Parent Directory
| 
Revision Log
| Links to HEAD: | (view) (download) (annotate) |
| Sticky Revision: |
Restore lost results for ppc
pass/fail updates for l10n tests
report from holger; 2.6 powerpc floppies don't boot
rick thomas reports success on oldworld with businesscard
pass/fail updates for l10n tests
More pass tests for l10n 2.6 base system installs
Now 2.6 installs pass for languages using jfbterm Record the result for the first two : ar and bg
The last remaining l10 2.4 base install tests
Added netboot/pegasos/powerpc checklist.
Tested by Holger Levsen
A few more pass tests (2.4 base installs)
m68k/mac updates
More l10n pass (mostly missing 2.4 base system installs)
m68k/mac updates
Update pass/fail for some l10n 2.6 base system installs
r4k-ip22 netboot ok.
more s390 passes.
pass/fail update for l10n tests
Nicholas Breen tested r4k-ip22
Karsten tested r4k-kn04 (#299710).
mips/sb1-swarm-bn works, thanks Karsten Merker (#299696)
Babelbox pass of the day : all success for 2.4desktop installs...still 3 langs to run
SGI (r5k-ip22) works via serial
s390 tape install on Hercules pass
Netwinder graphics works
Cobalt lvm install: pass
Cobalt works. lowmem 1 doesn't work with 26 MB RAM anymore but this hardly matters since 26 MB RAM is an impossible combination anyway - and 32 works.
Babelbox results of last night : all 2.4 desktop installs from eu to zh_TW pass
full cd desktop install i386: pass
s390 generic install on Hercules pass
2.6 installs needs 52Mb for non lowmem mode
pass/fail updated to Truth for Russian/Ukrainian
pass/fail results of the day....some people work while others enculent les mouches on -devel
Update pass/fail for l10n base system tests
Update pass/fail for l10n base system tests
Update pass/fail for l10n 2.6 base system tests
Last 2.6 l10n tests for base system installs
A few more pass/fail for l10n install (2.6 base)
Update with the week-end babelbox tests
a64 cds tested
i386 floppy and access floppy installs
expended sparc testing from Jurij
Two installs on different i386 systems
Kyle tested ARM Netwinder (#299268)
2.6 lvm install, lvm root - pass
2.6 & lvm on software RAID1 (root & boot) - pass, but needed to enter device for LILO manually
2.6 Ukrainian(base) + software RAID (root & boot) - pass
Result for 32Mb 2.6 netinst : FAIL
Result for 2.6 48Mb netinst test
Update with my tests : 2.6 netinst
Add mention of 2.6 installs for 32Mb and 48Mb
hppa tested to the very limited extent I can
done as much testing of sparc and alpha as I'm able
merge bubulle's checks from trunk
the results of my testing so far today
fix build date
cleared all the old pass/fail notes for rc2
merge non-manual, non i18n documentation changes from trunk to sarge branch
branch for sarge
a few more things I've checked lately
some updates, add usb floppy
32MB and 48MB installs pass
begun my testing of the 20041027 initrd build
Welsh tests pass. These were the last release tests for l10n
Turkish and Ukrainian pass....one last test left..:-)
Spanish pass
Swedish pass
Two more : Slovak and Slovenian both pass
Serbian install pass. Uses Bosnian translations ATM. Console-cyrillic seems OK.
Russian install indeed works...Arrete de boire, Christian..
Russian install FAILS
Portuguese and Romanian pass
Polish and Portuguese of Brazil both pass
Let's say Persian "halfpass". After all, the install finishes with a Persian-speaking system, though we don't have Persian translations at the moment..:-)
Norwegian Nynorsk pass (but exim4 config screen severely broken) Persian fails (because missing characters in the font)
Northern Sami halfpass (display problems in and after 2nd stage. Norwegian Bokmal pass
Latvian is OK. Lithuanian fails (lt.kmap missing) but pass with US kbd
Korean pass (just need the correct jfbterm command line)
Traditional Chinese pass (just need the correct jfbterm command line)
Traditional Chinese still halfpass (do I use wrong jfbterm command line?)
Simplified Chinese pass (as long as jfbterm is used with the correct options)
Japanese pass (as long as jfbterm is used with the correct options)
Italian test pass. CJK languages needs new checks
Korean half-pass. See other CJK languages
Japanese halfpass (console unusable in Japanese, even after reboot and even with jfbterm)
Hungarian install OK after reboot..otherwise console is Latin 1
Indonesian install is OK
Update the pass/fail status.
English(\!\!) and Finnish both pass
Validated Czech, Danish, Dutch : all pass (cs OK after reboot because consoel reset to Latin-1 as usual)
Croatian is OK
Traditional Chinese half passes (Mojibake on console and jfbterm does not work...but installed system is OK)
Half-pass for Simplified Chinese (unusable console on installed system if LANG=zh_CN...jfbterm does not help)
Arabic and Catalan pass
Bulgarian tests pass
Bosnian tests pass
Basque install pass
Give result for Albanese check (fail...:-( )
add raid and lvm stuff that should work now (mostly) update changelog
- Move some files to a doc/devel subdirectory.
- Moved partman docs over from packages/partman, and build them as part
of the doc build process. Add build dep on debiandoc-sgml.
- Also moved in partman-auto recipe documentation.
- Added example preseed file for automated installs.
- Rewrote design.txt.
- and a few other minor changes
belated update
completed my testing
i386 netinst, 48 mb, and 2.6 businesscard ok kamion reports powerpc businesscard ok
32 mb installs ok businesscard ok
2.6 netinst and software raid ok
remove lvm+raid, not yet supported
linux probing still appears to work 2.6 netboot works, with a minor sbp2 glitch (bug filed)
various things that don't work..
some testing
I've done successful intalls, as have various people on -mips
did some resting
mips r4k-ip22 update
add s390 and amd64 add some "ok" based on very recent installation reports
* Joey Hess
- Work around a bug in genext2fs that causes it to produce 1441k floppies.
Closes: #262266
- Add ipv6-modules and wireless-tools-udeb back to net-drivers floppy.
update m68k checklist
the m68k issues are (apparently) not happening anymore
clear checklist for tc2
- Add pcmcia-cs to netboot initrd.
busybox and libd-i are in sarge now
remove fixed items
Kyle McMartin did a belated check of tc1 hppa cdrom, and it worked
update
remove some non-release-critical items
updates
Cobalt works
Tested at debconf
alpha update
sparc32 netboot is ok (marga) but sparc64 module loading is hosed, needs new busybox
mips update
various updates
add some more results, and some random errata-like issues
arm doesn't have md-modules:
23:15 < tbm> kyllikki: is there a good reason there's no md-modules d-i
package for netwinder?
23:15 < kyllikki> tbm: err ARM running md? what an amusing and silly idea
23:15 < tbm> kyllikki: why?
23:15 < kyllikki> tbm: only practical reasons...the cpu is so slow at
checksuming etc its not worth it
23:16 < tbm> kyllikki: well, what about LVM ?
23:16 < kyllikki> tbm: if you *really* think someones gonna use it on an
ARM system i would be happy to add some modules to the
config
23:17 < kyllikki> tbm: as I say no religiopus reasons just noone I know has
ever bothered
Differentiate between serial and graphics installs
Add more mips and arm points
updates on tested languages
32 mb install ok
Add some entries, and begin tracking tc1. (Much of this testing is thanks to Marga)
the stderr thing is no longer a problem update checklist
Drop LVM and RAID from powerpc testing, since parted doesn't support them on Mac disklabels at the moment.
add usb installs, formatting fixes
add some sparc stuff, proba bly incomplete
add checklist
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
| ViewVC Help | |
| Powered by ViewVC 1.1.5 |