Contents of /trunk/manual/debian/changelog

installation-guide (2006xxxx) UNRELEASED; urgency=low

  [ Joey Hess ]
  * Update kernel building section to conditionalise some more 2.4 kernel
    stuff.
  * Suggest passing --initrd to make-kpkg since the docs say nothing about
    compiling disk drivers into the kernel.
  * Document new passwd/root-login setting.
  * Booting a USB stick via a boot floppy is not supported by current
    installer images.
  * Update preseeding docs to use task names, not short descriptions, since
    that will work now and is more convenient for preseeding.
  * Document the kde-desktop and gnome-desktop subtasks.

  [ Frans Pop ]
  * Various corrections suggested by Clytie Siddall.
  * chroot-install:
    - add /etc/hosts to be created for network configuration (closes: #364517)
    - make kernel/linux-image variable (closes: #345482)
  * Document -- command line option for passing parameters to boot loader
    configuration (closes: #309889).
  * Switch Finnish from XML-based to PO-based translation.
  * Bring numbering and layout of GPL more in line with original. With thanks
    to Holger Wansing.

 -- Frans Pop <fjp@debian.org>  Mon,  1 May 2006 11:22:18 +0200

installation-guide (20060427) unstable; urgency=low

  [ Joey Hess ]
  * Update preseeding docs for base-config removal.
  * Add documentation of how to change apt-setup security source with
    preseeding.
  * Remove the sarge preseeding docs.
  * Remove mentions of base-config and move base-config stuff to elsewhere.
  * Add documentation of apt-setup, user-setup, clock-setup, tzsetup, and
    pkgsel.
  * Change some references to tty3 (messages) to instead refer to tty4
    (syslog).
  * Change references to /var/log/debian-installer to just /var/log/installer.
  * Remove docs for baseconfig-udeb; going away with base-config.
  * Removed various bits of sarge cruft when it made things easier.

  [ Frans Pop ]
  * Change default build to Etch.
  * Remove all Sarge specific content and make Etch specific content default.
  * Delete some obsolete entities.
  * Change references from package d-i-manual to package installation-guide.
  * Explicitly specify XML declaration as required by openjade 1.4devel1-15
    (closes: #360241).
  * Update appendix on chroot installs:
    - mention that debootstrap also requires basic Unix/Linux commands;
    - comment out link to outdated rpm packages of debootstrap.

  [ Colin Watson ]
  * Add a few more supports-floppy-boot and bootable-usb conditionals to
    make it easier to turn all this off in rebuilds of the manual.
  * Etch uses X.Org 6.9, and xserver-xorg instead of xserver-xfree86.
  * Document how to pick a particular interface with
    netcfg/choose_interface, including how to do this before reading a
    preseed file.
  * Remove obsolete substvar.
  * Build-depend on libhtml-parser-perl for build/preseed.pl.

  [ Joey Hess ]
  * Add docs about preseeding a fallback to a static IP if dhcp fails.
  * Update copyright date.
  * It's possible to use preseeding to set up LVM now, so remove stuff about
    it not working.
  * Document DHCP preseeding. Note that this documents it as of netcfg 1.24
    and preseed 1.13.

  [ Martin Michlmayr ]
  * Bring ARM up to date with reality: remove unsupported flavours, add
    NSLU2.
  * Fix Netwinder/CATS download location.
  * Improve the Netwinder TFTP boot instructions.
  * The Netwinder firmware is no longer available due to license problems.
  * Mention NSLU2 download location.
  * Describe how to flash the installer image onto the NSLU2.
  * Describe how to boot a Cobalt machine.

  [ Frans Pop ]
  * Document new option to preseed additional apt sources for target system.
  * Document how to create a preconfiguration file.

  [ Frans Pop ]
  * Enable Catalan, Italian and Swedish translations for release.
  * Disable Brazillian Portuguese translation as it is too incomplete.

 -- Frans Pop <fjp@debian.org>  Thu, 27 Apr 2006 03:00:32 +0200

installation-guide (20060102) unstable; urgency=low

  [ Frans Pop ]
  * Fix build error caused by description for s390. Closes: #337382.
  * Update kernel package names and kernel versions per architecture.
  * Move documentation on preseeding to separate appendix for etch.
  * Use new, more flexible perl script to extract example preseed file from
    new appendix.
  * Set proper POT-Creation-Date when generating new POT files.
  * New translations started: Polish, Swedish, Vietnamese.
  * First release of Greek and Korean translations.
  * Exclude Traditional Chinese translation as it was not updated.
  * Switch release name to Etch (3.1+δ).

  [ Joey Hess ]
  * Update installation report template and instructions for etch.

 -- Frans Pop <fjp@debian.org>  Mon,  2 Jan 2006 18:44:59 +0100

installation-guide (20051025) unstable; urgency=low

  * Mention in copyright that full GPL is included in the manual.
    Closes: #334925
  * Register installed documents with doc-base.
  * Minor updates in English text and translations.

 -- Frans Pop <fjp@debian.org>  Tue, 25 Oct 2005 17:37:25 +0200

installation-guide (20051019) unstable; urgency=low

  [ Joey Hess ]
  * Split off from the debian-installer source package.
    See the changelog for debian-installer for older changelog entries.

  [ Frans Pop ]
  * Change over to building arch all packages in section doc. Build separate
    packages for each arch containing all translations.
  * Change package name to installation-guide.
  * Include translations already available on official website.

 -- Frans Pop <fjp@debian.org>  Tue, 18 Oct 2005 17:12:35 +0200
1	fjp	36729	installation-guide (2006xxxx) UNRELEASED; urgency=low
2
3	fjp	36730	[ Joey Hess ]
4			* Update kernel building section to conditionalise some more 2.4 kernel
5			stuff.
6			* Suggest passing --initrd to make-kpkg since the docs say nothing about
7			compiling disk drivers into the kernel.
8	fjp	36805	* Document new passwd/root-login setting.
9			* Booting a USB stick via a boot floppy is not supported by current
10			installer images.
11			* Update preseeding docs to use task names, not short descriptions, since
12			that will work now and is more convenient for preseeding.
13			* Document the kde-desktop and gnome-desktop subtasks.
14	fjp	36729
15	fjp	36732	[ Frans Pop ]
16			* Various corrections suggested by Clytie Siddall.
17	fjp	36758	* chroot-install:
18			- add /etc/hosts to be created for network configuration (closes: #364517)
19			- make kernel/linux-image variable (closes: #345482)
20			* Document -- command line option for passing parameters to boot loader
21			configuration (closes: #309889).
22	fjp	36805	* Switch Finnish from XML-based to PO-based translation.
23	fjp	36858	* Bring numbering and layout of GPL more in line with original. With thanks
24			to Holger Wansing.
25	fjp	36729
26	fjp	36858	-- Frans Pop <fjp@debian.org> Mon, 1 May 2006 11:22:18 +0200
27	fjp	36732
28	fjp	36727	installation-guide (20060427) unstable; urgency=low
29	fjp	33700
30	joeyh	33719	[ Joey Hess ]
31			* Update preseeding docs for base-config removal.
32			* Add documentation of how to change apt-setup security source with
33			preseeding.
34			* Remove the sarge preseeding docs.
35			* Remove mentions of base-config and move base-config stuff to elsewhere.
36	fjp	33725	* Add documentation of apt-setup, user-setup, clock-setup, tzsetup, and
37	joeyh	33719	pkgsel.
38			* Change some references to tty3 (messages) to instead refer to tty4
39			(syslog).
40			* Change references to /var/log/debian-installer to just /var/log/installer.
41			* Remove docs for baseconfig-udeb; going away with base-config.
42			* Removed various bits of sarge cruft when it made things easier.
43	fjp	33700
44	fjp	33725	[ Frans Pop ]
45			* Change default build to Etch.
46			* Remove all Sarge specific content and make Etch specific content default.
47			* Delete some obsolete entities.
48	fjp	33772	* Change references from package d-i-manual to package installation-guide.
49	fjp	36012	* Explicitly specify XML declaration as required by openjade 1.4devel1-15
50			(closes: #360241).
51	fjp	34721	* Update appendix on chroot installs:
52			- mention that debootstrap also requires basic Unix/Linux commands;
53			- comment out link to outdated rpm packages of debootstrap.
54	fjp	33700
55	cjwatson	33885	[ Colin Watson ]
56	cjwatson	33886	* Add a few more supports-floppy-boot and bootable-usb conditionals to
57			make it easier to turn all this off in rebuilds of the manual.
58	cjwatson	33887	* Etch uses X.Org 6.9, and xserver-xorg instead of xserver-xfree86.
59	cjwatson	33890	* Document how to pick a particular interface with
60			netcfg/choose_interface, including how to do this before reading a
61			preseed file.
62	cjwatson	33893	* Remove obsolete substvar.
63	cjwatson	33940	* Build-depend on libhtml-parser-perl for build/preseed.pl.
64	cjwatson	33885
65	joeyh	34168	[ Joey Hess ]
66			* Add docs about preseeding a fallback to a static IP if dhcp fails.
67	joeyh	34719	* Update copyright date.
68	joeyh	35031	* It's possible to use preseeding to set up LVM now, so remove stuff about
69			it not working.
70	joeyh	35032	* Document DHCP preseeding. Note that this documents it as of netcfg 1.24
71			and preseed 1.13.
72	fjp	34713
73	tbm	35300	[ Martin Michlmayr ]
74			* Bring ARM up to date with reality: remove unsupported flavours, add
75			NSLU2.
76	tbm	35301	* Fix Netwinder/CATS download location.
77	tbm	35307	* Improve the Netwinder TFTP boot instructions.
78	tbm	35308	* The Netwinder firmware is no longer available due to license problems.
79	tbm	35302	* Mention NSLU2 download location.
80	tbm	35309	* Describe how to flash the installer image onto the NSLU2.
81	tbm	35310	* Describe how to boot a Cobalt machine.
82	tbm	35300
83	fjp	36007	[ Frans Pop ]
84			* Document new option to preseed additional apt sources for target system.
85	fjp	36204	* Document how to create a preconfiguration file.
86	joeyh	34719
87	fjp	36727	[ Frans Pop ]
88			* Enable Catalan, Italian and Swedish translations for release.
89			* Disable Brazillian Portuguese translation as it is too incomplete.
90	joeyh	36167
91	fjp	36727	-- Frans Pop <fjp@debian.org> Thu, 27 Apr 2006 03:00:32 +0200
92
93	fjp	33677	installation-guide (20060102) unstable; urgency=low
94	fjp	31851
95	joeyh	32251	[ Frans Pop ]
96	fjp	31851	* Fix build error caused by description for s390. Closes: #337382.
97	fjp	33676	* Update kernel package names and kernel versions per architecture.
98	fjp	32424	* Move documentation on preseeding to separate appendix for etch.
99			* Use new, more flexible perl script to extract example preseed file from
100			new appendix.
101	fjp	32665	* Set proper POT-Creation-Date when generating new POT files.
102	fjp	33605	* New translations started: Polish, Swedish, Vietnamese.
103			* First release of Greek and Korean translations.
104	fjp	33680	* Exclude Traditional Chinese translation as it was not updated.
105	fjp	33676	* Switch release name to Etch (3.1+δ).
106	fjp	31851
107	joeyh	32251	[ Joey Hess ]
108			* Update installation report template and instructions for etch.
109	fjp	31851
110	fjp	33680	-- Frans Pop <fjp@debian.org> Mon, 2 Jan 2006 18:44:59 +0100
111	joeyh	32251
112	fjp	31686	installation-guide (20051025) unstable; urgency=low
113	fjp	31625
114			* Mention in copyright that full GPL is included in the manual.
115			Closes: #334925
116			* Register installed documents with doc-base.
117	fjp	31686	* Minor updates in English text and translations.
118	fjp	31625
119	fjp	31686	-- Frans Pop <fjp@debian.org> Tue, 25 Oct 2005 17:37:25 +0200
120	fjp	31625
121	fjp	31509	installation-guide (20051019) unstable; urgency=low
122	joeyh	31240
123	fjp	31432	[ Joey Hess ]
124	joeyh	31240	* Split off from the debian-installer source package.
125	fjp	31249	See the changelog for debian-installer for older changelog entries.
126	joeyh	31240
127	fjp	31432	[ Frans Pop ]
128			* Change over to building arch all packages in section doc. Build separate
129			packages for each arch containing all translations.
130	fjp	31435	* Change package name to installation-guide.
131	fjp	31433	* Include translations already available on official website.
132	fjp	31432
133	fjp	31435	-- Frans Pop <fjp@debian.org> Tue, 18 Oct 2005 17:12:35 +0200