bogl "
#~ "errors, you need to include the boot parameter <userinput>fb=false</"
#~ "userinput>."
#~ msgstr ""
#~ "当前 Amiga 不能与 bogl 一起工作，如果您看到 bogl 错误，您应该包含下面内核"
#~ "参数 <userinput>fb=false</userinput>。"

#~ msgid "Atari"
#~ msgstr "Atari"

#~ msgid ""
#~ "The installer for atari may be started from either the hard drive (see "
#~ "<xref linkend=\"m68k-boot-hd\"/>) or from floppies (see <xref linkend="
#~ "\"boot-from-floppies\"/>). <emphasis>In other words the cdrom is not "
#~ "bootable.</emphasis>"
#~ msgstr ""
#~ "atari 安装程序可以从硬盘(参阅 <xref linkend=\"m68k-boot-hd\"/>) 或软盘 (参"
#~ "阅 <xref linkend=\"boot-from-floppies\"/>)。<emphasis>也就是说 cdrom 无法"
#~ "启动。</emphasis>"

#~ msgid ""
#~ "Atari does not currently work with bogl, so if you are seeing bogl "
#~ "errors, you need to include the boot parameter <userinput>fb=false</"
#~ "userinput>."
#~ msgstr ""
#~ "当前 Atari 不能与 bogl 一起工作，如果您看到 bogl 错误，应该包含下面内核参"
#~ "数 <userinput>fb=false</userinput>。"

#~ msgid "BVME6000"
#~ msgstr "BVME6000"

#~ msgid ""
#~ "The installer for BVME6000 may be started from a cdrom (see <xref linkend="
#~ "\"m68k-boot-cdrom\"/>), floppies (see <xref linkend=\"boot-from-floppies"
#~ "\"/>), or the net (see <xref linkend=\"boot-tftp\"/>)."
#~ msgstr ""
#~ "BVME6000 上安装程序可以从 cdrom (参阅 <xref linkend=\"m68k-boot-cdrom\"/"
#~ ">), 软盘(参阅 <xref linkend=\"boot-from-floppies\"/>)，或网络(参阅 <xref "
#~ "linkend=\"boot-tftp\"/>)。"

#~ msgid "Macintosh"
#~ msgstr "Macintosh"

#~ msgid ""
#~ "The only method of installation available to mac is from the hard drive "
#~ "(see <xref linkend=\"m68k-boot-hd\"/>). <emphasis>In other words the "
#~ "cdrom is not bootable.</emphasis> Macs do not have a working 2.4.x kernel."
#~ msgstr ""
#~ "mac 上启动的唯一方法是硬盘(参阅 <xref linkend=\"m68k-boot-hd\"/>)。"
#~ "<emphasis>也就是说 cdrom 无法启动。</emphasis> Macs 不能工作在 2.4 内核"
#~ "上。"

#~ msgid ""
#~ "If your hardware uses a 53c9x-based scsi bus, then you may need to "
#~ "include the kernel parameter <userinput>mac53c9x=1,0</userinput>. "
#~ "Hardware with two such scsi buses, such as the Quadra 950, will need "
#~ "<userinput>mac53c9x=2,0</userinput> instead. Alternatively, the parameter "
#~ "can be specified as <userinput>mac53c9x=-1,0</userinput> which will leave "
#~ "autodetection on, but which will disable SCSI disconnects. Note that "
#~ "specifying this parameter is only necessary if you have more than one "
#~ "hard disk; otherwise, the system will run faster if you do not specify it."
#~ msgstr ""
#~ "如果您的硬件中包括基于 53c9x 的 scsi 总线，那么您需要包括下面的内核参数 "
#~ "<userinput>mac53c9x=1,0</userinput>。带有两个这种 scsi 总线的硬件，如 "
#~ "Quadra 950，您需要 <userinput>mac53c9x=2,0</userinput> 参数。另外，参数指"
#~ "定为 <userinput>mac53c9x=-1,0</userinput> 可打开自动侦测，但却禁止了 SCSI "
#~ "断开。注意，使用这种参数仅用于不止一个硬盘的情况下; 如果不指定，您的系统将"
#~ "运行得更快。"

#~ msgid "MVME147 and MVME16x"
#~ msgstr "MVME147 and MVME16x"

#~ msgid ""
#~ "The installer for MVME147 and MVME16x may be started from either floppies "
#~ "(see <xref linkend=\"boot-from-floppies\"/>) or the net (see <xref "
#~ "linkend=\"boot-tftp\"/>). <emphasis>In other words the cdrom is not "
#~ "bootable.</emphasis>"
#~ msgstr ""
#~ "MVEM147 和 MVEM16x 可以从软盘(参阅 <xref linkend=\"boot-from-floppies\"/>)"
#~ "或网络(参阅 <xref linkend=\"boot-tftp\"/>)。<emphasis>也就是说 cdrom 无法"
#~ "启动。</emphasis>"

#~ msgid "Q40/Q60"
#~ msgstr "Q40/Q60"

#~ msgid ""
#~ "The only method of installation available to Q40/Q60 is from the hard "
#~ "drive (see <xref linkend=\"m68k-boot-hd\"/>). <emphasis>In other words "
#~ "the cdrom is not bootable.</emphasis>"
#~ msgstr ""
#~ "Q40/Q60 只支持从硬盘安装(参阅 <xref linkend=\"m68k-boot-hd\"/>)。"
#~ "<emphasis>也就是说 cdrom 无法启动。</emphasis>"

#~ msgid "Booting from a Hard Disk"
#~ msgstr "从硬盘引导"

# index.docbook:1591, index.docbook:2097
#~ msgid ""
#~ "Booting from an existing operating system is often a convenient option; "
#~ "for some systems it is the only supported method of installation."
#~ msgstr ""
#~ "从一个以存在的操作系统上引导通常是一个方便的选择；对于一些系统来说，这则是"
#~ "唯一支持的 安装方法。"

# index.docbook:1597, index.docbook:2103
#~ msgid ""
#~ "To boot the installer from hard disk, you will have already completed "
#~ "downloading and placing the needed files in <xref linkend=\"boot-drive-"
#~ "files\"/>."
#~ msgstr ""
#~ "如果要从硬盘上引导安装程序，您也许已经在 <xref linkend=\"boot-drive-files"
#~ "\"/> 处下载并且在 <xref linkend=\"boot-drive-files\"/> 安置了所需文件。"

#~ msgid ""
#~ "At least six different ramdisks may be used to boot from the hard drive, "
#~ "three different types each with and without support for a 2.2.x linux "
#~ "kernel (see <ulink url=\"&disturl;/main/installer-&architecture;/current/"
#~ "images/MANIFEST\">MANIFEST</ulink> for details)."
#~ msgstr ""
#~ "至少有六中不同的 ramdisk 可以从硬盘启动，三个不同的类型分别用于支持或不支"
#~ "持 2.2.x linux 内核(参阅 <ulink url=\"&disturl;/main/installer-"
#~ "&architecture;/current/images/MANIFEST\">MANIFEST</ulink> 了解更多细节)。"

#~ msgid ""
#~ "The three different types of ramdisks are <filename>cdrom</filename>, "
#~ "<filename>hd-media</filename>, and <filename>nativehd</filename>. These "
#~ "ramdisks differ only in their source for installation packages. The "
#~ "<filename>cdrom</filename> ramdisk uses a cdrom to get debian-installer "
#~ "packages. The <filename>hd-media</filename> ramdisk uses an iso image "
#~ "file of a cdrom currently residing on a hard disk. Finally, the "
#~ "<filename>nativehd</filename> ramdisk uses the net to install packages."
#~ msgstr ""
#~ "这三种 ramdisk 类型为 <filename>cdrom</filename>, <filename>hd-media</"
#~ "filename>，和 <filename>nativehd</filename>。它们的区别仅在于安装软件包的"
#~ "源不同。<filename>cdrom</filename> ramdisk 使用 cdrom 获取 debian-"
#~ "installer 软件包。<filename>hd-media</filename> ramdisk 使用硬盘上的 iso "
#~ "映象文件。最后，<filename>nativehd</filename> ramdisk 使用网络安装软件包。"

#~ msgid "Booting from AmigaOS"
#~ msgstr "从 AmigaOS 上引导"

#~ msgid ""
#~ "In the <command>Workbench</command>, start the Linux installation process "
#~ "by double-clicking on the <guiicon>StartInstall</guiicon> icon in the "
#~ "<filename>debian</filename> directory."
#~ msgstr ""
#~ "在 <command>Workbench</command> 下，双击 <guiicon>StartInstall</guiicon> "
#~ "图标来启动 Linux 安装过程，它位于 <filename>debian</filename> 目录中。"

#~ msgid ""
#~ "You may have to press the &enterkey; key twice after the Amiga installer "
#~ "program has output some debugging information into a window. After this, "
#~ "the screen will go grey, there will be a few seconds' delay. Next, a "
#~ "black screen with white text should come up, displaying all kinds of "
#~ "kernel debugging information. These messages may scroll by too fast for "
#~ "you to read, but that's OK. After a couple of seconds, the installation "
#~ "program should start automatically, so you can continue down at <xref "
#~ "linkend=\"d-i-intro\"/>."
#~ msgstr ""
#~ "在 Amiga 安装程序在一个窗口已经输出一些调试信息，您也可以按下 &enterkey; "
#~ "两次。之后屏幕将变灰，这里有一些很短的延迟。接下来，一个黑屏白字将显示更多"
#~ "的调试信息。这些 信息可能上翻的非常快无法看到，但这没有问题。在一些时间过"
#~ "后，安装程序应该自动安装，因此您可以继续参阅 <xref linkend=\"d-i-intro\"/"
#~ ">。"

#~ msgid "Booting from Atari TOS"
#~ msgstr "从 Atari TOS 引导"

#~ msgid ""
#~ "At the GEM desktop, start the Linux installation process by double-"
#~ "clicking on the <guiicon>bootstra.prg</guiicon> icon in the "
#~ "<filename>debian</filename> directory and clicking <guibutton>Ok</"
#~ "guibutton> at the program options dialog box."
#~ msgstr ""
#~ "在 GEM 桌面上，可以通过双击 <guiicon>bootstra.prg</guiicon> 图标，它位于 "
#~ "<filename>debian</filename> 目录下，并且在程序选项对话框内点击 "
#~ "<guibutton>Ok</guibutton> 来开始启动安装过程。"

#~ msgid ""
#~ "You may have to press the &enterkey; key after the Atari bootstrap "
#~ "program has output some debugging information into a window. After this, "
#~ "the screen will go grey, there will be a few seconds' delay. Next, a "
#~ "black screen with white text should come up, displaying all kinds of "
#~ "kernel debugging information. These messages may scroll by too fast for "
#~ "you to read, but that's OK. After a couple of seconds, the installation "
#~ "program should start automatically, so you can continue below at <xref "
#~ "linkend=\"d-i-intro\"/>."
#~ msgstr ""
#~ "当 Atari 安装程序在一个窗口输出一些调试信息以后，您可能必须按下 "
#~ "&enterkey;。之后屏幕将变灰，这里有一些很短的延迟。接下来，一个黑屏白字将显"
#~ "示更多的调试信息。这些信息可能上翻的非常快没法看，但这没有问题。在一些时间"
#~ "过后，安装程序应该自动安装，因此您可以继续参阅 <xref linkend=\"d-i-intro"
#~ "\"/>。"

#~ msgid "Booting from MacOS"
#~ msgstr "从 MacOS 引导"

#~ msgid ""
#~ "You must retain the original Mac system and boot from it. It is "
#~ "<emphasis>essential</emphasis> that, when booting MacOS in preparation "
#~ "for booting the Penguin linux loader, you hold the <keycap>shift</keycap> "
#~ "key down to prevent extensions from loading. If you don't use MacOS "
#~ "except for loading linux, you can accomplish the same thing by removing "
#~ "all extensions and control panels from the Mac's System Folder. Otherwise "
#~ "extensions may be left running and cause random problems with the running "
#~ "linux kernel."
#~ msgstr ""
#~ "您必须有原来的 Mac 系统，并从它启动。它是 <emphasis>必要的</emphasis>，当"
#~ "启动 MacOS 准备启动 Penguin linux 加载器时，按住 <keycap>shift</keycap> 键"
#~ "阻止加载扩展。如果除了加载 linux 不使用 MacOS，您可以从 Mac 的系统文件夹下"
#~ "清除所有的扩展和控制面板达到同样的目的。否则扩展会运行使运行的 linux 内核"
#~ "参数随机错误。"

#~ msgid ""
#~ "Macs require the <command>Penguin</command> bootloader. If you do not "
#~ "have the tools to handle a <command>Stuffit</command> archive, &penguin19."
#~ "hfs; is an hfs disk image with <command>Penguin</command> unpacked. <xref "
#~ "linkend=\"create-floppy\"/> describes how to copy this image to a floppy."
#~ msgstr ""
#~ "Mac 要求 <command>Penguin</command> 加载器。如果您没有这个工具，要把 "
#~ "<command>Stuffit</command> 归档，&penguin19.hfs; 是一个 hfs 磁盘映象，带"
#~ "有 <command>Penguin</command> 解压包。<xref linkend=\"create-floppy\"/> 说"
#~ "明如何将该映象复制到软盘。"

#~ msgid ""
#~ "At the MacOS desktop, start the Linux installation process by double-"
#~ "clicking on the <guiicon>Penguin Prefs</guiicon> icon in the "
#~ "<filename>Penguin</filename> directory. The <command>Penguin</command> "
#~ "booter will start up. Go to the <guimenuitem>Settings</guimenuitem> item "
#~ "in the <guimenu>File</guimenu> menu, click the <guilabel>Kernel</"
#~ "guilabel> tab. Select the kernel (<filename>vmlinuz</filename>) and "
#~ "ramdisk (<filename>initrd.gz</filename>) images in the <filename>install</"
#~ "filename> directory by clicking on the corresponding buttons in the upper "
#~ "right corner, and navigating the file select dialogs to locate the files."
#~ msgstr ""
#~ "在 MacOS 桌面，启动 Linux 安装进行需要双击 <guiicon>Penguin Prefs</"
#~ "guiicon> 图标，它位于 <filename>Penguin</filename> 目录。"
#~ "<command>Penguin</command> 引导将开始。进入到 <guimenuitem>Settings</"
#~ "guimenuitem> 项，它位于 <guimenu>File</guimenu>菜单，点击 "
#~ "<guilabel>Kernel</guilabel> 选项卡。选择内核(<filename>vmlinuz</filename>)"
#~ "和 ramdisk (<filename>initrd.gz</filename>) 映象，它位于 "
#~ "<filename>install</filename> 目录，点击右上角对应的按钮，引导文件选择对话"
#~ "框至文件。"

#~ msgid ""
#~ "To set the boot parameters in Penguin, choose <guimenu>File</guimenu> -"
#~ "&gt; <guimenuitem>Settings...</guimenuitem>, then switch to the "
#~ "<guilabel>Options</guilabel> tab. Boot parameters may be typed in to the "
#~ "text entry area. If you will always want to use these settings, select "
#~ "<guimenu>File</guimenu> -&gt; <guimenuitem>Save Settings as Default</"
#~ "guimenuitem>."
#~ msgstr ""
#~ "为 Penguin 设置启动参数，选择 <guimenu>File</guimenu> -&gt; "
#~ "<guimenuitem>Settings...</guimenuitem>，然后切换到 <guilabel>Options</"
#~ "guilabel> 选项卡。启动参数可以写到文本区域。如果您要一直采用这些设置，选"
#~ "择 <guimenu>File</guimenu> -&gt; <guimenuitem>保存设置为默认</"
#~ "guimenuitem>。"

#~ msgid ""
#~ "Close the <guilabel>Settings</guilabel> dialog, save the settings and "
#~ "start the bootstrap using the <guimenuitem>Boot Now</guimenuitem> item in "
#~ "the <guimenu>File</guimenu> menu."
#~ msgstr ""
#~ "关闭 <guilabel>Settings</guilabel> 对话框，保存设置然后开始引导用 "
#~ "<guimenuitem>Boot Now</guimenuitem> 项，它位于 <guimenu>File</guimenu> 菜"
#~ "单。"

#~ msgid ""
#~ "The <command>Penguin</command> booter will output some debugging "
#~ "information into a window. After this, the screen will go grey, there "
#~ "will be a few seconds' delay. Next, a black screen with white text should "
#~ "come up, displaying all kinds of kernel debugging information. These "
#~ "messages may scroll by too fast for you to read, but that's OK. After a "
#~ "couple of seconds, the installation program should start automatically, "
#~ "so you can continue below at <xref linkend=\"d-i-intro\"/>."
#~ msgstr ""
#~ "<command>Penguin</command> 启动将输出一些调试信息到窗口。然后，屏幕变灰，"
#~ "会有数秒延迟。接着，带有文本的黑屏出现，显示各种内核调试信息。这些信息可能"
#~ "滚动很快无法阅读，这是正常的。再过一段时间，安装程序就会自动运行，您可以按"
#~ "下面步骤继续 <xref linkend=\"d-i-intro\"/>。"

#~ msgid "Booting from Q40/Q60"
#~ msgstr "从 Q40/Q60 启动"

#~ msgid "FIXME"
#~ msgstr "FIXME"

#~ msgid ""
#~ "The installation program should start automatically, so you can continue "
#~ "below at <xref linkend=\"d-i-intro\"/>."
#~ msgstr ""
#~ "安装程序就会自动运行，您可以按下面步骤继续 <xref linkend=\"d-i-intro\"/>。"

#~ msgid ""
#~ "Currently, the only &arch-title; subarchitecture that supports CD-ROM "
#~ "booting is the BVME6000."
#~ msgstr "目前唯一 &arch-title; 子体系结构支持 CD 光盘引导的是 BVME6000。"

#~ msgid ""
#~ "After booting the VMEbus systems you will be presented with the LILO "
#~ "<prompt>Boot:</prompt> prompt. At that prompt enter one of the following "
#~ "to boot Linux and begin installation proper of the Debian software using "
#~ "vt102 terminal emulation:"
#~ msgstr ""
#~ "在引导 VMEbus 系统后您应该看到 LILO <prompt>Boot:</prompt> 提示符。在提示"
#~ "符下输入以下一种方法来引导 Linux，并开始在一个 vt102 仿真终端下面安装普通"
#~ "的 Debian 软件。"

#~ msgid "type <screen>i6000 &enterkey;</screen> to install a BVME4000/6000"
#~ msgstr "输入 <screen>i6000 &enterkey;</screen> 来安装 BVME4000/6000"

#~ msgid "type <screen>i162 &enterkey;</screen> to install an MVME162"
#~ msgstr "输入 <screen>i162 &enterkey;</screen> 来安装 MVME162"

#~ msgid "type <screen>i167 &enterkey;</screen> to install an MVME166/167"
#~ msgstr "输入 <screen>i167 &enterkey;</screen> 来安装 MVME166/167"

#~ msgid ""
#~ "You may additionally append the string <screen>TERM=vt100</screen> to use "
#~ "vt100 terminal emulation, e.g., <screen>i6000 TERM=vt100 &enterkey;</"
#~ "screen>."
#~ msgstr ""
#~ "您也可以附加一个字符串 <screen>TERM=vt100</screen> 来使用 vt100 终端模拟。"
#~ "比如,<screen>i6000 TERM=vt100 &enterkey;</screen>。"

#~ msgid ""
#~ "For most &arch-title; architectures, booting from a local filesystem is "
#~ "the recommended method."
#~ msgstr ""
#~ "对于大多数 m68k 体系来说，推荐方法是从一个本地文件系统引导安装程序。"

#~ msgid ""
#~ "Booting from the boot floppy is supported only for Atari and VME (with a "
#~ "SCSI floppy drive on VME) at this time."
#~ msgstr "从软盘引导的方法目前只支持 Atari 以及 VME (VME 有一个 SCSI 软驱)。"

# index.docbook:1899, index.docbook:1946
#~ msgid "SGI TFTP Booting"
#~ msgstr "SGI TFTP 引导"

#~ msgid ""
#~ "After entering the command monitor use <informalexample><screen>\n"
#~ "bootp():\n"
#~ "</screen></informalexample> on SGI machines to boot linux and to begin "
#~ "installation of the Debian Software. In order to make this work you may "
#~ "have to unset the <envar>netaddr</envar> environment variable. Type "
#~ "<informalexample><screen>\n"
#~ "unsetenv netaddr\n"
#~ "</screen></informalexample> in the command monitor to do this."
#~ msgstr ""
#~ "SGI 上引导 linux 要在进入命令监视器后使用 <informalexample><screen>\n"
#~ "bootp():\n"
#~ "</screen></informalexample> 来开始 Debian 软件的安装。为了让它运行，您可能"
#~ "必须取消 <envar>netaddr</envar> 环境变量的设置。通过命令监视器上输入 "
#~ "<informalexample><screen>\n"
#~ "unsetenv netaddr\n"
#~ "</screen></informalexample> 可以达到此目的。"

# index.docbook:1919, index.docbook:1968
#~ msgid "Broadcom BCM91250A and BCM91480B TFTP Booting"
#~ msgstr "Broadcom BCM91250A 与 BCM91480B TFTP 引导"

#~ msgid ""
#~ "On the Broadcom BCM91250A and BCM91480B evaluation boards, you have to "
#~ "load the SiByl boot loader via TFTP which will then load and start the "
#~ "Debian installer. In most cases, you will first obtain an IP address via "
#~ "DHCP but it is also possible to configure a static address. In order to "
#~ "use DHCP, you can enter the following command on the CFE prompt: "
#~ "<informalexample><screen>\n"
#~ "ifconfig eth0 -auto\n"
#~ "</screen></informalexample> Once you have obtained an IP address, you can "
#~ "load SiByl with the following command: <informalexample><screen>\n"
#~ "boot 192.168.1.1:/boot/sibyl\n"
#~ "</screen></informalexample> You need to substitute the IP address listed "
#~ "in this example with either the name or the IP address of your TFTP "
#~ "server. Once you issue this command, the installer will be loaded "
#~ "automatically."
#~ msgstr ""
#~ "在 Broadcom BCM91250A 和 BCM91480B 开发板上，您不得不通过 TFTP 加载 SiByl "
#~ "引导程序，它接着将加载和启动 Debian 安装程序。大多数情况下，您通过 DHCP 获"
#~ "得 IP 地址，当然也可以指定静态地址。要使用 DHCP，您可以在下面 CFE 提示符下"
#~ "输入命令： <informalexample><screen>\n"
#~ "ifconfig eth0 -auto\n"
#~ "</screen></informalexample> 一旦得到 IP 地址，就可以使用下面命令加载 "
#~ "SiByl： <informalexample><screen>\n"
#~ "boot 192.168.1.1:/boot/sibyl\n"
#~ "</screen></informalexample> 您要用 TFTP 服务器的 IP 地址或域名替换上面例子"
#~ "中的 IP 地址。输入以后，安装程序就会自动加载。"

# index.docbook:1943, index.docbook:2477
#~ msgid "Boot Parameters"
#~ msgstr "引导参数"

#~ msgid ""
#~ "On SGI machines you can append boot parameters to the <command>bootp():</"
#~ "command> command in the command monitor."
#~ msgstr ""
#~ "在 SGI 上您可以在命令监视器下给 <command>bootp():</command> 命令附加一个引"
#~ "导参数。"

#~ msgid ""
#~ "Following the <command>bootp():</command> command you can give the path "
#~ "and name of the file to boot if you did not give an explicit name via "
#~ "your bootp/dhcp server. Example: <informalexample><screen>\n"
#~ "bootp():/boot/tftpboot.img\n"
#~ "</screen></informalexample> Further kernel parameters can be passed via "
#~ "<command>append</command>:"
#~ msgstr ""
#~ "如果您没有通过 bootp/dhcp 服务器给出一个清楚的名字，接着 <command>bootp():"
#~ "</command> 命令，您可以给出路径和文件名称来引导。例如 "
#~ "<informalexample><screen>\n"
#~ "bootp():/boot/tftpboot.img\n"
#~ "</screen></informalexample> 更多的内核参数传递可以用 <command>append</"
#~ "command>:"

#~ msgid "bootp(): append=\"root=/dev/sda1\""
#~ msgstr "bootp(): append=\"root=/dev/sda1\""

#~ msgid ""
#~ "You cannot pass any boot parameters directly from the CFE prompt. "
#~ "Instead, you have to edit the <filename>/boot/sibyl.conf</filename> file "
#~ "on the TFTP server and add your parameters to the "
#~ "<replaceable>extra_args</replaceable> variable."
#~ msgstr ""
#~ "您不能从 CFE 提示符直接传递启动参数。而是编辑 TFTP 服务器上的 <filename>/"
#~ "boot/sibyl.conf</filename> 文件并添加参数到 <replaceable>extra_args</"
#~ "replaceable> 变量。"

# index.docbook:1899, index.docbook:1946
#~ msgid "Cobalt TFTP Booting"
#~ msgstr "Cobalt TFTP 引导"

#~ msgid ""
#~ "Strictly speaking, Cobalt does not use TFTP but NFS to boot. You need to "
#~ "install an NFS server and put the installer files in <filename>/nfsroot</"
#~ "filename>. When you boot your Cobalt, you have to press the left and the "
#~ "right cursor buttons at the same time and the machine will boot via the "
#~ "network from NFS. It will then display several options on the display. "
#~ "There are the following two installation methods:"
#~ msgstr ""
#~ "严格地说，Cobalt 并不支持 NFS 启动。您需要安装 NFS 服务器并将安装程序文件"
#~ "放入 <filename>/nfsroot</filename>。当启动 Cobalt 时，您必须同时按下左右光"
#~ "标键，机器就从 NFS 网络启动。它会在显示器上显示几个选项。有下面两种安装方"
#~ "法："

#~ msgid ""
#~ "Via SSH (default): In this case, the installer will configure the network "
#~ "via DHCP and start an SSH server. It will then display a random password "
#~ "and other login information (such as the IP address) on the Cobalt LCD. "
#~ "When you connect to the machine with an SSH client you can start with the "
#~ "installation."
#~ msgstr ""
#~ "通过 SSH (默认)：这种情况下，安装程序将通过 DHCP 配置网络并启动 SSH 服务"
#~ "器。它将在 LCD 上显示一个随机的密码和其他的登录信息 (如 IP 地址)。当您用 "
#~ "SSH 连接到机器就可以开始安装。"

#~ msgid ""
#~ "Via serial console: Using a null modem cable, you can connect to the "
#~ "serial port of your Cobalt machine (using 115200 bps) and perform the "
#~ "installation this way. This option is not available on Qube 2700 (Qube1) "
#~ "machines since they have no serial port."
#~ msgstr ""
#~ "通过串口控制台：使用 null modem 线，您可以连接到 Cobalt 机器的串口 (使用 "
#~ "115200 bps) 然后进行安装。此选项不会出现在 Qube 2700 (Qube1) 机器上，因为"
#~ "它没有串口。"

#~ msgid ""
#~ "You cannot pass any boot parameters directly. Instead, you have to edit "
#~ "the <filename>/nfsroot/default.colo</filename> file on the NFS server and "
#~ "add your parameters to the <replaceable>args</replaceable> variable."
#~ msgstr ""
#~ "您不能直接传递引导参数。而不得不编辑位于 NFS 服务器上的 <filename>/"
#~ "nfsroot/default.colo</filename> 文件，将参数给 <replaceable>args</"
#~ "replaceable> 变量。"

#~ msgid "s390 Limitations"
#~ msgstr "s390 的限制"

#~ msgid ""
#~ "In order to run the installation system a working network setup and ssh "
#~ "session is needed on S/390."
#~ msgstr "为了在 S/390 上安装系统，需要一个工作的网络设置和 ssh 会话。"

#~ msgid ""
#~ "The booting process starts with a network setup that prompts you for "
#~ "several network parameters. If the setup is successful, you will login to "
#~ "the system by starting an ssh session which will launch the standard "
#~ "installation system."
#~ msgstr ""
#~ "引导过程开始时候要求一些网络参数来进行网络设置。如果设置是成功的，您将会通"
#~ "过一个 ssh 会话登录进入系统，并且开始一个标准系统安装。"

#~ msgid "s390 Boot Parameters"
#~ msgstr "s390 引导参数"

#~ msgid ""
#~ "On S/390 you can append boot parameters in the parm file. This file can "
#~ "either be in ASCII or EBCDIC format. Please read <ulink url=\"&url-s390-"
#~ "devices;\">Device Drivers and Installation Commands</ulink> for more "
#~ "information about S/390-specific boot parameters."
#~ msgstr ""
#~ "在 S/390 上您可以在参数文件下面附加一些引导参数。这个文件可以是 ASCII 或"
#~ "者 EBCDIC格式的。请阅读 <ulink url=\"&url-s390-devices;\">设备驱动程序以及"
#~ "安装命令</ulink> 来获得更多有关 S/390 特定的引导参数。"

#~ msgid ""
#~ "Currently, the only &arch-title; subarchitectures that support CD-ROM "
#~ "booting are PReP and New World PowerMacs. On PowerMacs, hold the "
#~ "<keycap>c</keycap> key, or else the combination of <keycap>Command</"
#~ "keycap>, <keycap>Option</keycap>, <keycap>Shift</keycap>, and "
#~ "<keycap>Delete</keycap> keys together while booting to boot from the CD-"
#~ "ROM."
#~ msgstr ""
#~ "当前来说，&arch-title; 下的子体系结构只有 PReP 和 New World PowerMacs 支"
#~ "持 CD 光盘引导。在 PowerMacs 下 在从 CD 光盘上引导时，按住 <keycap>c</"
#~ "keycap> 键，或者组合键 <keycap>Command</keycap>, <keycap>Option</keycap>, "
#~ "<keycap>Shift</keycap>, 和 <keycap>Delete</keycap> 。"

#~ msgid ""
#~ "OldWorld PowerMacs will not boot a Debian CD, because OldWorld computers "
#~ "relied on a Mac OS ROM CD boot driver to be present on the CD, and a free-"
#~ "software version of this driver is not available. All OldWorld systems "
#~ "have floppy drives, so use the floppy drive to launch the installer, and "
#~ "then point the installer to the CD for the needed files."
#~ msgstr ""
#~ "OldWorld Powermacs 不能从一张 Debian CD 上引导，因为 OldWorld 计算机需要"
#~ "在 CD 上安装一个 MacOSROM CD 引导驱动程序但是目前还没有自由的版本。所有的 "
#~ "OldWorld 系统具有软盘驱动程序，因此可以使用软盘驱动程序来启动安装程序，然"
#~ "后让安装程序 从 CD 上选择所需要的文件。"

#~ msgid ""
#~ "If your system doesn't boot directly from CD-ROM, you can still use the "
#~ "CD-ROM to install the system. On NewWorlds, you can also use an "
#~ "OpenFirmware command to boot from the CD-ROM manually. Follow the "
#~ "instructions in <xref linkend=\"boot-newworld\"/> for booting from the "
#~ "hard disk, except use the path to <command>yaboot</command> on the CD at "
#~ "the OF prompt, such as"
#~ msgstr ""
#~ "如果您的系统不支持直接从 CD 光盘启动，仍然可以采用 CD 光盘来安装系统。在 "
#~ "NewWorlds 上面，可以使用一个 OpenFirmware 命令来手工从 CD 光盘引导。按照 "
#~ "<xref linkend=\"boot-newworld\"/> 的方法从硬盘来进行引导，只是在 OF 提示符"
#~ "下使用 CD 上的 <command>yaboot</command> 路径，比如："

#~ msgid "0 &gt; boot cd:,\\install\\yaboot"
#~ msgstr "0 &gt; boot cd:,\\install\\yaboot"

#~ msgid "Booting from Hard Disk"
#~ msgstr "从硬盘引导"

#~ msgid "Booting CHRP from OpenFirmware"
#~ msgstr "从 OpenFirmware 引导 CHRP"

#~ msgid "Not yet written."
#~ msgstr "还没有完成"

#~ msgid "Booting OldWorld PowerMacs from MacOS"
#~ msgstr "从 OldWorld PowerMacs 的 MacOS 上引导"

#~ msgid ""
#~ "If you set up BootX in <xref linkend=\"files-oldworld\"/>, you can use it "
#~ "to boot into the installation system. Double click the <guiicon>BootX</"
#~ "guiicon> application icon. Click on the <guibutton>Options</guibutton> "
#~ "button and select <guilabel>Use Specified RAM Disk</guilabel>. This will "
#~ "give you the chance to select the <filename>ramdisk.image.gz</filename> "
#~ "file. You may need to select the <guilabel>No Video Driver</guilabel> "
#~ "checkbox, depending on your hardware. Then click the <guibutton>Linux</"
#~ "guibutton> button to shut down MacOS and launch the installer."
#~ msgstr ""
#~ "如果您在 <xref linkend=\"files-oldworld\"/> 中设置好了 BootX，您可以使用它"
#~ "引导进入安装系统。双击 <guiicon>BootX</guiicon> 应用程序图标。点击 "
#~ "<guibutton>Options</guibutton> 按钮并且选择 <guilabel>Use Specified RAM "
#~ "Disk</guilabel>。这将可以让您选择 <filename>ramdisk.image.gz</filename> 文"
#~ "件。也许根据您的硬件情况需要选择 <guilabel>No Video Driver</guilabel> 选择"
#~ "框。然后点击 <guibutton>Linux</guibutton> 按钮，来关闭 MacOS 以及启动安装"
#~ "程序。"

#~ msgid "Booting NewWorld Macs from OpenFirmware"
#~ msgstr "从 NewWorld Macs 的 OpenFirmware 引导"

#~ msgid ""
#~ "You will have already placed the <filename>vmlinux</filename>, "
#~ "<filename>initrd.gz</filename>, <filename>yaboot</filename>, and "
#~ "<filename>yaboot.conf</filename> files at the root level of your HFS "
#~ "partition in <xref linkend=\"files-newworld\"/>. Restart the computer, "
#~ "and immediately (during the chime) hold down the <keycap>Option</keycap>, "
#~ "<keycap>Command (cloverleaf/Apple)</keycap>, <keycap>o</keycap>, and "
#~ "<keycap>f</keycap> keys all together. After a few seconds you will be "
#~ "presented with the Open Firmware prompt. At the prompt, type "
#~ "<informalexample><screen>\n"
#~ "0 &gt; boot hd:<replaceable>x</replaceable>,yaboot\n"
#~ "</screen></informalexample> replacing <replaceable>x</replaceable> with "
#~ "the partition number of the HFS partition where the kernel and yaboot "
#~ "files were placed, followed by a &enterkey;. On some machines, you may "
#~ "need to use <userinput>ide0:</userinput> instead of <userinput>hd:</"
#~ "userinput>. In a few more seconds you will see a yaboot prompt "
#~ "<informalexample><screen>\n"
#~ "boot:\n"
#~ "</screen></informalexample> At yaboot's <prompt>boot:</prompt> prompt, "
#~ "type either <userinput>install</userinput> or <userinput>install "
#~ "video=ofonly</userinput> followed by a &enterkey;. The "
#~ "<userinput>video=ofonly</userinput> argument is for maximum "
#~ "compatibility; you can try it if <userinput>install</userinput> doesn't "
#~ "work. The Debian installation program should start."
#~ msgstr ""
#~ "您也许已经按照 <filename>vmlinux</filename>, <filename>initrd.gz</"
#~ "filename>, <filename>yaboot</filename> 和 <filename>yaboot.conf</"
#~ "filename> 在 HFS 分区的根层次放置好了 <xref linkend=\"files-newworld\"/> "
#~ "文件。请重新启动计算机，并且立即(在发声时)同时按住 <keycap>Option</"
#~ "keycap>, <keycap>Command (cloverleaf/Apple)</keycap>, <keycap>o</keycap>, "
#~ "和 <keycap>f</keycap> 键。过几秒钟后，将进入 Open Firmware 提示符。在提示"
#~ "符下，输入： <informalexample><screen>\n"
#~ "0 &gt; boot hd:<replaceable>x</replaceable>,yaboot\n"
#~ "</screen></informalexample> 用放置内核和 yaboot 文件的 HFS 分区号来替换 "
#~ "<replaceable>x</replaceable> 然后按下 &enterkey;。在某些机器上，您也许需要"
#~ "时用 <userinput>ide0:</userinput> 来替换 <userinput>hd:</userinput>，在接"
#~ "下来的几秒钟内，将会看到一个提示符 <informalexample><screen>\n"
#~ "boot:\n"
#~ "</screen></informalexample> 在 yaboot 的 <prompt>boot:</prompt> 提示符下，"
#~ "输入 <userinput>install</userinput> 或者 <userinput>install video=ofonly</"
#~ "userinput> 然后点击 &enterkey;。<userinput>video=ofonly</userinput> 参数是"
#~ "用于最大可能性的兼容性；您可以在 <userinput>install</userinput> 不工作的情"
#~ "况下尝试使用它。Debian 安装程序应该立刻启动。"

# index.docbook:700, index.docbook:2176
#~ msgid "Booting from USB memory stick"
#~ msgstr "从 USB 闪盘引导"

#~ msgid ""
#~ "Currently, NewWorld PowerMac systems are known to support USB booting."
#~ msgstr "当前，New World PowerMac 系统支持从 USB 引导。"

#~ msgid ""
#~ "Make sure you have prepared everything from <xref linkend=\"boot-usb-files"
#~ "\"/>. To boot a Macintosh system from a USB stick, you will need to use "
#~ "the Open Firmware prompt, since Open Firmware does not search USB storage "
#~ "devices by default. To get to the prompt, hold down "
#~ "<keycombo><keycap>Command</keycap> <keycap>Option</keycap> <keycap>o</"
#~ "keycap> <keycap>f</keycap></keycombo> all together while booting (see "
#~ "<xref linkend=\"invoking-openfirmware\"/>)."
#~ msgstr ""
#~ "确认您已经准备就绪 <xref linkend=\"boot-usb-files\"/>。要从 USB 记忆棒引"
#~ "导 Macintosh 系统，即使 Open Firmware 默认不搜索 USB 存储设备，您也需要使"
#~ "用 Open Firmware 提示符。要得到提示符，在启动时按住 "
#~ "<keycombo><keycap>Command</keycap> <keycap>Option</keycap> <keycap>o</"
#~ "keycap> <keycap>f</keycap></keycombo> (参考 <xref linkend=\"invoking-"
#~ "openfirmware\"/>)。"

#~ msgid ""
#~ "You will need to work out where the USB storage device appears in the "
#~ "device tree, since at the moment <command>ofpath</command> cannot work "
#~ "that out automatically. Type <userinput>dev / ls</userinput> and "
#~ "<userinput>devalias</userinput> at the Open Firmware prompt to get a list "
#~ "of all known devices and device aliases. On the author's system with "
#~ "various types of USB stick, paths such as <filename>usb0/disk</filename>, "
#~ "<filename>usb0/hub/disk</filename>, <filename>/pci@f2000000/usb@1b,1/"
#~ "disk@1</filename>, and <filename>/pci@f2000000/usb@1b,1/hub@1/disk@1</"
#~ "filename> work."
#~ msgstr ""
#~ "您还需要算出 USB 存储设备在设备树上的位置，因为现在 <command>ofpath</"
#~ "command> 无法自动计算。键入 <userinput>dev / ls</userinput> 和 "
#~ "<userinput>devalias</userinput> 到 Open Firmware 提示符下，得到所有的已知"
#~ "设备和设备别名。在笔者的系统上有各种 USB 记忆棒，路径诸如 <filename>usb0/"
#~ "disk</filename>, <filename>usb0/hub/disk</filename>, <filename>/"
#~ "pci@f2000000/usb@1b,1/disk@1</filename>，和 <filename>/pci@f2000000/"
#~ "usb@1b,1/hub@1/disk@1</filename> 。"

#~ msgid ""
#~ "Having worked out the device path, use a command like this to boot the "
#~ "installer: <informalexample><screen>\n"
#~ "boot <replaceable>usb0/disk</replaceable>:<replaceable>2</replaceable>,\\"
#~ "\\:tbxi\n"
#~ "</screen></informalexample> The <replaceable>2</replaceable> matches the "
#~ "Apple_HFS or Apple_Bootstrap partition onto which you copied the boot "
#~ "image earlier, and the <userinput>,\\\\:tbxi</userinput> part instructs "
#~ "Open Firmware to boot from the file with an HFS file type of \"tbxi\" (i."
#~ "e. <command>yaboot</command>) in the directory previously blessed with "
#~ "<command>hattrib -b</command>."
#~ msgstr ""
#~ "得到设备路径之后，用类似下面的命令启动安装程序： "
#~ "<informalexample><screen>\n"
#~ "boot <replaceable>usb0/disk</replaceable>:<replaceable>2</replaceable>,\\"
#~ "\\:tbxi\n"
#~ "</screen></informalexample> <replaceable>2</replaceable> 匹配前面复制启动"
#~ "映象所在的 Apple_HFS 或 Apple_Bootstrap 分区，<userinput>,\\\\:tbxi</"
#~ "userinput> 部分指示 Open Firmware 从具有 \"tbxi\" 类型的 HFS 文件引导(如 "
#~ "<command>yaboot</command>) 位于前面使用 bless 目录 <command>hattrib -b</"
#~ "command>。"

#~ msgid ""
#~ "The system should now boot up, and you should be presented with the "
#~ "<prompt>boot:</prompt> prompt. Here you can enter optional boot "
#~ "arguments, or just hit &enterkey;."
#~ msgstr ""
#~ "系统应该可以引导，然后您看到 <prompt>boot:</prompt> 提示符。这里您可以输入"
#~ "启动参数，或者只按下 &enterkey;。"

#~ msgid ""
#~ "This boot method is new, and may be difficult to get to work on some "
#~ "NewWorld systems. If you have problems, please file an installation "
#~ "report, as explained in <xref linkend=\"submit-bug\"/>."
#~ msgstr ""
#~ "这个是新的启动方法，可能无法在一些 NewWorld 系统上工作。如果您遇到问题，请"
#~ "写下安装报告，参阅 <xref linkend=\"submit-bug\"/>。"

#~ msgid "Currently, PReP and New World PowerMac systems support netbooting."
#~ msgstr "目前来说，PReP 以及 New World PowerMac 系统支持网络引导。"

#~ msgid ""
#~ "On machines with Open Firmware, such as NewWorld Power Macs, enter the "
#~ "boot monitor (see <xref linkend=\"invoking-openfirmware\"/>) and use the "
#~ "command <command>boot enet:0</command>. PReP and CHRP boxes may have "
#~ "different ways of addressing the network. On a PReP machine, you should "
#~ "try <userinput>boot <replaceable>server_ipaddr</replaceable>,"
#~ "<replaceable>file</replaceable>,<replaceable>client_ipaddr</replaceable></"
#~ "userinput>."
#~ msgstr ""
#~ "在 Open Firmware 机器上，比如 NewWorld Power Macs，进入引导监视器(参阅 "
#~ "<xref linkend=\"invoking-openfirmware\"/>) 并且使用命令 <command>boot "
#~ "enet:0</command>。PReP 以及 CHRP 可能使用不同的途径来确认网络。在一台 "
#~ "PReP 机器上，您应该尝试 <userinput>boot <replaceable>server_ipaddr</"
#~ "replaceable>,<replaceable>file</replaceable>,<replaceable>client_ipaddr</"
#~ "replaceable></userinput>。"

#~ msgid ""
#~ "Booting from floppies is supported for &arch-title;, although it is "
#~ "generally only applicable for OldWorld systems. NewWorld systems are not "
#~ "equipped with floppy drives, and attached USB floppy drives are not "
#~ "supported for booting."
#~ msgstr ""
#~ "&arch-title; 支持从软盘引导，尽管它本来只适合 OldWorld 系统。NewWorld 系统"
#~ "并没有安装 软盘驱动器，并且附带的 USB 软盘并不支持引导。"

#~ msgid ""
#~ "To boot from the <filename>boot-floppy-hfs.img</filename> floppy, place "
#~ "it in floppy drive after shutting the system down, and before pressing "
#~ "the power-on button."
#~ msgstr ""
#~ "若需要从 <filename>boot-floppy-hfs.img</filename> 软盘引导，请在关闭系统后"
#~ "在按下电源开关前把它放到软盘驱动器内。"

#~ msgid ""
#~ "For those not familiar with Macintosh floppy operations: a floppy placed "
#~ "in the machine prior to boot will be the first priority for the system to "
#~ "boot from. A floppy without a valid boot system will be ejected, and the "
#~ "machine will then check for bootable hard disk partitions."
#~ msgstr ""
#~ "对于不熟悉 Macintosh 软盘操作的人来说：一个放在软驱的软盘将获得第一优先引"
#~ "导顺序。一个 没有有效引导系统的软盘将回被弹出，并且机器将检查硬盘分区。"

#~ msgid ""
#~ "After booting, the <filename>root.bin</filename> floppy is requested. "
#~ "Insert the root floppy and press &enterkey;. The installer program is "
#~ "automatically launched after the root system has been loaded into memory."
#~ msgstr ""
#~ "引导之后需要含有 <filename>root.bin</filename> 的软盘。插入引导软盘并且按"
#~ "下 &enterkey;。安装程序将在根系统被装入内存后自动启动。"

#~ msgid "PowerPC Boot Parameters"
#~ msgstr "PowerPC 引导参数"

#~ msgid ""
#~ "Many older Apple monitors used a 640x480 67Hz mode. If your video appears "
#~ "skewed on an older Apple monitor, try appending the boot argument "
#~ "<userinput>video=atyfb:vmode:6</userinput> , which will select that mode "
#~ "for most Mach64 and Rage video hardware. For Rage 128 hardware, this "
#~ "changes to <userinput>video=aty128fb:vmode:6</userinput> ."
#~ msgstr ""
#~ "许多比较老的 Apple 显示器使用 640x480 67Hz 模式。如果您的显示在这些老 "
#~ "Apple 显示器上是扭曲的，请尝试加入引导参数 <userinput>video=atyfb:"
#~ "vmode:6</userinput> 。它将为大多数 Mach64 和 Rage 显示设备选择合适的模式。"
#~ "对于 Rage 128 来说，请改变其值为 <userinput>video=aty128fb:vmode:6</"
#~ "userinput> 。"

#~ msgid ""
#~ "On machines with OpenBoot, simply enter the boot monitor on the machine "
#~ "which is being installed (see <xref linkend=\"invoking-openboot\"/>). Use "
#~ "the command <userinput>boot net</userinput> to boot from a TFTP and RARP "
#~ "server, or try <userinput>boot net:bootp</userinput> or <userinput>boot "
#~ "net:dhcp</userinput> to boot from a TFTP and BOOTP or DHCP server. Some "
#~ "older OpenBoot revisions require using the device name, such as "
#~ "<userinput>boot le()</userinput>; these probably don't support BOOTP nor "
#~ "DHCP."
#~ msgstr ""
#~ "在有 OpenBoot 的机器上，简单地进入安装机器的引导监视器, (参见 <xref "
#~ "linkend=\"invoking-openboot\"/>)。请使用命令 <userinput>boot net</"
#~ "userinput> 来从一个 TFTP 和 RARP 服务器上引导，或者也可以用 "
#~ "<userinput>boot net:bootp</userinput> 或 <userinput>boot net:dhcp</"
#~ "userinput> 来从一个 TFTP 和 DHCP 服务器上引导。一些比较老的 OpenBoot 版本"
#~ "需要使用设备名称，例如 <userinput>boot le()</userinput>；这些可能不支持 "
#~ "DHCP。"

#~ msgid ""
#~ "Most OpenBoot versions support the <userinput>boot cdrom</userinput> "
#~ "command which is simply an alias to boot from the SCSI device on ID 6 (or "
#~ "the secondary master for IDE based systems). You may have to use the "
#~ "actual device name for older OpenBoot versions that don't support this "
#~ "special command. Note that some problems have been reported on Sun4m (e."
#~ "g., Sparc 10s and Sparc 20s) systems booting from CD-ROM."
#~ msgstr ""
#~ "大多数 OpenBoot 版本支持 <userinput>boot cdrom</userinput> 命令。它其实是"
#~ "从 ID 为 6 的 SCSI 设备进行引导的一个别名。(对于 IDE 系统来说，它是第二个"
#~ "主硬盘)。在较早的 OpenBoot 版本上，您可能必须使用实际的设备名称，因为它们"
#~ "不支持这个特殊的命令。注意在 Sun4m (比如 Sparc 10s 和 Sparc 20s) 系统上用 "
#~ "CD 光盘引导据说有些问题。"

#~ msgid ""
#~ "To boot from floppy on a Sparc, use <informalexample><screen>\n"
#~ "Stop-A -&gt; OpenBoot: \"boot floppy\"\n"
#~ "</screen></informalexample> Be warned that the newer Sun4u (ultra) "
#~ "architecture does not support floppy booting. A typical error message is "
#~ "<computeroutput>Bad magic number in disk label - Can't open disk label "
#~ "package</computeroutput>. Furthermore, a number of Sun4c models (such as "
#~ "the IPX) do not support the compressed images found on the disks, so also "
#~ "are not supported."
#~ msgstr ""
#~ "在 SPARC 机器上用软驱引导，请使用 <informalexample><screen>\n"
#~ "Stop-A -&gt; OpenBoot: \"boot floppy\"\n"
#~ "</screen></informalexample> 注意更新的 Sun4u (ultra) 结构不支持软驱引导，"
#~ "一个标准的错误信息是 <computeroutput>Bad magic number in disk label - "
#~ "Can't open disk label package</computeroutput>。甚至，一些 Sun4c 型号 (比"
#~ "如 IPX) 不支持磁盘上找到的压缩 映像，所以这些都不被支持。"

#~ msgid ""
#~ "Several Sparcs (e.g. Ultra 10) have an OBP bug that prevents them from "
#~ "booting (instead of not supporting booting at all). The appropriate OBP "
#~ "update can be downloaded as product ID 106121 from <ulink url=\"http://"
#~ "sunsolve.sun.com\"></ulink>."
#~ msgstr ""
#~ "不少 Sparcs (比如 Ultra 10) 有一个 OBP 缺陷。它阻止这些机器引导 (从而完全"
#~ "不支持引导)。合适的 OBP 更新可以从下面连接的 ID 106121 中获得，<ulink url="
#~ "\"http://sunsolve.sun.com\"></ulink>。"

#~ msgid ""
#~ "If you are booting from the floppy, and you see messages such as "
#~ "<informalexample><screen>\n"
#~ "Fatal error: Cannot read partition\n"
#~ "Illegal or malformed device name\n"
#~ "</screen></informalexample> then it is possible that floppy booting is "
#~ "simply not supported on your machine."
#~ msgstr ""
#~ "如果您正在从软盘引导，并且看到如下信息 <informalexample><screen>\n"
#~ "Fatal error: Cannot read partition\n"
#~ "Illegal or malformed device name\n"
#~ "</screen></informalexample> 那么很可能您的机器不支持软盘引导。"

#~ msgid "IDPROM Messages"
#~ msgstr "IDPROM 消息"

#~ msgid ""
#~ "If you cannot boot because you get messages about a problem with "
#~ "<quote>IDPROM</quote>, then it's possible that your NVRAM battery, which "
#~ "holds configuration information for you firmware, has run out. See the "
#~ "<ulink url=\"&url-sun-nvram-faq;\">Sun NVRAM FAQ</ulink> for more "
#~ "information."
#~ msgstr ""
#~ "如果您由于得到一个有关<quote>IDPROM</quote>问题的消息而不能引导，这可能是 "
#~ "NVRAM 电池已经用光。通常它为固件保持配置信息。请查阅 <ulink url=\"&url-"
#~ "sun-nvram-faq;\">Sun NVRAM FAQ</ulink> 以获得更多信息。"

#~ msgid ""
#~ "Boot parameters are Linux kernel parameters which are generally used to "
#~ "make sure that peripherals are dealt with properly. For the most part, "
#~ "the kernel can auto-detect information about your peripherals. However, "
#~ "in some cases you'll have to help the kernel a bit."
#~ msgstr ""
#~ "引导参数是 Linux 内核的参数。一般用于确保外围设备能够正确地运行。对于其中"
#~ "的大多数部分来说，内核可以自动检查外围设备的相关信息。但是在某些情况下，您"
#~ "可能需要给内核一点小小的帮助。"

#~ msgid ""
#~ "If this is the first time you're booting the system, try the default boot "
#~ "parameters (i.e., don't try setting parameters) and see if it works "
#~ "correctly. It probably will. If not, you can reboot later and look for "
#~ "any special parameters that inform the system about your hardware."
#~ msgstr ""
#~ "如果这是您第一次引导系统，尝试缺省的引导参数(即：不要输入任何参数)并且检查"
#~ "是否工作正确。大部分情况下应该是这样，如果不是，可以重新启动，并且检查需要"
#~ "告诉系统什么样的特定参数。"

#~ msgid ""
#~ "Information on many boot parameters can be found in the <ulink url="
#~ "\"http://www.tldp.org/HOWTO/BootPrompt-HOWTO.html\"> Linux BootPrompt "
#~ "HOWTO</ulink>, including tips for obscure hardware. This section contains "
#~ "only a sketch of the most salient parameters. Some common gotchas are "
#~ "included below in <xref linkend=\"boot-troubleshooting\"/>."
#~ msgstr ""
#~ "有关很多引导参数的信息可以查看 <ulink url=\"http://www.tldp.org/HOWTO/"
#~ "BootPrompt-HOWTO.html\"> Linux BootPrompt HOWTO</ulink>，其中包括一些老旧"
#~ "硬件的解决方法。这一节只描述一些最常用的基本参数。一些常见的问题描述见 "
#~ "<xref linkend=\"boot-troubleshooting\"/>。"

#~ msgid ""
#~ "When the kernel boots, a message <informalexample><screen>\n"
#~ "Memory:<replaceable>avail</replaceable>k/<replaceable>total</"
#~ "replaceable>k available\n"
#~ "</screen></informalexample> should be emitted early in the process. "
#~ "<replaceable>total</replaceable> should match the total amount of RAM, in "
#~ "kilobytes. If this doesn't match the actual amount of RAM you have "
#~ "installed, you need to use the <userinput>mem=<replaceable>ram</"
#~ "replaceable></userinput> parameter, where <replaceable>ram</replaceable> "
#~ "is set to the amount of memory, suffixed with <quote>k</quote> for "
#~ "kilobytes, or <quote>m</quote> for megabytes. For example, both "
#~ "<userinput>mem=65536k</userinput> and <userinput>mem=64m</userinput> mean "
#~ "64MB of RAM."
#~ msgstr ""
#~ "当内核引导的时候，有一条消息 <informalexample><screen>\n"
#~ "Memory:<replaceable>avail</replaceable>k/<replaceable>total</"
#~ "replaceable>k available \n"
#~ "</screen></informalexample> 应该显示在引导过程的早期。其中 "
#~ "<replaceable>total</replaceable> 应该符合您内存的总量，单位为千字节。如果"
#~ "此参数不符合您实际的内存总数，需要使用 <userinput>mem=<replaceable>ram</"
#~ "replaceable></userinput> 参数。这里 <replaceable>ram</replaceable> 被设置"
#~ "为内存的数量。如是<quote>k</quote>则为千字节，<quote>m</quote>为兆字节。例"
#~ "如，<userinput>mem=65536k</userinput> 和 <userinput>mem=64m</userinput> 标"
#~ "明 64MB 内存。"

#~ msgid ""
#~ "If you are booting with a serial console, generally the kernel will "
#~ "autodetect this<phrase arch=\"mipsel\"> (although not on DECstations)</"
#~ "phrase>. If you have a videocard (framebuffer) and a keyboard also "
#~ "attached to the computer which you wish to boot via serial console, you "
#~ "may have to pass the <userinput>console=<replaceable>device</"
#~ "replaceable></userinput> argument to the kernel, where "
#~ "<replaceable>device</replaceable> is your serial device, which is usually "
#~ "something like <filename>ttyS0</filename>."
#~ msgstr ""
#~ "如果您通过一个串行控制台引导，一般来说内核将自动检测<phrase arch=\"mipsel"
#~ "\">(尽管不是在一台 DECstations 上面)</phrase>。如果您有一块显示卡"
#~ "(framebuffer)和一个键盘，通过串口附加于想引导的计算机上面，也许需要传递 "
#~ "<userinput>console=<replaceable>device</replaceable></userinput> 参数给内"
#~ "核，这里 <replaceable>device</replaceable> 是串口设备。通常类似于 "
#~ "<filename>ttyS0</filename>。"

#~ msgid ""
#~ "For &arch-title; the serial devices are <filename>ttya</filename> or "
#~ "<filename>ttyb</filename>. Alternatively, set the <envar>input-device</"
#~ "envar> and <envar>output-device</envar> OpenPROM variables to "
#~ "<filename>ttya</filename>."
#~ msgstr ""
#~ "对于 &arch-title; 串口设备名称是 <filename>ttya</filename> 或 "
#~ "<filename>ttyb</filename> 。或者，通过设置<envar>input-device</envar> 和 "
#~ "<envar>output-device</envar> OpenPROM 变量至 <filename>ttya</filename>。"

#~ msgid "Debian Installer Parameters"
#~ msgstr "Debian 安装程序的参数"

#~ msgid ""
#~ "The installation system recognizes a few additional boot "
#~ "parameters<footnote> <para> With current kernels (2.6.9 or newer) you can "
#~ "use 32 command line options and 32 environment options. If these numbers "
#~ "are exceeded, the kernel will panic. </para> </footnote> which may be "
#~ "useful."
#~ msgstr ""
#~ "安装系统能识别一些额外的引导参数<footnote> <para> 当前的内核(2.6.9 或更"
#~ "新)，您可以使用 32 个命令行参数和 32 个环境变量选项。如果超出，内核将会崩"
#~ "溃。</para> </footnote>，它们很有用。"

#~ msgid "debconf/priority"
#~ msgstr "debconf/priority"

#~ msgid ""
#~ "This parameter sets the lowest priority of messages to be displayed. "
#~ "Short form: <userinput>priority</userinput>"
#~ msgstr ""
#~ "这些参数设置将设置显示的信息为最低的级别。简写: <userinput>priority</"
#~ "userinput>"

#~ msgid ""
#~ "The default installation uses <userinput>priority=high</userinput>. This "
#~ "means that both high and critical priority messages are shown, but medium "
#~ "and low priority messages are skipped. If problems are encountered, the "
#~ "installer adjusts the priority as needed."
#~ msgstr ""
#~ "缺省安装使用 <userinput>priority=high</userinput> 。这意味着高优先级的和至"
#~ "关重要的信息将被显示，但是中级和低级信息将被跳过。如果其间出现了问题，安装"
#~ "程序将按照要求调整优先级别。"

#~ msgid ""
#~ "If you add <userinput>priority=medium</userinput> as boot parameter, you "
#~ "will be shown the installation menu and gain more control over the "
#~ "installation. When <userinput>priority=low</userinput> is used, all "
#~ "messages are shown (this is equivalent to the <emphasis>expert</emphasis> "
#~ "boot method). With <userinput>priority=critical</userinput>, the "
#~ "installation system will display only critical messages and try to do the "
#~ "right thing without fuss."
#~ msgstr ""
#~ "如果您加入 <userinput>priority=medium</userinput> 作为引导参数，将看到安装"
#~ "菜单以及安装过程中更多的控制。当使用 <userinput>priority=low</userinput>，"
#~ "将显示所有的消息(这相当于采用 <emphasis>export</emphasis> 引导方法)。通过 "
#~ "<userinput>priority=critical</userinput>，安装系统只会显示至关重要的信息，"
#~ "并且尝试正确无误地执行各项事宜。"

#~ msgid "DEBIAN_FRONTEND"
#~ msgstr "DEBIAN_FRONTEND"

#, fuzzy
#~ msgid ""
#~ "This boot parameter controls the type of user interface used for the "
#~ "installer. The current possible parameter settings are: <itemizedlist> "
#~ "<listitem> <para><userinput>DEBIAN_FRONTEND=noninteractive</userinput></"
#~ "para> </listitem><listitem> <para><userinput>DEBIAN_FRONTEND=text</"
#~ "userinput></para> </listitem><listitem> "
#~ "<para><userinput>DEBIAN_FRONTEND=newt</userinput></para> </"
#~ "listitem><listitem> <para><userinput>DEBIAN_FRONTEND=gtk</userinput></"
#~ "para> </listitem> </itemizedlist> The default frontend is "
#~ "<userinput>DEBIAN_FRONTEND=newt</userinput>. "
#~ "<userinput>DEBIAN_FRONTEND=text</userinput> may be preferable for serial "
#~ "console installs. Generally only the <userinput>newt</userinput> frontend "
#~ "is available on default install media. On architectures which support it, "
#~ "the graphical installer uses the <userinput>gtk</userinput> frontend."
#~ msgstr ""
#~ "这个引导参数控制用于安装程序的用户界面的类型。当前可能参数设置可以是： "
#~ "<itemizedlist> <listitem> "
#~ "<para><userinput>DEBIAN_FRONTEND=noninteractive</userinput></para> </"
#~ "listitem><listitem> <para><userinput>DEBIAN_FRONTEND=text</userinput></"
#~ "para> </listitem><listitem> <para><userinput>DEBIAN_FRONTEND=newt</"
#~ "userinput></para> </listitem><listitem> "
#~ "<para><userinput>DEBIAN_FRONTEND=slang</userinput></para> </"
#~ "listitem><listitem> <para><userinput>DEBIAN_FRONTEND=ncurses</userinput></"
#~ "para> </listitem><listitem> <para><userinput>DEBIAN_FRONTEND=bogl</"
#~ "userinput></para> </listitem><listitem> "
#~ "<para><userinput>DEBIAN_FRONTEND=gtk</userinput></para> </"
#~ "listitem><listitem> <para><userinput>DEBIAN_FRONTEND=corba</userinput></"
#~ "para> </listitem> </itemizedlist> 缺省的前端是 "
#~ "<userinput>DEBIAN_FRONTEND=newt</userinput>。"
#~ "<userinput>DEBIAN_FRONTEND=text</userinput> 可以用于串口控制台的安装。一般"
#~ "来说在缺省安装介质上只有 <userinput>newt</userinput> 前端，因此目前这个并"
#~ "非很有用。"

#~ msgid "BOOT_DEBUG"
#~ msgstr "BOOT_DEBUG"

#~ msgid ""
#~ "Setting this boot parameter to 2 will cause the installer's boot process "
#~ "to be verbosely logged. Setting it to 3 makes debug shells available at "
#~ "strategic points in the boot process. (Exit the shells to continue the "
#~ "boot process.)"
#~ msgstr ""
#~ "设置引导参数为 2 会使记录更冗长一些。设置为 3 会在引导过程的特定位置调出 "
#~ "debug shell。(退出 shell 以后会继续引导过程。)"

#~ msgid "BOOT_DEBUG=0"
#~ msgstr "BOOT_DEBUG=0"

#~ msgid "This is the default."
#~ msgstr "此为默认。"

#~ msgid "BOOT_DEBUG=1"
#~ msgstr "BOOT_DEBUG=1"

#~ msgid "More verbose than usual."
#~ msgstr "更多的信息。"

#~ msgid "BOOT_DEBUG=2"
#~ msgstr "BOOT_DEBUG=2"

#~ msgid "Lots of debugging information."
#~ msgstr "大量的调试信息。"

#~ msgid "BOOT_DEBUG=3"
#~ msgstr "BOOT_DEBUG=3"

#~ msgid ""
#~ "Shells are run at various points in the boot process to allow detailed "
#~ "debugging. Exit the shell to continue the boot."
#~ msgstr ""
#~ "在引导过程中，安装程序将在多处不同地方运行 Shell，以进行细节上的调试。退"
#~ "出 Shell 将继续引导过程。"

#~ msgid "INSTALL_MEDIA_DEV"
#~ msgstr "INSTALL_MEDIA_DEV"

#~ msgid ""
#~ "The value of the parameter is the path to the device to load the Debian "
#~ "installer from. For example, <userinput>INSTALL_MEDIA_DEV=/dev/floppy/0</"
#~ "userinput>"
#~ msgstr ""
#~ "参数的值将为用来装入 Debian 安装程序的设备路径，例如： "
#~ "<userinput>INSTALL_MEDIA_DEV=/dev/floppy/0</userinput>"

#~ msgid ""
#~ "The boot floppy, which normally scans all floppies it can to find the "
#~ "root floppy, can be overridden by this parameter to only look at the one "
#~ "device."
#~ msgstr ""
#~ "引导软盘，它通常会扫描所有的软盘来找到根软盘，可以通过此参数设置只查找一个"
#~ "设备。"

#~ msgid "debian-installer/framebuffer"
#~ msgstr "debian-installer/framebuffer"

#~ msgid ""
#~ "Some architectures use the kernel framebuffer to offer installation in a "
#~ "number of languages. If framebuffer causes a problem on your system you "
#~ "can disable the feature by the parameter <userinput>debian-installer/"
#~ "framebuffer=false</userinput>, or <userinput>fb=false</userinput> for "
#~ "short. Problem symptoms are error messages about bterm or bogl, a blank "
#~ "screen, or a freeze within a few minutes after starting the install."
#~ msgstr ""
#~ "一些体系使用内核帧缓存以提供不同的语言安装。如果帧缓存在您的系统上面有问"
#~ "题，您可以通过参数 <userinput>framebuffer=false</userinput>，简写 "
#~ "<userinput>fb=false</userinput> 关闭这个特性。这方面问题的特征是有关 "
#~ "bterm 或者 bogl 的错误信息，一个空白的屏幕，或者在开始安装几分钟后停止。"

#~ msgid ""
#~ "The <userinput>video=vga16:off</userinput> argument may also be used to "
#~ "disable the kernel's use of the framebuffer. Such problems have been "
#~ "reported on a Dell Inspiron with Mobile Radeon card."
#~ msgstr ""
#~ "<userinput>video=vga16:off</userinput> 参数可以被用来取消帧缓存。这些问题"
#~ "在使用 Mobile Radeon 卡的 Dell Inspiron 上面被发现。"

#~ msgid "Such problems have been reported on the Amiga 1200 and SE/30."
#~ msgstr "在 Amiga 1200 and SE/30 上面报告过具有有这些方面的问题。"

#~ msgid "Such problems have been reported on hppa."
#~ msgstr "在 hppa 上面报告过存在这些问题。"

#~ msgid ""
#~ "Because of display problems on some systems, framebuffer support is "
#~ "<emphasis>disabled by default</emphasis> for &arch-title;. This can "
#~ "result in ugly display on systems that do properly support the "
#~ "framebuffer, like those with ATI graphical cards. If you see display "
#~ "problems in the installer, you can try booting with parameter "
#~ "<userinput>debian-installer/framebuffer=true</userinput> or "
#~ "<userinput>fb=true</userinput> for short."
#~ msgstr ""
#~ "由于某些系统上显示有问题，framebuffer 的支持在 &arch-title; 上<emphasis>默"
#~ "认是禁止的</emphasis>。这让能良好支持 framebuffer 的系统显示得很丑陋，比如"
#~ "那些采用 ATI 图形卡的系统。如果您在安装程序中遇到显示问题，可以试着在引导"
#~ "时使用参数 <userinput>debian-installer/framebuffer=true</userinput> 或简写"
#~ "为 <userinput>fb=true</userinput>。"

#~ msgid "debian-installer/theme"
#~ msgstr "debian-installer/theme"

#~ msgid ""
#~ "A theme determines how the user interface of the installer looks (colors, "
#~ "icons, etc.). What themes are available differs per frontend. Currently "
#~ "both the newt and gtk frontends only have a <quote>dark</quote> theme "
#~ "that was designed for visually impaired users. Set the theme by booting "
#~ "with parameter <userinput>debian-installer/theme=<replaceable>dark</"
#~ "replaceable></userinput> or <userinput>theme=<replaceable>dark</"
#~ "replaceable></userinput>."
#~ msgstr ""
#~ "theme 决定安装程序用户界面的外观(颜色，图标等。)。不同的前端(frontend)有不"
#~ "同的 theme。当前 newt 和 gtk 前端只有一个 <quote>dark</quote> theme 提供给"
#~ "视觉受损的用户。them 可以在启动的时候通过 <userinput>debian-installer/"
#~ "theme=<replaceable>dark</replaceable></userinput> 或 "
#~ "<userinput>theme=<replaceable>dark</replaceable></userinput> 设置。"

#~ msgid "debian-installer/probe/usb"
#~ msgstr "debian-installer/probe/usb"

#~ msgid ""
#~ "Set to <userinput>false</userinput> to prevent probing for USB on boot, "
#~ "if that causes problems."
#~ msgstr ""
#~ "设置成 <userinput>false</userinput> 可以阻止在引导的时候进行 USB 探测来杜"
#~ "绝引起的问题。"

#~ msgid "netcfg/disable_dhcp"
#~ msgstr "netcfg/disable_dhcp"

#~ msgid ""
#~ "By default, the &d-i; automatically probes for network configuration via "
#~ "DHCP. If the probe succeeds, you won't have a chance to review and change "
#~ "the obtained settings. You can get to the manual network setup only in "
#~ "case the DHCP probe fails."
#~ msgstr ""
#~ "缺省情况下，&d-i; 会通过 DHCP 来自动检测网络。如果检测成功的话，您将不需要"
#~ "审视并且改变其获得的设定。您可以在 DHCP 检测失败的情况下手工配置网络。"

#~ msgid ""
#~ "If you have a DHCP server on your local network, but want to avoid it "
#~ "because e.g. it gives wrong answers, you can use the parameter "
#~ "<userinput>netcfg/disable_dhcp=true</userinput> to prevent configuring "
#~ "the network with DHCP and to enter the information manually."
#~ msgstr ""
#~ "如果您的网络上面具备一台 DHCP 服务器，但是不想使用它，比如，因为它给出错误"
#~ "的答案。您可以使用参数 <userinput>netcfg/disable_dhcp=true</userinput> 来"
#~ "通过 DHCP 来配置网络并且手工输入参数。"

#~ msgid "hw-detect/start_pcmcia"
#~ msgstr "hw-detect/start_pcmcia"

#~ msgid ""
#~ "Set to <userinput>false</userinput> to prevent starting PCMCIA services, "
#~ "if that causes problems. Some laptops are well known for this misbehavior."
#~ msgstr ""
#~ "设置成 <userinput>false</userinput> 来阻止启动 PCMCIA 服务，如果其引起各种"
#~ "问题。有些笔记本电脑对此会有错误的行为。"

#~ msgid "preseed/url"
#~ msgstr "preseed/url"

#, fuzzy
#~ msgid ""
#~ "Specify the url to a preconfiguration file to download and use in "
#~ "automating the install. See <xref linkend=\"automatic-install\"/>. Short "
#~ "form: <userinput>url</userinput>."
#~ msgstr ""
#~ "指定 url 到预设文件，在安装中自动下载和使用。参阅 <xref linkend="
#~ "\"automatic-install\"/>。简写: <userinput>url</userinput>。"

#~ msgid "preseed/file"
#~ msgstr "preseed/file"

#, fuzzy
#~ msgid ""
#~ "Specify the path to a preconfiguration file to load to automating the "
#~ "install. See <xref linkend=\"automatic-install\"/>. Short form: "
#~ "<userinput>file</userinput>."
#~ msgstr ""
#~ "指定路径至预设文件，加载自动化安装。参阅 <xref linkend=\"automatic-install"
#~ "\"/>。简写: <userinput>file</userinput>"

#~ msgid "auto-install/enabled"
#~ msgstr "auto-install/enabled"

#~ msgid ""
#~ "Delay questions that are normally asked before preseeding is possible "
#~ "until after the network is configured. Short form: <userinput>auto=true</"
#~ "userinput> See <xref linkend=\"preseed-auto\"/> for details about using "
#~ "this to automate installs."
#~ msgstr ""
#~ "延迟通常在预置之前的提问，到网络设置完毕。简单形式：<userinput>auto=true</"
#~ "userinput> 参阅 <xref linkend=\"preseed-auto\"/> 了解自动安装的详细信息。"

#~ msgid "cdrom-detect/eject"
#~ msgstr "cdrom-detect/eject"

#~ msgid ""
#~ "By default, before rebooting, &d-i; automatically ejects the optical "
#~ "media used during the installation. This can be unnecessary if the system "
#~ "does not automatically boot off the CD. In some cases it may even be "
#~ "undesirable, for example if the optical drive cannot reinsert the media "
#~ "itself and the user is not there to do it manually. Many slot loading, "
#~ "slim-line, and caddy style drives cannot reload media automatically."
#~ msgstr ""
#~ "在重启前，&d-i; 默认自动弹出安装时的光学媒介。如果系统不是自动从 CD 引导，"
#~ "这不是必要的操作。在某些情况下，这反而不便，例如，如果光驱不能自动插入盘"
#~ "片，用户又不在旁边操作。许多 slot loading, slim-line 和 caddy 类型的驱动器"
#~ "不能自动重新加载介质。"

#~ msgid ""
#~ "Set to <userinput>false</userinput> to disable automatic ejection, and be "
#~ "aware that you may need to ensure that the system does not automatically "
#~ "boot from the optical drive after the initial installation."
#~ msgstr ""
#~ "设为 <userinput>false</userinput> 可以禁止自动弹出，但要小心确保系统在安装"
#~ "完后，不会自动从光盘引导。"

#~ msgid "ramdisk_size"
#~ msgstr "ramdisk_size"

#~ msgid "If you are using a 2.2.x kernel, you may need to set &ramdisksize;."
#~ msgstr "如果您在使用 2.2.x 内核，也许需要设置 &ramdisksize;。"

#~ msgid "mouse/left"
#~ msgstr "mouse/left"

#~ msgid ""
#~ "For the gtk frontend (graphical installer), users can switch the mouse to "
#~ "left-handed operation by setting this parameter to <userinput>true</"
#~ "userinput>."
#~ msgstr ""
#~ "对于 gtk 前端(图形界面安装程序)，用户可以通过将此参数设置为 "
#~ "<userinput>true</userinput> 切换成左手使用鼠标。"

#~ msgid "directfb/hw-accel"
#~ msgstr "directfb/hw-accel"

#~ msgid ""
#~ "For the gtk frontend (graphical installer), hardware acceleration in "
#~ "directfb is disabled by default. To enable it, set this parameter to "
#~ "<userinput>true</userinput> when booting the installer."
#~ msgstr ""
#~ "对于 gtk 前端(图形界面安装程序)，默认时 directfb 的图形加速关闭。要打开"
#~ "它，可以在启动安装程序的时候设置参数为 <userinput>true</userinput>。"

#~ msgid "rescue/enable"
#~ msgstr "rescue/enable"

#~ msgid ""
#~ "Set to <userinput>true</userinput> to enter rescue mode rather than "
#~ "performing a normal installation. See <xref linkend=\"rescue\"/>."
#~ msgstr ""
#~ "设为 <userinput>true</userinput> 进入 rescue 模式，而不是执行普通安装。参"
#~ "阅 <xref linkend=\"rescue\"/>。"

#, fuzzy
#~ msgid "Using boot parameters to answer questions"
#~ msgstr "给内核模块传递参数"

#, fuzzy
#~ msgid "debian-installer/locale"
#~ msgstr "debian-installer/theme"

#~ msgid "Passing parameters to kernel modules"
#~ msgstr "给内核模块传递参数"

#~ msgid ""
#~ "If drivers are compiled into the kernel, you can pass parameters to them "
#~ "as described in the kernel documentation. However, if drivers are "
#~ "compiled as modules and because kernel modules are loaded a bit "
#~ "differently during an installation than when booting an installed system, "
#~ "it is not possible to pass parameters to modules as you would normally "
#~ "do. Instead, you need to use a special syntax recognized by the installer "
#~ "which will then make sure that the parameters are saved in the proper "
#~ "configuration files and will thus be used when the modules are actually "
#~ "loaded. The parameters will also be propagated automatically to the "
#~ "configuration for the installed system."
#~ msgstr ""
#~ "假如驱动程序编译进内核，您可以像内核文档所说的那样向内核传递参数。然而，如"
#~ "果驱动编译为模块，而且由于安装过程与运行系统加载模块方式不同，无法像平时那"
#~ "样传递参数到模块。因此，您需要使用安装程序所识别的特殊语法，它们将确保参数"
#~ "能保存到合适的配置文件，并在模块加载的时候使用。这些参数并能自动应用到安装"
#~ "后系统的配置中。"

#~ msgid ""
#~ "Note that it is now quite rare that parameters need to be passed to "
#~ "modules. In most cases the kernel will be able to probe the hardware "
#~ "present in a system and set good defaults that way. However, in some "
#~ "situations it may still be needed to set parameters manually."
#~ msgstr ""
#~ "注意，现在参数很少需要传递到模块。多数情况下，内核将侦测当前系统中的硬件，"
#~ "并很好地设置默认参数。然而，某些情况下还是需要手动设置参数。"

#~ msgid ""
#~ "The syntax to use to set parameters for modules is: "
#~ "<informalexample><screen>\n"
#~ "<replaceable>module_name</replaceable>.<replaceable>parameter_name</"
#~ "replaceable>=<replaceable>value</replaceable>\n"
#~ "</screen></informalexample> If you need to pass multiple parameters to "
#~ "the same or different modules, just repeat this. For example, to set an "
#~ "old 3Com network interface card to use the BNC (coax) connector and IRQ "
#~ "10, you would pass:"
#~ msgstr ""
#~ "设置模块参数的语法为：<informalexample><screen>\n"
#~ "<replaceable>module_name</replaceable>.<replaceable>parameter_name</"
#~ "replaceable>=<replaceable>value</replaceable>\n"
#~ "</screen></informalexample> 如果您需要传递多个参数给相同或不同的模块，重复"
#~ "上面内容即可。例如，设置老式的 3Com 网卡要使用 BNC (coax) 端子和 IRQ 10，"
#~ "要使用："

#~ msgid "3c509.xcvr=3 3c509.irq=10"
#~ msgstr "3c509.xcvr=3 3c509.irq=10"

#~ msgid "Troubleshooting the Installation Process"
#~ msgstr "安装过程中的故障修复"

#~ msgid "CD-ROM Reliability"
#~ msgstr "CD-ROM 的可靠性"

#~ msgid ""
#~ "Sometimes, especially with older CD-ROM drives, the installer may fail to "
#~ "boot from a CD-ROM. The installer may also &mdash; even after booting "
#~ "successfully from CD-ROM &mdash; fail to recognize the CD-ROM or return "
#~ "errors while reading from it during the installation."
#~ msgstr ""
#~ "有时，特别是旧的 CD-ROM 驱动器，安装将无法从 CD-ROM 引导。安装程序可能 "
#~ "&mdash; 即使是从 CD-ROM 成功引导 &mdash; 无法识别 CD-ROM 或在安装时读取错"
#~ "误。"

#~ msgid ""
#~ "There are a many different possible causes for these problems. We can "
#~ "only list some common issues and provide general suggestions on how to "
#~ "deal with them. The rest is up to you."
#~ msgstr ""
#~ "造成这些问题有各种原因。我们只列出了常见的，并提供解决这些问题的一般方法。"
#~ "余下由您来处理。"

#~ msgid "There are two very simple things that you should try first."
#~ msgstr "您首先应试试两种最简单的方法。"

#~ msgid ""
#~ "If the CD-ROM does not boot, check that it was inserted correctly and "
#~ "that it is not dirty."
#~ msgstr "如果 CD-ROM 没有引导，检查一下它是否放好，并且没有弄脏。"

#~ msgid ""
#~ "If the installer fails to recognize a CD-ROM, try just running the option "
#~ "<menuchoice> <guimenuitem>Detect and mount CD-ROM</guimenuitem> </"
#~ "menuchoice> a second time. Some DMA related issues with older CD-ROM "
#~ "drives are known to be resolved in this way."
#~ msgstr ""
#~ "如果安装程序无法识别 CD-ROM，再次运行 <menuchoice> <guimenuitem>Detect "
#~ "and mount CD-ROM</guimenuitem> </menuchoice> 选项。有些旧 CD-ROM 驱动器 "
#~ "DMA 相关的问题可以用这种方法解决。"

#~ msgid ""
#~ "If this does not work, then try the suggestions in the subsections below. "
#~ "Most, but not all, suggestions discussed there are valid for both CD-ROM "
#~ "and DVD, but we'll use the term CD-ROM for simplicity."
#~ msgstr ""
#~ "如果还无法工作，试试下一节建议的方法。多数情况下，但非全部，那里的建议适用"
#~ "于 CD-ROM 和 DVD，为了简单，只说了 CD-ROM。"

#~ msgid ""
#~ "If you cannot get the installation working from CD-ROM, try one of the "
#~ "other installation methods that are available."
#~ msgstr "如果您用 CD-ROM 无法安装，试试其他可用的安装方法。"

#~ msgid "Common issues"
#~ msgstr "常见问题"

#~ msgid ""
#~ "Some older CD-ROM drives do not support reading from discs that were "
#~ "burned at high speeds using a modern CD writer."
#~ msgstr "有些老 CD-ROM 驱动器不能读取新 CD 刻录机的高速模式下刻录的光盘。"

#~ msgid ""
#~ "If your system boots correctly from the CD-ROM, it does not necessarily "
#~ "mean that Linux also supports the CD-ROM (or, more correctly, the "
#~ "controller that your CD-ROM drive is connected to)."
#~ msgstr ""
#~ "如果您的系统可以从 CD-ROM 引导，这并不是说 Linux 就能支持该 CD-ROM (或者，"
#~ "更准确一点，CD-ROM 驱动器所连接的控制器)。"

#~ msgid ""
#~ "Some older CD-ROM drives do not work correctly if <quote>direct memory "
#~ "access</quote> (DMA) is enabled."
#~ msgstr ""
#~ "一些老式的 CD-ROM 驱动器在 <quote>direct memory access</quote> (DMA) 下无"
#~ "法正常工作。"

#~ msgid "How to investigate and maybe solve issues"
#~ msgstr "如何调查研究或许可以解决问题"

#~ msgid "If the CD-ROM fails to boot, try the suggestions listed below."
#~ msgstr "如果从 CD-ROM 引导失败，试试下面所列的建议。"

#~ msgid ""
#~ "Check that your BIOS actually supports booting from CD-ROM (older systems "
#~ "possibly don't) and that your CD-ROM drive supports the media you are "
#~ "using."
#~ msgstr ""
#~ "检查您的 BIOS 的确支持从 CD-ROM 启动(旧的系统可能不行)，并且 CD-ROM 驱动器"
#~ "支持您所使用的介质。"

#~ msgid ""
#~ "If you downloaded an iso image, check that the md5sum of that image "
#~ "matches the one listed for the image in the <filename>MD5SUMS</filename> "
#~ "file that should be present in the same location as where you downloaded "
#~ "the image from. <informalexample><screen>\n"
#~ "$ md5sum <replaceable>debian-testing-i386-netinst.iso</replaceable>\n"
#~ "a20391b12f7ff22ef705cee4059c6b92  <replaceable>debian-testing-i386-"
#~ "netinst.iso</replaceable>\n"
#~ "</screen></informalexample> Next, check that the md5sum of the burned CD-"
#~ "ROM matches as well. The following command should work. It uses the size "
#~ "of the image to read the correct number of bytes from the CD-ROM."
#~ msgstr ""
#~ "如果您下载的是 iso 映像，检查映像的 md5sum 是否与 <filename>MD5SUMS</"
#~ "filename> 文件所列相同，该文件和您下载的映像在同一个地方。"
#~ "<informalexample><screen>\n"
#~ "$ md5sum <replaceable>debian-testing-i386-netinst.iso</replaceable>\n"
#~ "a20391b12f7ff22ef705cee4059c6b92  <replaceable>debian-testing-i386-"
#~ "netinst.iso</replaceable>\n"
#~ "</screen></informalexample> 然后，检验所刻录 CD-ROM 的 md5sum 也匹配。可以"
#~ "使用下面的命令。它使用映像的尺寸从 CD-ROM 读取正确的字节数。"

#~ msgid ""
#~ "$ dd if=/dev/cdrom | \\\n"
#~ "> head -c `stat --format=%s <replaceable>debian-testing-i386-netinst.iso</"
#~ "replaceable>` | \\\n"
#~ "> md5sum\n"
#~ "a20391b12f7ff22ef705cee4059c6b92  -\n"
#~ "262668+0 records in\n"
#~ "262668+0 records out\n"
#~ "134486016 bytes (134 MB) copied, 97.474 seconds, 1.4 MB/s"
#~ msgstr ""
#~ "$ dd if=/dev/cdrom | \\\n"
#~ "> head -c `stat --format=%s <replaceable>debian-testing-i386-netinst.iso</"
#~ "replaceable>` | \\\n"
#~ "> md5sum\n"
#~ "a20391b12f7ff22ef705cee4059c6b92  -\n"
#~ "262668+0 records in\n"
#~ "262668+0 records out\n"
#~ "134486016 bytes (134 MB) copied, 97.474 seconds, 1.4 MB/s"

#~ msgid ""
#~ "If, after the installer has been booted successfully, the CD-ROM is not "
#~ "detected, sometimes simply trying again may solve the problem. If you "
#~ "have more than one CD-ROM drive, try changing the CD-ROM to the other "
#~ "drive. If that does not work or if the CD-ROM is recognized but there are "
#~ "errors when reading from it, try the suggestions listed below. Some basic "
#~ "knowledge of Linux is required for this. To execute any of the commands, "
#~ "you should first switch to the second virtual console (VT2) and activate "
#~ "the shell there."
#~ msgstr ""
#~ "假如在安装程序正常的引导之后，无法识别 CD-ROM，有时只需再试一次就能解决问"
#~ "题。如果您有多个 CD-ROM 驱动器，将 CD-ROM 放到其他的驱动器。如果无法工作，"
#~ "或者可以识别 CD-ROM 但读取的时候有错误，试试下面所列的建议。这里需要一些基"
#~ "本的 Linux 知识。要执行命令，您应该首先切换到第二虚拟控制台(VT2)，并激活 "
#~ "shell。"

#~ msgid ""
#~ "Switch to VT4 or view the contents of <filename>/var/log/syslog</"
#~ "filename> (use <command>nano</command> as editor) to check for any "
#~ "specific error messages. After that, also check the output of "
#~ "<command>dmesg</command>."
#~ msgstr ""
#~ "切换到 VT4 或查看 <filename>/var/log/syslog</filename> 的内容(使用 "
#~ "<command>nano</command> 作为编辑器)来检查任何特定的错误信息。之后，再检查 "
#~ "<command>dmesg</command> 的输出。"

#, fuzzy
#~ msgid ""
#~ "Check in the output of <command>dmesg</command> if your CD-ROM drive was "
#~ "recognized. You should see something like (the lines do not necessarily "
#~ "have to be consecutive): <informalexample><screen>\n"
#~ "Probing IDE interface ide1...\n"
#~ "hdc: TOSHIBA DVD-ROM SD-R6112, ATAPI CD/DVD-ROM drive\n"
#~ "ide1 at 0x170-0x177,0x376 on irq 15\n"
#~ "hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)\n"
#~ "Uniform CD-ROM driver Revision: 3.20\n"
#~ "</screen></informalexample> If you don't see something like that, chances "
#~ "are the controller your CD-ROM is connected to was not recognized or may "
#~ "be not supported at all. If you know what driver is needed for the "
#~ "controller, you can try loading it manually using <command>modprobe</"
#~ "command>."
#~ msgstr ""
#~ "如果您的 CD-ROM 驱动器可以识别，检查 <command>dmesg</command> 的输出。您可"
#~ "以看到类似的信息(这些行不必是连续出现的)：<informalexample><screen>\n"
#~ "Probing IDE interface ide1...\n"
#~ "hdc: TOSHIBA DVD-ROM SD-R6112, ATAPI CD/DVD-ROM drive\n"
#~ "ide1 at 0x170-0x177,0x376 on irq 15\n"
#~ "hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)\n"
#~ "Uniform CD-ROM driver Revision: 3.20\n"
#~ "</screen></informalexample> 如果您看不到这些，估计是您的 CD-ROM 驱动器所连"
#~ "的控制器无法被识别，或者不完全支持。如果您知道驱动器所需的驱动程序，可以使"
#~ "用 <command>modprobe</command> 手动加载。"

#~ msgid ""
#~ "Check that there is a device node for your CD-ROM drive under <filename>/"
#~ "dev/</filename>. In the example above, this would be <filename>/dev/hdc</"
#~ "filename>. There should also be a <filename>/dev/cdroms/cdrom0</filename>."
#~ msgstr ""
#~ "检查 <filename>/dev/</filename> 下面您 CD-ROM 驱动器对应的设备节点。上面的"
#~ "例子中，它是 <filename>/dev/hdc</filename>。也会是 <filename>/dev/cdroms/"
#~ "cdrom0</filename>。"

#~ msgid ""
#~ "Use the <command>mount</command> command to check if the CD-ROM is "
#~ "already mounted; if not, try mounting it manually: "
#~ "<informalexample><screen>\n"
#~ "$ mount /dev/<replaceable>hdc</replaceable> /cdrom\n"
#~ "</screen></informalexample> Check if there are any error messages after "
#~ "that command."
#~ msgstr ""
#~ "用 <command>mount</command> 命令检查 the CD-ROM 是否已经挂载；如果没有，使"
#~ "用手动挂载：<informalexample><screen>\n"
#~ "$ mount /dev/<replaceable>hdc</replaceable> /cdrom\n"
#~ "</screen></informalexample> 检查命令后面是否有什么错误信息。"

#, fuzzy
#~ msgid ""
#~ "Check if DMA is currently enabled: <informalexample><screen>\n"
#~ "$ cd /proc/<replaceable>ide</replaceable>/<replaceable>hdc</replaceable>\n"
#~ "$ grep using_dma settings\n"
#~ "using_dma      1       0       1       rw\n"
#~ "</screen></informalexample> A <quote>1</quote> in the first column after "
#~ "<literal>using_dma</literal> means it is enabled. If it is, try disabling "
#~ "it: <informalexample><screen>\n"
#~ "$ echo -n \"using_dma:0\" >settings\n"
#~ "</screen></informalexample> Make sure that you are in the directory for "
#~ "the device that corresponds to your CD-ROM drive."
#~ msgstr ""
#~ "简单当前 DMA 已经打开：<informalexample><screen>\n"
#~ "$ cd /proc/<replaceable>ide</replaceable>/<replaceable>hdc</replaceable>\n"
#~ "$ grep dma settings\n"
#~ "using_dma      1       0       1       rw\n"
#~ "</screen></informalexample> <quote>1</quote> 意味着打开。如果是这样，将其"
#~ "关闭：<informalexample><screen>\n"
#~ "$ echo -n \"using_dma:0\" >settings\n"
#~ "</screen></informalexample> 确保您所处的目录对应 CD-ROM 驱动器。"

#~ msgid ""
#~ "If there are any problems during the installation, try checking the "
#~ "integrity of the CD-ROM using the option near the bottom of the "
#~ "installer's main menu. This option can also be used as a general test if "
#~ "the CD-ROM can be read reliably."
#~ msgstr ""
#~ "如果安装过程中有什么问题，用接近安装程序主菜单底部的选项检查 CD-ROM 的完整"
#~ "性。如果 CD-ROM 可以读，该选项可以对其进行测试。"

#~ msgid "Floppy Disk Reliability"
#~ msgstr "软盘的可靠性"

#~ msgid ""
#~ "The biggest problem for people using floppy disks to install Debian seems "
#~ "to be floppy disk reliability."
#~ msgstr ""
#~ "对于用软盘安装 Debian 的人来说，他们遇到的最大的问题很可能是软盘的可靠性。"

#~ msgid ""
#~ "The boot floppy is the floppy with the worst problems, because it is read "
#~ "by the hardware directly, before Linux boots. Often, the hardware doesn't "
#~ "read as reliably as the Linux floppy disk driver, and may just stop "
#~ "without printing an error message if it reads incorrect data. There can "
#~ "also be failures in the driver floppies, most of which indicate "
#~ "themselves with a flood of messages about disk I/O errors."
#~ msgstr ""
#~ "因为引导软盘是在 Linux 引导之前由硬件直接读取，是问题最多的软盘。通常，硬"
#~ "件的读取并不能像 Linux 软盘驱动那样可靠，并且对读到错误的数据，它们只会停"
#~ "止运行，连条错误消息也不会显示。驱动软盘也会出错，很多时候只是打印出一堆 "
#~ "I/O 错误信息。"

#~ msgid ""
#~ "If you are having the installation stall at a particular floppy, the "
#~ "first thing you should do is write the image to a <emphasis>different</"
#~ "emphasis> floppy and see if that solves the problem. Simply reformatting "
#~ "the old floppy may not be sufficient, even if it appears that the floppy "
#~ "was reformatted and written with no errors. It is sometimes useful to try "
#~ "writing the floppy on a different system."
#~ msgstr ""
#~ "如果在某个软盘上遇到安装停止，您首先要做的，是把映像重新写到<emphasis>另外"
#~ "</emphasis>一张软盘上，看看是否解决问题。仅格式化旧软盘是不够的，即使它重"
#~ "新格式化以后看起来没有错误。如果可能，在别的统上重写这些软盘更好一些。"

#~ msgid ""
#~ "One user reports he had to write the images to floppy <emphasis>three</"
#~ "emphasis> times before one worked, and then everything was fine with the "
#~ "third floppy."
#~ msgstr ""
#~ "一个用户报告过他不得不把映像往软盘写<emphasis>三</emphasis>次，只有最后一"
#~ "次的软盘才算工作良好。"

#~ msgid ""
#~ "Normally you should not have to download a floppy image again, but if you "
#~ "are experiencing problems it is always useful to verify that the images "
#~ "were downloaded correctly by verifying their md5sums."
#~ msgstr ""
#~ "一般情况下，您不必重新下载软盘映像，但如果一直有问题，可以通过它们的 "
#~ "md5sum 来检验下载的映像是否正确。"

#~ msgid ""
#~ "Other users have reported that simply rebooting a few times with the same "
#~ "floppy in the floppy drive can lead to a successful boot. This is all due "
#~ "to buggy hardware or firmware floppy drivers."
#~ msgstr ""
#~ "其他一些用户报告过，用同样的软盘重新启动若干次才有一次能成功引导。这都是由"
#~ "于有缺陷的硬件或固件软盘驱动器驱动程序造成的。"

#~ msgid "Boot Configuration"
#~ msgstr "引导配置"

#~ msgid ""
#~ "If you have problems and the kernel hangs during the boot process, "
#~ "doesn't recognize peripherals you actually have, or drives are not "
#~ "recognized properly, the first thing to check is the boot parameters, as "
#~ "discussed in <xref linkend=\"boot-parms\"/>."
#~ msgstr ""
#~ "如果在引导过程中您遇到了问题或者内核挂起，不识别实际拥有的外围设备，或者驱"
#~ "动不能被正确识别，首先要做的事情是检查引导参数，见 <xref linkend=\"boot-"
#~ "parms\"/> 讨论。"

#~ msgid ""
#~ "If you are booting with your own kernel instead of the one supplied with "
#~ "the installer, be sure that <userinput>CONFIG_DEVFS</userinput> is set in "
#~ "your kernel. The installer requires <userinput>CONFIG_DEVFS</userinput>."
#~ msgstr ""
#~ "如果引导的是您自己的内核，而不是安装程序提供的内核，请确定 "
#~ "<userinput>CONFIG_DEVFS</userinput> 已被设置到内核。安装程序需要 "
#~ "<userinput>CONFIG_DEVFS</userinput>。"

#~ msgid ""
#~ "Often, problems can be solved by removing add-ons and peripherals, and "
#~ "then trying booting again. <phrase arch=\"x86\">Internal modems, sound "
#~ "cards, and Plug-n-Play devices can be especially problematic.</phrase>"
#~ msgstr ""
#~ "通常，可以通过移除外挂硬件或者外围设备来解决问题，然后再次重新引导。"
#~ "<phrase arch=\"x86\">内置调制解调器、声卡以及即插即用设备特别容易引起问"
#~ "题。</phrase>"

#~ msgid ""
#~ "If you have a large amount of memory installed in your machine, more than "
#~ "512M, and the installer hangs when booting the kernel, you may need to "
#~ "include a boot argument to limit the amount of memory the kernel sees, "
#~ "such as <userinput>mem=512m</userinput>."
#~ msgstr ""
#~ "如果您的机器上装有多于 512M 的大容量的内存，并且安装程序在引导内核时停止，"
#~ "您可能需要加入一个引导参数，来限制内核能够看到的内存数量，比如 "
#~ "<userinput>mem=512m</userinput>。"

#~ msgid "Common &arch-title; Installation Problems"
#~ msgstr "&arch-title; 常见安装问题"

#~ msgid ""
#~ "There are some common installation problems that can be solved or avoided "
#~ "by passing certain boot parameters to the installer."
#~ msgstr "有一些常见的安装问题，可以通过给安装程序特定的引导参数解决或避免。"

#~ msgid ""
#~ "Some systems have floppies with <quote>inverted DCLs</quote>. If you "
#~ "receive errors reading from the floppy, even when you know the floppy is "
#~ "good, try the parameter <userinput>floppy=thinkpad</userinput>."
#~ msgstr ""
#~ "一些系统的软盘会有 <quote>inverted DCLs</quote>。如果您在读软盘时遇到错误"
#~ "信息，并且知道软盘是好的，请尝试 <userinput>floppy=thinkpad</userinput> 参"
#~ "数。"

#~ msgid ""
#~ "On some systems, such as the IBM PS/1 or ValuePoint (which have ST-506 "
#~ "disk drivers), the IDE drive may not be properly recognized. Again, try "
#~ "it first without the parameters and see if the IDE drive is recognized "
#~ "properly. If not, determine your drive geometry (cylinders, heads, and "
#~ "sectors), and use the parameter <userinput>hd=<replaceable>cylinders</"
#~ "replaceable>,<replaceable>heads</replaceable>,<replaceable>sectors</"
#~ "replaceable></userinput>."
#~ msgstr ""
#~ "在一些系统上，比如 IBM PS/1 或者 ValuePoint (具有 ST-506 驱动器)，IDE 驱动"
#~ "器可能不被识别。请首先尝试没有参数的的引导是否能够被识别。如果不行，请确定"
#~ "驱动器几何参数(柱面，磁头还有扇区)。然后使用参数 "
#~ "<userinput>hd=<replaceable>cylinders</replaceable>,<replaceable>heads</"
#~ "replaceable>,<replaceable>sectors</replaceable></userinput>。"

#~ msgid ""
#~ "If you have a very old machine, and the kernel hangs after saying "
#~ "<computeroutput>Checking 'hlt' instruction...</computeroutput>, then you "
#~ "should try the <userinput>no-hlt</userinput> boot argument, which "
#~ "disables this test."
#~ msgstr ""
#~ "如果您有一台非常老的机器，并且内核在显示 <computeroutput>Checking 'hlt' "
#~ "instruction...</computeroutput> 时中断，需要尝试 <userinput>no-hlt</"
#~ "userinput> 参数来取消这个测试。"

#~ msgid ""
#~ "If your screen begins to show a weird picture while the kernel boots, eg. "
#~ "pure white, pure black or colored pixel garbage, your system may contain "
#~ "a problematic video card which does not switch to the framebuffer mode "
#~ "properly. Then you can use the boot parameter <userinput>fb=false "
#~ "video=vga16:off</userinput> to disable the framebuffer console. Only the "
#~ "English language will be available during the installation due to limited "
#~ "console features. See <xref linkend=\"boot-parms\"/> for details."
#~ msgstr ""
#~ "如果您的显示屏在内核引导的时候显示一个奇怪的图片(比如，纯白，纯黑或者彩色"
#~ "的像素块)，系统可能含有一块有问题的显示卡。它不能切换至帧缓存模式。您可以"
#~ "使用引导参数 <userinput>fb=false</userinput> 或 <userinput>video=vga16:"
#~ "off</userinput> 来取消帧缓存控制台。在这种情况下，由于控制台的限制，在安装"
#~ "过程中只能用英语，请参见 <xref linkend=\"boot-parms\"/> 来获得细节信息。"

#~ msgid "System Freeze During the PCMCIA Configuration Phase"
#~ msgstr "在 PCMCIA 配置阶段系统停止"

#~ msgid ""
#~ "Some laptop models produced by Dell are known to crash when PCMCIA device "
#~ "detection tries to access some hardware addresses. Other laptops may "
#~ "display similar problems. If you experience such a problem and you don't "
#~ "need PCMCIA support during the installation, you can disable PCMCIA using "
#~ "the <userinput>hw-detect/start_pcmcia=false</userinput> boot parameter. "
#~ "You can then configure PCMCIA after the installation is completed and "
#~ "exclude the resource range causing the problems."
#~ msgstr ""
#~ "Dell 笔记本的一些型号，会在 PCMCIA 设备检测程序尝试访问一些硬件地址的时候"
#~ "死机。其他笔记本可能显示类似的问题。如果您遇到那样的问题，并且在安装的时候"
#~ "不需要 PCMCIA 的支持，可以用 <userinput>hw-detect/start_pcmcia=false</"
#~ "userinput> 启动参数来取消 PCMCIA 功能。您可以在安装后配置 PCMCIA，去掉造成"
#~ "问题的资源区段。"

#~ msgid ""
#~ "Alternatively, you can boot the installer in expert mode. You will then "
#~ "be asked to enter the resource range options your hardware needs. For "
#~ "example, if you have one of the Dell laptops mentioned above, you should "
#~ "enter <userinput>exclude port 0x800-0x8ff</userinput> here. There is also "
#~ "a list of some common resource range options in the <ulink url=\"http://"
#~ "pcmcia-cs.sourceforge.net/ftp/doc/PCMCIA-HOWTO-1.html#ss1.12\">System "
#~ "resource settings section of the PCMCIA HOWTO</ulink>. Note that you have "
#~ "to omit the commas, if any, when you enter this value in the installer."
#~ msgstr ""
#~ "或者，您可以启动安装程序时进入高级模式。您需要按照要求输入硬件资源范围选"
#~ "项。比如，您如果有如上所说的 Dell 笔记本问题，应该在这里输入 "
#~ "<userinput>exclude port 0x800-0x8ff</userinput>。在 <ulink url=\"http://"
#~ "pcmcia-cs.sourceforge.net/ftp/doc/PCMCIA-HOWTO-1.html#ss1.12\">System "
#~ "resource settings section of the PCMCIA HOWTO</ulink> 处有一个列表，列出了"
#~ "一些问题的资源范围选项。注意在安装程序中，输入这些值的时候必须忽略逗号。"

#~ msgid "System Freeze while Loading the USB Modules"
#~ msgstr "在装入 USB 模块时系统停止"

#~ msgid ""
#~ "The kernel normally tries to install USB modules and the USB keyboard "
#~ "driver in order to support some non-standard USB keyboards. However, "
#~ "there are some broken USB systems where the driver hangs on loading. A "
#~ "possible workaround may be disabling the USB controller in your mainboard "
#~ "BIOS setup. Another option is passing the <userinput>debian-installer/"
#~ "probe/usb=false</userinput> parameter at the boot prompt, which will "
#~ "prevent the modules from being loaded."
#~ msgstr ""
#~ "内核正常情况下会尝试安装 USB 模块以及 USB 键盘驱动来支持一些非标准的 USB "
#~ "键盘。但是，有些不完整的 USB 系统会在驱动程序装入时死机。一个可能的解决方"
#~ "法是在 BIOS 设置内禁止您的 USB 控制器。或者在引导提示符处传递 "
#~ "<userinput>debian-installer/probe/usb=false</userinput> 参数，这将阻止装入"
#~ "此模块。"

#~ msgid "Interpreting the Kernel Startup Messages"
#~ msgstr "内核起始信息注解"

#~ msgid ""
#~ "During the boot sequence, you may see many messages in the form "
#~ "<computeroutput>can't find <replaceable>something</replaceable> </"
#~ "computeroutput>, or <computeroutput> <replaceable>something</replaceable> "
#~ "not present</computeroutput>, <computeroutput>can't initialize "
#~ "<replaceable>something</replaceable> </computeroutput>, or even "
#~ "<computeroutput>this driver release depends on <replaceable>something</"
#~ "replaceable> </computeroutput>. Most of these messages are harmless. You "
#~ "see them because the kernel for the installation system is built to run "
#~ "on computers with many different peripheral devices. Obviously, no one "
#~ "computer will have every possible peripheral device, so the operating "
#~ "system may emit a few complaints while it looks for peripherals you don't "
#~ "own. You may also see the system pause for a while. This happens when it "
#~ "is waiting for a device to respond, and that device is not present on "
#~ "your system. If you find the time it takes to boot the system "
#~ "unacceptably long, you can create a custom kernel later (see <xref "
#~ "linkend=\"kernel-baking\"/>)."
#~ msgstr ""
#~ "在引导期间，您可以看到很多信息类似 <computeroutput>can't find "
#~ "<replaceable>something</replaceable> </computeroutput>，或者 "
#~ "<computeroutput> <replaceable>something</replaceable> not present</"
#~ "computeroutput>，<computeroutput>can't initialize <replaceable>something</"
#~ "replaceable> </computeroutput>，或者甚至 <computeroutput>this driver "
#~ "release depends on <replaceable>something</replaceable> </"
#~ "computeroutput>。大多数这些信息都是无害的。您之所以看到它们，是因为安装系"
#~ "统内核被设计成为可以运行在不同的计算机，并且拥有不同的外围设备。显然地，没"
#~ "有一个计算机可能拥有所有的外围设备，因此操作系统可能在查找一些您没有的设备"
#~ "上有一些报怨。有时可以看到系统暂停了一段时间。这是由于它在等待一台设备的回"
#~ "应，但是这台设备并没有安装在您的系统上。如果您发现这个时间非常长，您可以一"
#~ "会创建一个自己的内核(参见 <xref linkend=\"kernel-baking\"/>)。"

#~ msgid "Bug Reporter"
#~ msgstr "Bug Reporter"

#~ msgid ""
#~ "If you get through the initial boot phase but cannot complete the "
#~ "install, the bug reporter menu choice may be helpful. It lets you store "
#~ "system error logs and configuration information from the installer to a "
#~ "floppy, or download them in a web browser. This information may provide "
#~ "clues as to what went wrong and how to fix it. If you are submitting a "
#~ "bug report you may want to attach this information to the bug report."
#~ msgstr ""
#~ "如果您过了初始化引导阶段，但还是不能安装，可以借助于 bug 报告菜单选项。它"
#~ "让您保存安装程序的系统错误记录和配置信息到软盘，或者用网络浏览器下载。该信"
#~ "息或许可以提供了一些关于错误的起因和如何解决它的线索。如果您正在提交一个 "
#~ "bug 报告，可以报告里附上该信息。"

#~ msgid ""
#~ "Other pertinent installation messages may be found in <filename>/var/log/"
#~ "</filename> during the installation, and <filename>/var/log/installer/</"
#~ "filename> after the computer has been booted into the installed system."
#~ msgstr ""
#~ "其他安装期间相关的信息可以在 <filename>/var/log/</filename> 内找到，计算机"
#~ "用新安装的系统启动后，放在 <filename>/var/log/debian-installer/</"
#~ "filename> 里。"

#~ msgid "Submitting Installation Reports"
#~ msgstr "提交缺陷报告"

#~ msgid ""
#~ "If you still have problems, please submit an installation report. We also "
#~ "encourage installation reports to be sent even if the installation is "
#~ "successful, so that we can get as much information as possible on the "
#~ "largest number of hardware configurations."
#~ msgstr ""
#~ "如果仍有问题，请提交安装报告。即使已经安装成功，我们也鼓励您发一份安装报"
#~ "告，这让我们可以尽可能多地了解硬件的配置数量。"

#~ msgid ""
#~ "If you have a working Debian system, the easiest way to send an "
#~ "installation report is to install the installation-report and reportbug "
#~ "packages (<command>apt-get install installation-report reportbug</"
#~ "command>) and run the command <command>reportbug installation-report</"
#~ "command>."
#~ msgstr ""
#~ "如果您有一个可以运转的 Debian 系统，发送安装报告最简单的方法是安装 "
#~ "installation-report 和 reportbug 软件包(<command>apt-get install "
#~ "installation-report reportbug</command>)，然后执行 <command>reportbug "
#~ "installation-report</command> 命令。"

#~ msgid ""
#~ "Please use this template when filling out installation reports, and file "
#~ "the report as a bug report against the <classname>installation-reports</"
#~ "classname> pseudo package, by sending it to <email>submit@bugs.debian."
#~ "org</email>. <informalexample><screen>\n"
#~ "Package: installation-reports\n"
#~ "\n"
#~ "Boot method: &lt;How did you boot the installer? CD? floppy? network?"
#~ "&gt;\n"
#~ "Image version: &lt;Full URL to image you downloaded is best&gt;\n"
#~ "Date: &lt;Date and time of the install&gt;\n"
#~ "\n"
#~ "Machine: &lt;Description of machine (eg, IBM Thinkpad R32)&gt;\n"
#~ "Processor:\n"
#~ "Memory:\n"
#~ "Partitions: &lt;df -Tl will do; the raw partition table is preferred&gt;\n"
#~ "\n"
#~ "Output of lspci -nn and lspci -vnn:\n"
#~ "\n"
#~ "Base System Installation Checklist:\n"
#~ "[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it\n"
#~ "\n"
#~ "Initial boot:           [ ]\n"
#~ "Detect network card:    [ ]\n"
#~ "Configure network:      [ ]\n"
#~ "Detect CD:              [ ]\n"
#~ "Load installer modules: [ ]\n"
#~ "Detect hard drives:     [ ]\n"
#~ "Partition hard drives:  [ ]\n"
#~ "Install base system:    [ ]\n"
#~ "Clock/timezone setup:   [ ]\n"
#~ "User/password setup:    [ ]\n"
#~ "Install tasks:          [ ]\n"
#~ "Install boot loader:    [ ]\n"
#~ "Overall install:        [ ]\n"
#~ "\n"
#~ "Comments/Problems:\n"
#~ "\n"
#~ "&lt;Description of the install, in prose, and any thoughts, comments\n"
#~ "      and ideas you had during the initial install.&gt;\n"
#~ "</screen></informalexample> In the bug report, describe what the problem "
#~ "is, including the last visible kernel messages in the event of a kernel "
#~ "hang. Describe the steps that you did which brought the system into the "
#~ "problem state."
#~ msgstr ""
#~ "请采用下列模板填写安装报告，并发邮件到 <email>submit@bugs.debian.org</"
#~ "email> 给 <classname>installation-reports</classname> 虚拟软件包发送 bug "
#~ "报告。<informalexample><screen>\n"
#~ "Package: installation-reports\n"
#~ "\n"
#~ "Boot method: &lt;How did you boot the installer? CD? floppy? network?"
#~ "&gt;\n"
#~ "Image version: &lt;Full URL to image you downloaded is best&gt;\n"
#~ "Date: &lt;Date and time of the install&gt;\n"
#~ "\n"
#~ "Machine: &lt;Description of machine (eg, IBM Thinkpad R32)&gt;\n"
#~ "Processor:\n"
#~ "Memory:\n"
#~ "Partitions: &lt;df -Tl will do; the raw partition table is preferred&gt;\n"
#~ "\n"
#~ "Output of lspci -nn and lspci -vnn:\n"
#~ "\n"
#~ "Base System Installation Checklist:\n"
#~ "[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it\n"
#~ "\n"
#~ "Initial boot:           [ ]\n"
#~ "Detect network card:    [ ]\n"
#~ "Configure network:      [ ]\n"
#~ "Detect CD:              [ ]\n"
#~ "Load installer modules: [ ]\n"
#~ "Detect hard drives:     [ ]\n"
#~ "Partition hard drives:  [ ]\n"
#~ "Install base system:    [ ]\n"
#~ "Clock/timezone setup:   [ ]\n"
#~ "User/password setup:    [ ]\n"
#~ "Install tasks:          [ ]\n"
#~ "Install boot loader:    [ ]\n"
#~ "Overall install:        [ ]\n"
#~ "\n"
#~ "Comments/Problems:\n"
#~ "\n"
#~ "&lt;Description of the install, in prose, and any thoughts, comments\n"
#~ "      and ideas you had during the initial install.&gt;\n"
#~ "</screen></informalexample> 在 bug 报告内，请说明问题所在，包括内核挂起后"
#~ "最后见到的内核消息。描述进入问题状态所进行的步骤。"

#~ msgid ""
#~ "Proceed to the next chapter to continue the installation where you will "
#~ "set up the language locale, network, and the disk partitions."
#~ msgstr "下一章将继续安装过程，在那里您将设置语言区域，网络以及磁盘分区。"